HT2311 I tunes error message Version Upgrade to 10.6.3

How do i download itunes version 10.6.3? I have a mac Osx with Itunes version 10.5.8
Any help would be appreciated.

A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3

Similar Messages

Problem installing i tunes Error message in Dialoque Box

Problem installing i tunes Error message in a Error Box "Installation source for this product not available, verify source exisits , - The feature you are trying to use is on a network resourse that is unavaialble
Also message reads Installation source for this product is not available, verify source exists
I have tried to unistall I tunes using Revo Uninstaller, and get the same message box as when I'mtrying to install I tunes
I have downloaded the latest version, but cannot install it, I have tried to re -install from my computer an old version, but a message come back stating a newer version is already installed, have selected the two boxes in the Dialoque box and the same message comes back
Please help

"Installation source for this product not available, verify source exisits , - The feature you are trying to use is on a network resourse that is unavaialble
Which particular .msi file (or files) does the message (or messages) go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

Error message when upgrading to 7.3.2.6

I just (attempted to) upgrade to 7.3.2.6 (and after the install, it all seems OK for now) - but during the install, I got a "files in use" error message window, mentioning that Windows Explorer was running (Process Id: 432), giving me the option to Retry, Ignore or Exit.
I tried all options - I even Exited and rebooted - and re-upgraded after that, but keep getting the same error... So far iTunes seems to have upgraded and appears to be working - but could the install have missed some components now - and therefore should I expect trouble ahead?

Yes, i had the same error message after upgrading to 7.3.
I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
Search this forum - i hope you find a solution.

Error message after upgrading to 7.3

i upgraded to iTunes 7.3 and i got a message that said something about some files were missing and i needed to uninstall and try again. i uninstalled it and now i can't even download iTunes. i can download but i can't do anything else. anybody else having this problem?

Yes, i had the same error message after upgrading to 7.3.
I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
Search this forum - i hope you find a solution.

'Bluetooth not available' error message since upgrading to Leopard

Hi, I regularly seem to get a 'Bluetooth not available' error message since upgrading to Leopard, any ideas why, have to reboot to shake it.
cheers
Simon

I solved the same issue by resetting the SMC. With the computer off, remove the battery and press and hold the power button for 5 seconds. Then reinstall the battery and restart. I haven't had any bluetooth issues since.

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.

I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R

Error Message " please upgrade the latest version of isync"

hello,
have download a isync software from nokia website, but when i am trying to install the error message ask me to upgrade my isync. Problem is i try many times on software update but there is nothing to be update. My current Isync software version is 3.0.2.
FYI, i have try to remove my current isync then install new one but still does not work.
Please help

Make sure the iSync application is in your main Applications folder, not in any sub-folder. You should never move Apple apps from their default locations.

Error message after Upgraded from 2.53ghz (533 FSB) to 3.2ghz (HT)

Hi! everyone,
As you can see i'm a newbie on this board, however I've frequently visited here once in a while. Anyway, the problem I currently have after I upgraded my cpu from 2.53 ghz to 3.2ghz HT (Northwood) is that I not very often (few times so forth since monday) see this error message after reboot my pc :
***Message starts here***
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error restart your computer. If this message appears again, follow these step:
Run system diagnostic utility supplied by your hardware manufacturer. In particularly run a memory check and check for faulty or mismatched memory, try changing video adapters.
Disable or remove any newly installed hardware or drivers....etc.
Technical information
***STOP: 0x0000007F (0x00000008, 0xF7806d70, 0x00000000, 0x00000000)
....................................... ........etc.....
****Message ends here****
As i stated before I've never seen this message before the upgrade. So, here is my configurations:
BEFORE
875P NEO-LSR w/ BIOS v. 2.0
2.53ghz 512 FSB CPU
9500 Readon 128mb video card
Dual IDE HD 80gb & 160 gb (NON SATA)
1gb Dual channel memory (512mb on channel 1 - 512mb on channel 3) (KINGSTON pc2700 module)
CURRENT
857P NEO-LSR w/BIOS v. 2.0
3.2ghz 800 FSB 512mb (L2 cache) CPU
9500 Readon 128mb video card
Dual IDE HD 80gb & 160 gb (NON SATA)
1gb Dual channel memory (512mb stick on channel 1 - 512mb stick on channel 3) (KINGSTON pc2700 module) *
* may be this causes this error message because as I read it on the discription page of the 875P NEO-LSR that it will only support DUAL channel (PC3200 type) with HT CPU. So, i suspect this may cause the problem but I havent try to rearrange my memory to one channel (1 x 2) yet.
I will greatly appreciate it if someone in here who may has experienced it before or know what all this means. Please advise

