HT2311 boot freezing after itunes 10.7 update

after installing nad rebooting my system with the new version of itunes. i get nothing but the grey apple screen and the wheel of eternity.
whats the best way to handle this?
running 10.7.(current) on 1,1 mac pro, ssd, and 10 gigs ram.
i unplugged all drives and tried and tried as well. any suggestions on getting back up and running?

this happenned to me also.  Also did the iOS 6 update....so not sure which caused the issues. Had to restore phone and backup.  First issues I found were that no music was put back on my iPhone. When I went to iTunes on my PC, notices I had lost my previous playlists.  Tried a suggested fix of dragging itunes Library files to desktop and importing them back into itunes, but got an error (-50). Not sure what else to do... to recover lost playlists. 

Similar Messages

  • Itunes freeze after 10.9.3 update...

    itunes freeze after 10.9.3 update...
    it seems looking for the store and then freeze...
    anyone else? suggestion?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Is anyone else having problems with there phone freezing after the 8.0 update?

    iis anyone else having problems with there phone freezing after the 8.0 update??

    Hello Chefboyharley,
    Thanks for the question. After reviewing your post, it sounds like the phone is unresponsive. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Not responding or does not turn on
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • MacBookPro boot issue after iTunes update

    MackBook Pro showing disc utility after iTunes Upgrade. Instead of restart, I am seeing disc utility.I am not sure if my data is safe if I choose reinstall option. Does it reinstall OS without touching data?

    Sorry for the late update.
    The issue was with the McAfee encryption agent. If you have it on your MacBook Pro and by any chance you need to reinstall/ upgrade the OS, it will not allow it. I was stuck in the situation where it prevented any re-installation or roll back. The issue was solved only when I could get the HD decrypted by McAfee support and uninstall the agent through their experts. Only when the agent was removed, I could upgrade the OS.
    Thank you Gnomish8 for your response.
    Thanks,
    - Gaikwad GV

  • Progress Bar freeze after 4.2.1 Update - any news?

    Hey Guys,
    any news on the progress par freeze after the installation of 4.2.1 on the iPad?
    After a horrible 8 hours(!) Backup phase, my iPad 3G 32 Gigabyte freezes after the progress bar reaches 80%. I tried to do a hard reset but it would just stuck at the same stage again after rebooting. My iPhone 4 synced just fine (5min. Backup-Phase to the max) and runs 4.2.1 without any hiccups. But the iPad, being once the love of my life, drives me MAD!!!!!
    What did you do? Try to sync it again or just wait some days until the progress bar advances? I`m fed up with OS Updates for now... HEEEELLLLPPP!

    Well, that didn't work. But in the process I cleaned up the folders that house my iTunes movies and music get rid of dupes, stuff I didn't want, and so on. However, I did find that I forgot to uninstall WiFi Sync before trying the upgrade. I downloaded the uninstaller and ran it, rebooted, and did the upgrade. Now my iPad is back. I hadn't realized that I had to uninstall WiFi Sync to upgrade the iPad.....

  • Slow boot time after 9.0.2 update

    My computer always booted up 22 seconds or less now takes 30 plus seconds after itunes update I have restarted and did a safe boot. this is a fresh install no 3rd party apps computer is 2weeks old what could be causing this the only thing I did was set up genius in itunes then turned it off by the way this is a new computer not the one listed in my info this is a 2.26macbook pro 4gb ram 320gb 7200 rpm drive any help would so be apreciated

    Resolved.  After updating to 9.0.2, I edited an image and saved it as a PSD, but when naming the file I put in a "3.5x4.5cm" in the file name, and it saved it as an unopenable 5CM file.  I just now took the same inage and saved it as a PSD, but omitted the "3.5x4.5cm" in the file name and it saved it just fine as a PSD.  The same also for the JPEG.  The problem had to be in the ".5cm" ending of the file name.  Doing the 9.0.2 update just happened to be the timing of the file name problem.
    Cheers - rjustiniano

  • After iTunes 7.6 update, iPhone is not recognized by iTunes

    I plugged in iPhone after iTunes update and a dialog box popped up that says "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the iPhone, then try again."
    Phone is 1.1.3 firmware (update earlier in week and all was working great).
    I have wiped software, cleaned registry keys, and reinstalled iTunes on XP computer. I ran a restore process on the iPhone and bricked it. Installed iTunes on a backup Vista 64 Ultimate machine (iTunes works on this platform now, yay!) and restored the phone.
    Still hosed on XP, however.

