HT2375 key rig 49 does not work?

how to set up key rig 49 M audio keyboard with logic pro9?

Apple has probably changed something in terms of USB compatibility.
Nothing shows up in Logic's transport (note names...etc) when you press the keys?

Similar Messages

Short key for copy does not work all the time now.

After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time. It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac. Please help.

I've plugged in my default mac keyboard and the short key copy still does not work.

Key fn + Backspace does not work with apple wireless keyboard

Hello,
I want to user the WIndows Key DEL. However, the apple wireless keyboard dosn't have such a key. I read, that FN + Backspace will solve this. It does not work on my apple wireless keyboard. I'm using BootCamp 3.2 and WIndows XP, running on a Mac Mini 2010.
In addition, I also read, that FN + Cursor Left sould work like POS1. But this doesn't work, too.
Windows shows for the keyboard: Deutsch (Apple)
Regards Dirk

Hi mate,
This worked for me:
http://code.google.com/p/uawks/
Cheers,
Anthony

Shortcut key Ctrl+L does not work. How to fix it?

In my Photoshop Elements 9 and Photoshop Elements 11, The shortcut key Ctrl+L for Level does not work. I press it, the Level does not show up. How may I fix it?

1. Make sure that your image is in RGB mode. Go to Image Menu>Mode>RGB.
2. Check that no two layers are selected in the layers panel.
Even then the shortcut does not work , then it that case you can always use the workaround "Enhance Menu>Adjust Lightening>Levels.

Wep key and wpa does not work.

I'm trying to set up security for my router using wep or wpa but everytime I set it up, my key does not work. The router is suddenly disabled. I did exactly as the how to setup wireless security said. do u have to hard reset to get it to work. I've been trying to set security for three days. Your help is appreciated.

First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
For WEP, you must enter WEP "key 1" (found in the router) into your computer, not the WEP password or passphrase.
For WPA or WPA2, enter the key (sometimes called password or passphrase) into your computer.
Note that for WPA or WPA2, use "personal", not "enterprise".
Also, nomenclature sometimes causes problems. Note the following:
WPA = WPA with TKIP = PSK
WPA2 = WPA with AES = PSK2
Also note that Windows XP requires SP3 to run WPA2 ( = WPA with AES).
Also, each time you try a new encryption method, you must remove old settings from your computer. To do this, do the following:
In the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will remove any old settings). Reboot computer. Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. You should connect automatically (it can take up to two minutes). If you still have trouble, in the computer, temporarily turn off your computer software firewall, and see if that helps.
If the above does not fix your problem, download and install the latest driver for your wireless card.

App Store "Option key for purchase" does not work to reinsatll Lion

Hello,
I was able to re-install Lion from the App Store
by holding the "option key" while clicking on "Prchased" in the App store
Since I upgraded to 10.7.1 this does not work anymore !
Is it the upgrade to 10.7.1 that"s preventing a new download ?
or
Is it Apple that cancelled that access ?
One way or the other how do I reinsatll Lion ?
Note: I have too many partition on my drive, so it did not create a "restore HD" for LIon
Thanks

My problem was resolved the following day, today. I went to the App Store then to Purchased. The associated button said Resume. Yesterday that had been totally unresponsive but today when I clicked it the download resumed for another minute or two and then Lion just installed. I presume that the system was just being pushed to the limit and beyond yeasterday.
I hope that you have solved your difficulty - good luck!

Control key (^) combined shortcuts does not work on mac book pro

All shortcut combinations with the control key (^) do not work. I´m using Mac Book Pro 13 (late 2013) with Os X Mavericks 10.9.4

The Logic Board is the Main system board. In the Windows world better known as the Motherboard. Except with Apple Mac computers the CPU and the GPU are Soldered to the logic board and if it is a Retina screen model the RAM is also Soldered to it.
So replacing the Logic board is like replacing the compete system and costs accordingly.
But there isn't much else you can do if you can't get that switch unstuck. Or just go without sound from the built in speakers. They aren't that good anyway.

Premiere Elements 7: track matte key video effect does not work?

I want to use the track matte key video effect to fade out some cropped video clips. So I did a test:
first track: video clip
second track: PNG file, black with white circle
third track: video clip with FX with second track (here: Video 5) and luminance
As you can see in the picture the small preview pic above the effects shows the effect like I expected: a circle with the content of the third, lowest, clip. But the large video preview shows the first clip.
What did I do wrong?
I tested other settings and track orders. No efforts.

Bill, thanks again for your help! Good tutorial. That's what I need in principle! My try was a bit more complicated ...
But I can't help. The white area stays (see screenshot top left corner). Only some of the small blurred area around the shape shines through as I could see playing around without blurring the video clip.
I used:
title with white (it is 100% white) shape and blur effect above
video clip with track matte effect and matte alpha on the title track, reversed (blur effect on whole clip like in the tutorial)
Rendering and export does not change anything.
I'm feeling a bit stupid.

