HT2347 USB mouse not detected

I just got my new Mac mini today and when trying to set it up, I keep getting asked to turn on my Magic Mouse or my trackpad. I didn't buy either yet, as I figured I would use my old wired mouse for now. Any thoughts on why it won't detect my mouse? Te mouse is getting power... The laser is red underneath.
Help!

Thanks RRFS, that's an interesting thought. The mouse is pretty old. I'll try something newer tomorrow... We'll see what kind of mood I'm in when I go to best buy. I might just suck it up and get the track pad now. Will let you know.
Tanks!

Similar Messages

Mouse not detected

on startup I get this on the screen "Mouse not Detected" and my touchpad and keyboard will not work. Any help with this would be grateful
Thanks
Steve

Hi,
Hope this helps:
http://answers.yahoo.com/question/index?qid=20071226003704AAtR5vL
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp probook 4410 mouse not detected issue

hi, my hp probook 4410s mouse not detected "shows while post. tried with the link update from the hp website. but it did not work. pls help

Hi,
Are you talking about an external mouse or the touchpad ? If an external mouse, what is it ?
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Macbook pro Late 2011 13.3 inch i7 keyboard and trackpad not working bluetooth showing a cross sign and no usb mouse is detected. Almost dead keyboard and mouse. Earlier same problem used to be solved by opening the lower cover and closing it.

My macbook pro 13.3 inch i7 late 2011 edition has previously encountered unresponsive trackpad and keyboard. To solve that, I used to open the back cover and then close it. It has been working fine since that. Yesterday, same thing happened, this time I noticed that bluetooth icon is showing a cross sign across it and keyboard and trackpad were unesponsive. After some time , everything worked fine and bluetooth sign was back to normal. Then , suddenly it went back to the problem. I shut it down by holding the power button. When I booted it again, I could not login because keyboard and trackpad were not working. I attached a HP mouse it didnt work. I opened the back cover disconnected the battery and then connected it again, didnt worked. Since then , I have tried many things and nothing has solved the problem.

@sanjampet
As you suggested I reset the smc, in the first boot nothing worked. In the second boot, it all worked like a charm. I thought that my problem is resolved now. To test it, I shut it down properly. Next morning, I powered it on, all things i.e, keyboard, trackpad, bluetooth etc. worked and I thought that problem has been solved. When I was just going to visit apple forum to reply you, the same problem reappeared. A sawtooth cross over bluetooth icon, keyboard not working, trackpad not working,no usb mouse working which worked well when it was fine. I reset smc so many times again and again but same problem continued. Isn't it a problem of the firmware?
Next time when it will work, I will update its firmware.
My macbook was bought in dec2011 so no warranty now.

No usb mouse/keyboard detection on K8n Diamond

My logitech ultrax wireless media desktop ( infrared combined reciever, only one usb port) does not be detected with a computer reboot .
When i switch in the bios" usb mouse detection" at disable ( or !!) enable, it works for a while but a few reboots later is stops working again.
Already updated and reinstalled the driver.
someone with the solution ??
Thanks
Hans

Hi,
My first question is...why so many re-boots?
I have a wireless USB K/B and mouse similar to yours.
If my system ever froze (it no longer does this btw) on restarting the PC the K/b would not be seen in BIOS startup.
You can solve this by doing the following after turning off your PC.
Simply reach around the back of your PC and switch off the PSU power switch for at least 10 seconds.
Then turn it back on and power up the system using the regular power switch on the front of the case.
Voila...the system sees the keyboard...without the need for a CMOS reset.
It all has something to do with the PSU maintaining power to the USB ports/devices when the PC is shutdown...this is for components such as USB modems/routers or similar devices.
It takes a PSU power down to reset the relevant USB component circuitry.
Meanwhile, there might be an issue with your system stability if you keep having to reboot.
K6dude