Thanks for your advise bejon2000.
Here is my situation, I just freshly installed Windows XP Pro w/SP2 prior to this cpu upgrade ...I did the os last weekend and upgraded the cpu the day or two after which is monday of this week. So, can I just do the BIOS update now with the os already inplaced ??? I assum the aswer is yes, however I just wanted to confirm before I do it, you know
I've SiSoftware Utilities 2004 installed on the system as well, and after I did the Performance Tune-Up in SiSoftware ...This is what I got
SiSoftware Sandra
Display on Screen
Device Type : Desktop/Notebook
System Summary
Analysing...
Tip 2546 : Large memory modules should be ECC/Parity.
Finished Successfully : Yes
****Mainboard Information
Analysing...
Power / Aux Temperature : 59.0°C / 138.2°F
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2505 : System does not support memory error detection. Some memory errors may go unnoticed.
Warning 2506 : System does not support memory error correction. System will stop if memory errors are found.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Tip 2546 : Large memory modules should be ECC/Parity.
Warning 2518 : Mainboard temperature is too high.
Finished Successfully : Yes
***CPU & BIOS Information
Analysing...
Tip 210 : Processor 1 : Mainboard supports faster CPUs, so the CPU can be upgraded when needed.
Notice 224 : Processor 1 : SMBIOS/DMI information may be inaccurate.
Notice 224 : System BIOS : SMBIOS/DMI information may be inaccurate.
Tip 212 : System BIOS : BIOS can be shadowed so check whether it is.
Tip 211 : System BIOS : BIOS is flash-able and socketed so it can be upgraded when needed.
Finised Successfully : Yes
APM & ACPI Information
Analysing...
Notice 224 : SMBIOS/DMI information may be inaccurate.
Finished Successfully : Yes
PCI, AGP, CardBus Bus(es) Information
Analysing...
Finished Successfully : Yes
Video System Information
Analysing...
Tip 319 : Primary Display Driver (display) : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 323 : Primary Display Driver (display) : Remove the desktop wallpaper to save memory and improve performance.
Tip 319 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : A refresh rate of at least 75Hz is recommended. Increase it if possible.
Tip 323 : RADEON 9500 (\\.\DISPLAY1) @ \\.\DISPLAY1 : Remove the desktop wallpaper to save memory and improve performance.
Finished Successfully : Yes
Windows Memory Information
Analysing...
Finished Successfully : Yes
Drives Information
Analysing...
Warning : 1.44MB 3.5" (A:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Warning : CD-ROM/DVD (F:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Warning : Removable Drive (G:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted.
Tip 1821 : Removable Drive (H:) : Label (name) drive.
Finished Successfully : Yes
Ports Information
Analysing...
Warning : Communications Port (COM1) : Port in use. [5]
Finished Successfully : Yes
Keyboard Information
Analysing...
Finished Successfully : Yes
Mouse Information
Analysing...
Finished Successfully : Yes
Sound Card Information
Analysing...
Finished Successfully : Yes
Printer and Fax Information
Analysing...
Tip 402 : PaperPort Color : Print quality may have been set too low. Check settings.
Finished Successfully : Yes
MCI Devices Information
Analysing...
Finished Successfully : Yes
Windows Information
Analysing...
Tip 1300 : Enter your company name or "Home" instead of "Unknown".
Finished Successfully : Yes
WinSock Information
Analysing...
Finished Successfully : Yes
Processes Information
Analysing...
Tip 1601 : 6. tinhbuon0e - ********* - Winamp [Stopped] : Program consumes a large amount of memory.
Tip 1601 : Adobe Photoshop - [main.psd @ 90.9% (Layer 4, RGB/8)] : Program consumes a large amount of memory.
Tip 1601 : Adobe ImageReady : Program consumes a large amount of memory.
Finished Successfully : Yes
Modules Information
Analysing...
Finished Successfully : Yes
OLE Information
Analysing...
Finished Successfully : Yes
DirectX Information
Analysing...
Finished Successfully : Yes
Network Information
Analysing...
Finished Successfully : Yes
SCSI Information
Analysing...
Warning 2600 : WDC WD80 0JB-00CRA1 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : Maxtor 6 Y160P0 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : TOSHIBA DVD-ROM SD-M1712 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Warning 2600 : PLEXTOR DVDR PX-716A : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device.
Finished Successfully : Yes
Font Information
Analysing...
Finished Successfully : Yes
CMOS Information
Analysing...
Finished Successfully : Yes
OpenGL Video Information
Analysing...
Finished Successfully : Yes
Services Information
Analysing...
Tip 2130 : Alerter : Service may be disabled on Home/Professional OS version.
Tip 2130 : Error Reporting Service : Service may be disabled on Home/Professional OS version.
Tip 2130 : Help and Support : Service may be disabled on Home/Professional OS version.
Tip 2130 : Removable Storage : Service may be disabled on Home/Professional OS version.
Tip 2130 : IPSEC Services : Service may be disabled on Home/Professional OS version.
Tip 2130 : Remote Registry : Service may be disabled on Home/Professional OS version.
Tip 2130 : Secondary Logon : Service may be disabled on Home/Professional OS version.
Tip 2130 : Windows Image Acquisition (WIA) : Service may be disabled on Home/Professional OS version.
Tip 2130 : Distributed Link Tracking Client : Service may be disabled on Home/Professional OS version.
Finished Successfully : Yes
ATA/ATAPI Information
Analysing...
Warning 3100 : ATA device (fixed) : SMART not enabled; consider enabling for safety.
Warning 3103 : ATA device (fixed) : Acoustic Management enabled. Peformance may be impaired.
Finished Successfully : Yes
Data Sources Information
Analysing...
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Error : Could not connect to the database. : Could not connect to the database.
Tip 3001 : ODBC Information : ODBC driver support old; should support ODBC 3.52 or later.
Error : Tables/Views : No tables/views found.
Error : Procedures/Functions : No procedures/functions found.
Finished Successfully : Yes
Hardware IRQ Settings
Analysing...
Finished Successfully : Yes
DMA Settings
Analysing...
Finished Successfully : Yes
I/O Settings
Analysing...
Finished Successfully : Yes
Memory Resources
Analysing...
Finished Successfully : Yes
Plug & Play Enumerator
Analysing...
Finished Successfully : Yes
Performance Tune-up Wizard
Finished Successfully : Yes
There are actually some notices on MAINBOARD INFORMATION & CPU & BIOS INFORMATION, however I'm not sure what exactly they mean though.
******UPDATED*****
here is the last part of the error that i described in my first post, I just saw it again right now
****STOP: 0x.......
**** sysaudio.sys - Address F6EAA481 base at F6EA7000, Datestamp 41107F1a
Beginning dump of physical memory
Dumping physical memory to disk: (counting from 1 to 99 then it shut down the computer)