I deleted my SYNC Key and now realilze I want it. How do I reinstall it. The Sync Key under options does not work

I deleted the Sync Key, I thought it was just a refresh button and was not working. I have now read more about it, and want ot reinstall it, but when I go from tools>options.Sync, I get:
Incorrect account name or password: Update, reset or unlink
I have tried all three.
I know I made the error, but I don't know how to retrieve it. I have not shut my computer down, but I can;t seem to find it in my history either.
HELP ME PLEASE

User account – restore missing admin

WIN10 TP Build 10041 ask P.Key, and it does not work

Insider program, downloaded, installing in a VM Box, it starts, ask for the product key...
I try this one: NKJFK-GPHP7-G8C3J-P6JXR-HQRJR
and It says It's not able to verifiy, all is stopped... How can I go on?
Does it need a network connection ? (But I think it should be on, in the VM I've set it up)
Thank you
P.S It's in Italian, does it matter?
P.S. 2 No, English (USA) has the same issue

There are 2 keys, one each for the Pro and Enterprise versions. You could instead try:
PBHCJ-Q2NYD-2PX34-T2TD6-233PK
I've done, it didn't worked either

Virual Key figure exit does not work

Hi,
Detail - We are trying to build a logic for a virtual key figure.
We have created a VKF (Virtual key figure) and added that in cube and respective multi-provider.
We also added that VKF into the query .
Now we are using following approach and it doesnot work -
Approach 1 -
We created BADi called ZBIVAR_IMP based on RSR_OLAP_BADI using SE19 transaction. In this definition , we included our class - ZCL_IM_BIVAR_IMP
We activated this BADi definition and then in our Z Class - we have 3 methods, define, initialize and compute. We activated break-point .
We wrote a code there and followed sample code of CL_EXM_IM_RSR_OLAP_BADI class.
Now when we try to excute our query from RSRT, system doesnot stop at our break-point. In another words, this BADi is not getting called.
We also observed following settings if that matters --
1) When we go to RSRT for the query name and click on option, "No paraller processing" is on.
2) When we go to RSRT and click on technical info, we see "Virtual key Figure" property is set to NO. If this needs to be changed then how do we do that?
3) We activated BADi definition but not sure if we need to activate BADi implementation , if yes then how?
Approach 2 -
We develop code in one of the BEx user exit called EXIT_SAPMRSRU_001
In this exit , we have include called INCLUDE ZXRSRU02 .
We donot have any other includes such as ZXRSRZZZ or ZXRSRTOP. To be frank , we donot know how to use these includes and where are those available to be used?
Problem of this approach is we cannot use C_S_DATA that gets final logic of key figure to be used in BEx report.
Both of these approaches doesnot work..
Your help in this regard will be highly appreciated.
Thanks,
Raj.

Hi BI technical folks..
I also have simillar issue at my place. Can someone help?
Thanks
A

TouchPad lock key does not work anymore on Dell XPS L401X

Hi everyone,
On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
Any hint to fix this problem?
Many thanks!
Tinh

Try mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
I'm sorry i can't help more.

QuickTime 7 Pro Key Does Not Work

Apple Store sent me a QT Pro "key" and link to on-line instructions. Nothing works. My System Preferences QuickTime dialog/panel does not have an OK button (or a Register button). It's a dead-end dialog. Email reply to my plea for help from Apple Support said I cannot use the QT 7 Pro key on a Mac with OS X 10.3.9 and QuickTime 7.0.3. Said to reinstall 7.0.1 (downgrading from 7.0.3), which I have done, to no avail. Next, I'm supposed to reinstall QuickTime 6.... MEANWHILE, on an Apple QuickTime Web page, it says that QuickTime 7 Pro REQUIRES QuickTime 7. The Apple Support email also suggested that I cannot use QT 7 Pro unless I have OS X Tiger. The email seems fat fetched, but the on-line info doesn't help either. What do I have to do to get QuickTime 7 Pro running? I've paid in full for the privilege. Thanks.

I appreciate your taking time to reply. Unfortunately, the circumstance you describe does not work on my system, and no one can tell me why or what to do to fix it. Before I went to the Apple online store to buy QuickTime Pro, I already had QT 7.0.3 on my Mac OS X, 10.3.9, system. I paid for QT 7 Pro and got the "key"/registration email from Apple. The email included a link to online installation instructions which do, in fact, tell me to click OK in the System Preferences QuickTime panel (though there is no OK button). I tried again, using your advice, and simply quit System Preferences. Still no QT Pro. When I do a find, Sherlock returns 71 items whose names contain "quicktime." Only one is an application, QuickTime Player v. 7.0.1, No QuickTime Pro. [FYI, though I had QT 7.0.3 on my Mac, the Apple support email told me to "reinstall" 7.0.1, which I did. They actually wanted me to reinstall/downgrade to QuickTime version 6, but I have not done that.] My reason for wanting QuickTime Pro to work is so I can convert AIFF audio files to MP3 audio files. QuickTime Player won't do it for me and told me to get Pro. Thanks, --CSZ

One USB port does not work with external Disk or USB key

Hello,
Back to my iMAC there is 3 USB port. The second one - in the middle - does not work pluging an external Disk, an USB key or an iPOD nano. However it works well connecting a Wacom tablet.
Is there an explanation to this behaviour ?
More the keyboard is plugded on USB port 1 and the mouse on the keyboard. Time to time - especially at reboot - I have to unplugged the mouse and plugged again it in order it works.
In advance thank you for your answers
Regards

Since it does not work for three different devices, I will assume it is not something simple like a faulty USB cable. Since it does work for one device, I will also assume that the port is (at least partially) working.
As a test to narrow down the cause, I would try restarting from your Mac OS X installation disc (insert disc and restart with the C key held down).
At the first Installer screen (after language selection), go up the menu bar. Under Utilities, select to run Disk Utility. Now, connect the USB drive into that center port. Does it appear in the Disk Utility sidebar?
Please post back the result...

TS1381 My left arrow does not work on my macbook pro(model A1226). I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work) - HELP!!

My left arrow does not work on my macbook pro(model A1226).
I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow).
In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work.
I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
Here is the kicker! In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
Can anyone think of any other rabbit holes I can search?
thanks and regards
vats3

I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

HT2375 key rig 49 does not work?

Similar Messages

Maybe you are looking for