USB Devices Not Detected and High CPU Usage

Hello, I'm using arch on a Dell 1720 laptop.
I have some weird issues involving detection of USB devices.
When the laptop is on battery and I plug in a USB mouse the power flickers on and flickers off again; nothing in the logs/dmesg.
If I then connect the AC adapter the reconnect the mouse, the same happens, except the CPU usage hits 87%+ on one core.
Running
sudo rmmod ehci_hcd
solves the problem; the CPU usage drops and the mouse gets detected.
Subsequent attempts to hotplug USB devices does nothing, no high CPU and no Power.
Rebooting the computer is the only way to use USB devices at the moment.
usb-autosuspend is disabled in laptop-mode.
uname -a:
Linux MatSalleh 2.6.39-ck #1 SMP PREEMPT Sun Jun 5 18:30:30 EDT 2011 x86_64 Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz GenuineIntel GNU/Linux
The same happens with the stock kernel too
My kernel line in grub:
kernel /vmlinuz26-ck root=/dev/sda3 elevator=bfq ro resume=/dev/sda2
Any ideas?
Thanks,
Chris.

lilsirecho wrote:Perhaps the USB connector is damaged, causing excess power drain suggesting that the current limiter isn't functioning.
I highly doubt it's that, it was working fine on ubuntu just days before...
tydell wrote:I had similar problem with USB pendrive, it wasn't detected and it makes high cpu usage. It was problem with ehci_hcd module
This one helps me to solve this problem
My USB devices don't even get detected, so that script won't work.
Last night I hibernated my computer after not using any USB devices, on resume, my CPU usage was 100%, removing the ehci_hcd module fixed it.
Any more ideas?
I'm tempted to build a vanilla kernel...

USB mouse not recognized in windows 8.1 - tried all no help

Hi,
I am having this issue for 2 weeks now. Plugging the muse to USB port didn't make any difference to system, it hasn't been seen at all (noting in dev manager, no beep etc). I was connecting same mouse using PS/2 adapter and worked well.
After doing UEFI bios update and installing latest drivers for motherboard mouse is shown in device manager as "Not Recognized" Code 43. I did try to use different USB mouse, same story, playing with drivers, deleting/uninstalling in Device Manager
didn't make any change. Deleted all USB devices/Hubs used generic drivers suggested by windows didn't change anything as well. Windows Troubleshooter see problem - but don't give options to fix it. System is up to date with windows updates, no new software
was installed. Changed as well Power settings regards to USB ports but no help
A lot of people suggest to go to UEFI Bios and changing USB settings of xHCI to disabled/enabled/auto - well none of this worked for me.
Anyone has any other clue which is worth to try?
Seen somewhere that locating USB port VID/PID (from dev manager) then Find it in Registry and edit "Power Settings" fix problem for some - can see VID/PID for this mouse in registry - but no editable settings there.
Thank you in advance
Marcin

Hello Marcin,
Can you use other devices normally like USB keyboard and USB driver?
If you can, please contact the manufacturer and check if there are hardware issues.
About the error code 43 in device manager, please take a look at the following KB.
http://support.microsoft.com/kb/310123/en-us
One of the drivers controlling the device notified the operating system that the device failed in some manner.
If you have already run the Troubleshooting Wizard, you might want to check the hardware documentation for more information about diagnosing the problem.
When you try the Windows troubleshooter, what problem do you see?
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

USB devices not detected in VMware [SOLVED; Using Virtualbox instead]

I am running Arch as a host and XP on VMWare workstation 7. My primary purpose of installing XP on VMWare was to use my edit my Line6 POD (behaves as a usb sound card) and get my USB TV Tuner box to work. The big problem that I am facing is that VMWare is not detecting any USB device (not even my USB Hard Drive).
I have the usb controller installed.
Any suggestions?
Last edited by devadittya (2009-11-24 20:04:45)

I don't know vmware but with other virtual machines there is often a configuration option whether usb drives should be automatically mounted or not. Sometimes automounting also only works if the vm has the focus, i.e. is the active window.