    This is happening to me too, but I have an iTouch though. I guess I will try to restore it on another computer if it worked for you.

  • After iTunes 10.6 update, program won't open

    I just downloaded the iTunes 10.6 update and now my iTunes will not open. The icon in my dock will jump a few times, as if the program were opening, but then nothing happens. Any fixes?

    I am having exactly the same problem. More specifically, after not loading, it comes up with the following message:
    "The iTunes application could not be opened. An unknown error occurred (13010)."
    Can anybody help?

  • IChat freezes after 10.5.5. update

    Since upgrading to 10.5.5, I have experienced freezes while video chatting in iChat. These freezes happen, on average, every 10-20 minutes. I never had this problem with 10.5.4. Anyone else noticing this? Any ideas of what may be causing this, or it just a bug that I should hope will be fixed in 10.5.6?

    Just wanted to add that I am experiencing this too. Everything was fine until the combined update to 10.5.5 and QT 7.5.5. Now my video freezes after about 30 seconds into a chat. The sound keeps going for a while. I need to force exit iChat to quit. The are a lot of suggestions on these and other forums about how to fix this: limiting streaming bandwidth, re-installing QT, deleting plist files, etc. Nothing seems to work. Here's what I know so far:
    1. Everything was fine until 10.5.5/QT7.5.5 update
    2. Not all connections fail. One buddy never fails, one other always does.
    3. Test user [email protected] freezes for me 9 out of 10 times.
    4. The 10th time it's fine.
    5. Shutting off WeatherDock does not fix it.
    6. QT streaming rate throttling in preferences does not fix it.
    7. Bandwidth limiting in iChat prefs don't fix it.
    8. Re-installing QT does not fix it.
    9. Re-installing QT in safe mode after fixing disk permissions doesn't fix it.
    10. No combination of the above fixes it.
    This is a problem the NEEDS TO BE FIXED, Apple are you listening?
    I bought a mac because they said "it just works", I guess not.
    I suggest we all send more complaints to Apple. I let the app debugger send its logs to apple a few times per day.

  • Macbook Boot Freeze after update 10.6.8

    I have a macbook pro A1226 Late 2007 running OSX 10.6.4 it runs this just fine however when i update to 10.6.8 or install lion it will not boot up. Just a grey screen spinwheel then freeze with different colors. It works fine when i plug in external monitor. I just dont understand how it works perfectly fine on 10.6.4 but will not update. Any thoughts?

    Try this:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Download and install Mac OS X 10.6.8 Update Combo v1.1. Now use Software Update to get all other updates for Snow Leopard.

  • ITunes Freezing after 10.5.5 update.

    After running the OS X software update seeded today, iTunes is freezing whenever I am on the iTunes store. I cannot force quit and I also lose control of the mouse after a couple of minutes. I have to force a restart by holding the power button down for several seconds. It has happened 4 times and now I am afraid of going to the online store. Anyone experiencing this problem? I am using iTunes 8.0 BTW. This is the first time I have had to force restart my computer or had iTunes freeze on me.
    How do I fix this?
    <Edited by Moderator>

    I looked on an older discussion regarding this problem (10.53 and itunes 7.xx-8) see discusssion
    http://discussions.apple.com/thread.jspa?threadID=1538111&tstart=0
    go to System Preferences, Network, Advanced, Proxies. Then get rid of the PAC setting by setting to manual and leaving the fields blank.
    This worked for me, though I previously have never had a problem in two years of owning this Mac.
    Obviously this is a known bug which appears to have re-surfaced.

  • ITunes freezes after 5.1.1 update

    I have an iPhone 4s and an iPad 2. Updated both to 5.1.1. Now iTunes on the phone freezes. Tried restart, killed all other apps but no effect. iPad 2 is working normally.

    Maybe it doesn't appear on an iOS device.  On a computer you see these controls:
    As for your problem, if it's only happening on your phone then you probably will have to restore it to get this fixed since the iTunes app is part of the iOS.  Restoring wipes the phone and puts a fresh copy of the iOS on it.  You have the option at the beginning (step 6 on this link: http://support.apple.com/kb/HT1414), then when your phone restarts at the end and you set it up again you have the option to restore it from an iTune backup (see photo below).  Select this option and restore to your backup.  You will still have to sync your phone to transfer iTunes content (Music, Apps, etc.) back to your phone.  If you choose to restore, be sure to back up your contacts by syncing them with iCloud or Google, or using an app like My Contacts Backup as these are not fully preserved in the iPhone backup.  Also, import your photos before restoring.