Error message when upgrading to Tiger

Hello,
I have an iMac G5 running 10.3.9 and I'm finally getting around to upgrading it to tiger. I've installed everything in software update, so I should be completely up to date, and I have all the RAM and hard drive space the apple support page says I need. Whenever I restart my computer with the system install CD, however, the error message appears: "ALERT: This software cannot be installed on this computer" and I can't get any further than that. The very latest firmware updates are for computer running system 9, aren't they? I can't think of why I'm getting this error.

This software cannot be installed on this computer
Rosasharn, welcome, the computer is questioning the validity of your CD. Is it a full retail version of Tiger? Where did you get the CD? What color is the CD? And what does it say?
Joe
Mac Pro 2.66 Ghz Mac OS X (10.4.10) Users (RAID 0), PM G4 (10.3.9, PM 6500 (10.2.8)

Dyld Error Message since upgrade

Hi,
Upgraded to SL. Mostly OK, but some applications (Apple Motion, Compressor, Aperture) all crash with same message:
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Motion.app/Contents/MacOS/Motion
Reason: image not found
Well, its right. The image is not there. But presumably it was before upgrading. Anyone know a simple way to fix this?
Thanks,
Dan

What versions of these programs do you have?
Also, can you post the whole crash log here?
In your home folder, Library/Logs/DiagnosticReports/

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Error message when upgrading to the latest itunes

i've been attempting to upgrade my old itunes to the latest one, as i have a new ipod which needs the latest progrm to run. it seems to download alright but when i click 'run' at the end of the install it gives the error message -
invalid drive : F:/
does anyone have any ideas how to make it download? or if not is there a way to make my new ipod run on my older itunes system, thanks.

It is possible that the registry setting for one of your special folders is pointing at a drive that is not available.
Try downloading TweakUI form Microsoft. This lets you set the location of special folders:
It is one of the download here:
http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx
This Apple article about something else tells you how to use it:
http://docs.info.apple.com/article.html?artnum=302398
Check that My Documents, My Music and My Pictures are not set to drive f:.
Surpisingly My Pictures is one that is often wrong.

Error message when upgrading

I keep getting an error message "there was an error opening the database for the library "/pictures/aperture library.aplibrary". I have deleted some preference items per other posts and apple online articles but to no avail. The upgrade stops working on step 7 and then I get the warning message listed above. Thanks in advance for any help anyone can provide. I cannot do a rebuild because I can't access that screen.

Hi , here is the problem..... The firmware 1.52.02 is for the model no BEFW11S4 V4.0 and i believe you have BEFW11S4 V3.0...
Download the firmware 1.45.10 for BEFW11S4 V3.0 and you should be able to upgrade the firmware successfully.

Error message when upgrading Acrobat 9

Why do I get error message 1402 when I try to upgrade Acrobat 9 Standard?

Hello,
Please refer http://helpx.adobe.com/acrobat/kb/error-1402-error-1406-acrobat.html
-Yuvraj

Error Message When Upgrading Firmware for BEFW114S

To all,
I have a BEFW114S with a firmware 1.42.7 which I wanted to upgrade to 1.52.02 However, I got the following error message when I tried update the firmware:
Message: Warning! Upgrade File Pattern Error
Any ideas of what might be causing this.
Thanks.
Babylon5

Hi , here is the problem..... The firmware 1.52.02 is for the model no BEFW11S4 V4.0 and i believe you have BEFW11S4 V3.0...
Download the firmware 1.45.10 for BEFW11S4 V3.0 and you should be able to upgrade the firmware successfully.

HT2311 I tunes error message Version Upgrade to 10.6.3

Similar Messages

Maybe you are looking for