USB Mouse not work with Mac OS 10.6

I have a USB mouse can work with Mac OS 10.4 but cannot with Mac OS 10.6. Noticed the different is the USB mouse motion reporting is 12-bit instead of 8-bit. It can definitely work on Windows with standard USB HID driver. I wonder if the OS 10.6 is having a different USB HID driver specification which is not posted in USB-IF.

Ask the Vendor.

Phone USB disconnect not detected

On my one PC, PC Suite does not detect when I disconnect my E51 phone from the USB cable in PC Sync mode.
This one happens on this specific PC, so it must be a setup problem there.
I am running PC suite 6.85.14.1 on WinXP SP2 patched up to date. No problem on another box with same motherboard and software using the same phone.
If I connect in data transfer mode, I use the "safely remove hardware" function of WinXP before I disconnect and all is fine. This is not available in PC Suite mode.
If I unplug the cable from the phone in PC suite mode, PC Suite does not detect that the phone is disconnected, no matter how long I wait.
After this, the whole USB system seems to be confused. No other USB devices are detected when plugged into any other USB port. After reboot all is fine again.
I guess this is a Windows problem rather than a PC suite problem.
Any idea what is going wrong and how to correct this?

i had other similar problem with usb devices, maybe when we use more usb devices could be a conflict on system, does exist a tool that clean up all old usb connection?
bye.

USB Mouse not waking display on Macbook Pro

Only a minor bug in Lion but when my display is in sleep the USB Mouse does not wake it. I have to move my finger on the Trackpad in order to wake the display.
Tried with several mice. Same result each time.
Anyone else noticed this?

Mmm…I find it useful. I want my screen off so that it doesn't blind me. It's a lot easier to just bump a mouse and have the screen turn on than to actually make a click. It's really not that annoying…but that's just my experience.

Hp Pavilion DV4-1235ee No sound & Usb port not detecting.

In my laptop Hp Pavilion dv4-1235ee there is no sound coming from the internal speakers. If I connect external speaker its works fine. Usb port is not detecting now. any help will be appreciated.

What is the current Operating system on your notebook? I suspect we have issue with internal speaker on hand...but would like to reinstall the Audio Driver and check...
Again for the USB, we can try and install Chipset driver and check...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

USB mouse not recognice by windows

Hello since the last Bios update windows doesn't recognice the usb mouse. Somebody help me please!
Solved!
Go to Solution.

What machine are we discussing here to begin with?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Usb mouse not recogized on 8600 PowerMac

Hi all
My usb mouse is not reconized when I start up my 8600 Mac.
I have a usb pci card connected properly. I get a message that device not found and no drivers are found. Please help.
Thanks
web dude

Hi, Web dude -
Did your card come with any software for OS 9? If so, has it been installed?
Sometimes resetting PRAM will help a Mac recognize new or changed hardware.
Although this user tip by Joerg Weise is directed toward USB Mass Storage devices, adjusting the extension set as suggested may help in this instance -
http://discussions.apple.com/thread.jspa?messageID=607556&
If your card was added after you last installed OS 9.2.x, you might try re-installing it again on top of the exisitng OS. With the card then in the machine, only-when-needed files may get installed.

X220: external USB keyboard not detected in BIOS

Hi!
I use an external USB keyboard attached to the port replicator of my X220. When Windows is booted the keyboard works without any problems. But I cannot use the keyboard pre-boot, e.g. to enter the HDD password after starting up, to configure the BIOS, etc.
I tried all USB ports both of the port replicator and the X220. The keyboard is still not detected by the BIOS (Version 1.20) and there are no BIOS options to enable "USB keyboard support".
Has anyone experienced similar problems? Are there any solutions to get the keyboard detected by the BIOS?
Thank you for your support!

@beastiesoft and earthartja,
If I am not mistaken, we are discussing this on the T series thread. Check here.
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-Not-recognizing-keyboard-before-OS-loa...
@someotherguy,
Drop you an email on this.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

HT2347 USB mouse not detected

Similar Messages

Maybe you are looking for