  • Brand new Macbook Pro freezes after iTunes-update??

    Updated itunes to 10.5.1 last night and now itunes and my brand new Macbook Pro freezes whenever I open iTunes. I got it last week and it has worked perfectly, but now it freezes and has trouble finding the wifi. What to do?? Can I somehow undo the update?

    Is this Java based game Runescape? I experience the same crashes, ive tried using other things in-game other than the OpenGl and i still experience crashes, much more often when i have iTunes running while trying to play. Ive never had problems like this before, even while using older computers with much less memory, etc.. This is my first mac and id have to say it's not leaving a good impression. I planned to be able to play some games on this and consider Runescape requires very low CPU this is kind of sad that a Mac can't process it without crashing. Ive been reading lots of similar posts online and it sounds like Apple should be worried more about customer satisfaction than their own stocks. Hope something works out soon!!

  • Itunes freezes after 1.0.2 update

    I had NO problems until the iPhone 1.0.2 update.
    Now when I connect the phone (and it finishes synchronizing)if I click on anything else in iTunes the whole machine freezes until I kill the iTunes process.
    I have already tried reinstalling iTunes latest version.
    Vista, iTunes 10.3.2, iPhone 8G.
    Please let me know if you have any idea what the problem could be.
    Thanks!

    I didn't think the new ipod classics would work with Windows 2000. I quote from the technical specifications:
    Windows system requirements
    PC with USB 2.0 port
    Windows Vista or Windows XP Home or Professional with Service Pack 2 or later
    iTunes 7.4 or later
    I seems odd that your ipod worked with 1.0.1 then ran into a Windows 2000 issue with 1.0.2 I don't have an answer but it might be worthwhile to ask Apple about this.

  • Tethering stopped working on windows 7 after itunes 10.7 update

    This problem seems to have been addressed many times in the forums for Apple OS, but not for Windows. Most reponses refer to the kext files which as I understand do not apply to Windows?
    I have an iphone 3G that I updated to IOS 6.0.1, and this also required me to update iTunes to 10.7. However after the update USB tethering no longer works, nor can I get USB hotspot to work. The driver installation repeatedly fails.

    Sorry I didn't update this sooner. Not sure exactly what worked, but what I did was uninstall some recent Windows Updates, uninstall the MotionInJoy drivers I was using to get a PS3 controller to work (I had read these drivers could be an issue), restarted at least once or twice, and FINALLY got Bluetooth working again. Then (re)updated Windows, but NOT the Bluetooth update that was available (perhaps I did the first time around, and perhaps it isn't Boot Camp friendly), and then reinstalled MotionInJoy, but kept the PS3 controller plugged in via USB, as when it goes Bluetooth, apparently it overwrites all other Bluetooth drivers, which could have been my original problem.
    Anyway, all of the above has been working just fine for a couple of weeks now, but I continue to avoid installing the available Bluetooth update via Windows Updates, just in case.

Maybe you are looking for

  • I keep getting error messages (error 400 was one) about ¾'s of the way through sending photos.

    I start again, same problem; then when I look at the log; my recipients have received duplicates and more of some of the photos. This confuses them and makes me look unprofessional. I take pride in my customer service and this is not working. I loved

  • Resizing datafile in a Physical Standby

    I have created a physical standby db for testing. One of the tests was to resize a dbf on the primary, knowing that the file could not extend on the standby due to space limitations. This has caused arch files not to be applied to the standby db. How

  • Quadro FX Can not Active Mercury Playback Engine in Pr CS5

    I work on Windows7 64Bit and installed Quadro FX 4800 Updated lastest Quadro Driver  259.57 but the button of Mercury Playback is always grayed out How to fix it?

  • Running Oracle report in Portal 3.0.8 cause session invalid

    Hi, We are runnung Oracle portal30 3.0.8 in Window 2000 environment. In one of the jsp portlet, We set up a href link to run Oracle Report ( /dev60cgi/rwcgi60.exe?server=... ) in another browser window. Once the report is submitted. the session got i

  • Event before save in maintainence

    Hello, I have a maintainence table and i have added one event, the event is before the save of the data into the table. i have to make some validations to the data that is going to be saved. where is the data before is inserted in the table?