HT2311 I had a problem last evening when updating iTunes on a laptop operating Windows 7 Home Premium.
The installation aborted with the following message:
Runtime Error!
Program C:/Program Files (x86)...
R6034
An application has made an attempt to load the C runtime library incorrectly.
I deleted the old version of iTunes and tried to download the latest version. During the setup I received the following message at the 'Starting services' stage
"Service Apple Mobile Device (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
Any suggestions gratefully received
Hey botony269,
When you uninstalled and reinstalled iTunes, did you use this article?
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you haven't already done these steps, this section contains information that might help your situation:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Regards,
Delgadoh
Similar Messages
-
I am having problems importing some CDs into iTunes on a laptop with Windows 8. Most CDs import without problem. The ones I can't import can be imported into iTunes with Windows 7. Does anybody know why this problem is occurring?
First-off, this seems to be a general problem with 10.4 (across all the operating systems of which I am aware). Unfortunately, I cannot provide a permanent solution but, if you need a quick fix, this will (hopefully) work for you.
For some inexplicable reason, iTunes no longer recognises standard Windows paths. For example:
Y:\Music\Buddy Holly\Buddy Holly - Rave On.mp3
The end result is that it will import a playlist with no content.
It will, however, recognise the equivalent Apple paths which look like this:
file://localhost/Y:/Buddy Holly/Buddy Holly - Rave On.mp3
It is possible to convert your existing playlists using a few basic replace commands in something like Notepad. In my case, I made some code changes in my music manager and now generate two sets of playslists (one standard and one to accommodate iTunes).
Forgive me foir stating the obvious but please remember to make sure that the disk / path containing your music is accessible when doing the import otherwise you will probably get a blank result. Note that you can do a bulk import by selecting all the (revised) playlists and dragging them onto the iTunes sidebar.
I am sorry that this is not a "clean" solution but it will work if you are in a bind. The only alternative of which I am aware is to wait for Apple to fix the problem. -
Can anyone help with the question, above? Why an error msg that "MSVCR80.dll is missing" when attempting to update iTunes to version 11.1.4 on my laptop?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
I have had photo problems since the ios7 update. everything was backed up to my icloud. went into store tech backed up but now when i go to icloud i can't find pictures or videos. 1300 pics and some video's . i am devasted.
Welcome to the Apple community cmruckie.
Have you restored from the back up. -
My iPhone is not snycing up to my iTunes like it used to thur my USB. I had this problem last week until I updated iTunes then it cleared up for a few days now its back. What can I do to fix it?
I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
i have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.
Might be corrupted preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.desktop.plist
Click Go then move the com.apple.desktop.plist file to the Trash.
Restart your Mac and try changing the desktop photo. -
When I start the iTunes program it comes up with this.. pls help!!
"The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem."
Even after reinstalling iTunes doesn't start!Repair your Apple Application Support.
Control Panel > Programs n Features (Win7) or Add n Remove Programs(XP) > highlight AAS, click CHANGE then REPAIR. -
IPHONE 5: can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network." This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off. ATT went through the standard protocol - resetting network, resetting sim card, etc. No changes. Other phones working fine in same region with same carrier. Apple's solution is to restore software, but haven't gone there yet. Anyone successfully addressed this/these issues?
I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.
-
anyone come across error 11 while trying to synch or update an IPhone 3GS that previously had not problems synching? Have reinstalled ITunes but to no avail...?
Seems that way. I think I am going to have to give in and spend hours on the phone with Apple support. I don't want to, but I am at a loss. I will share any discoveries...
-
After burning CD tried to print jeweled case insert and playlist is typed over. Never had this problem until most recent update to newest version of Itunes
Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
On Our shared laptop we had three music libraries. When I switch on the laptop this morning there were no libraries in itunes at all. It's as if ituned has installed itself from new and that we never had ipods? As far as I know no updates have been done. I restored the laptop back a couple of days and after restarting it still no libraries. How do I get them back please?
Try browsing out to and opening these alternate iTunes library using the instructions in this document.
How to open an alternate iTunes Library file or create a new one
B-rock -
Any problems with compatibility of update iTunes with OSX 10.7.5
Has anyone noticed any problems with compatibility of updated iTunes with OSX 10.7.5?
Okay. At the beginning of this discussion I was on 6.0.1. However, I responded to an update since then and since I didn't realize 6.0.2 wasn't compatible with Lion I responded and updated.
Now, with your message, a clean 6.0.1 installation sounds like a great idea. However, I've downloaded it from your link and when I install just from the install program, I still have an "About Safari" showing 6.0.2. I then tried setting up a separate Safari folder in the Applications folder and installed into that. I only got some Safari-associated folders and items there but no new Safari app icon... and the Safari 6.0.2 icon (which I hadn't gotten rid of since I don't want to lose my bookmarks, etc... want to transfer those once the 6.0.1 is there) is still there.
All the hanging-up problems are still happening, btw... and probably even worse. Right now I'm using Camino, a good browser but Safari has features I'd like to get back to... got Firefox, too, and like it, but I've got it set up for other family members to use and Safari here for me.
Any help on how to get 6.0.1 installed again without losing bookmarks greatly appreciated. -
My ipod shuffle (1st generation) will not restore. It says it is corrupted(error 1442) Is it possible to correct this problem, or is it beyond repair. It worked last time I used it on my laptop with Windows Vista. Any help would be much appreciated.
Im actually tilting it up where it cinnects to my iPod, not where it connects to my computer, and i have tried three(yes, 3) different cables, one of which i bought brand new. still nothing, and i've also tried different USB ports on my computer,....nothing. Could this simply be a hardware failure of somekind? maybe a physical problem...i mean, why would i have to tilt the cable in order for my computer to actually read my iPod? im looking at the USB connector on my iPod (maybe it's my imagination, not sure) it possible might be bent, the little metal part in the port.
-
R5034 Runtime error when updating ITunes help - deleted all iTunes/Apple programs and reinstalled ITunes
help please ?solved problems and reinstalled - 4 hours wasted trying to fix iTunes ...
Apple could do better to inform users when updating and upgrading ..... -
When updating iTunes on my Windows PC, I am getting a M/S Visual C runtime error...can anyone suggest how to fix it?
It has been discussed a few times, and is even available in the Apple support web site. Basically, you need to un-install all teh Apple software you have installed, then re-install it all. When you re-install, right click on theinstaller and select "Run as Administrator" to make sure it has The proper rights to complete the installation.
Maybe you are looking for
-
Trying partion drive on early 2008 Macbook and the Bootcamp wants me to back up HDD then run assistant then reload the HDD? I have never done the bootcamp partition and i need help. Thanks Karl
-
Do I have to Purchase all of my Apps again?
I've made a new .Me account and want to start using that. Problem though is that I've made a couple of purchases for applications for my iphone. Am I really going to have to purchase them all again?
-
Advance payment before delivery date
Hello experts, I have a requirement that after creating PO I need to make advance payment 2 days before receiving goods(delivery date) in case of local vendors, whereas in case of International vendors I need to make advance payment 8 days before del
-
Hi Experts, I would like to know if there's a way in modifying the screen 0152 for program SAPLCSDI of transaction CS01, CS02 and CS03. We would like to make the field RC29P-AUSCH - Component Scrap to be displayed as one of the columns in the item di
-
Error in opening layout in interactive smart forms
Hi all, I am trying to use intractive adobe forms in IDES version SAP 6.0 ECC but it is throwing an error stating that cannot be opened but when i am trying to open it in my development server I was able to open it , Please suggest me what are the ch