HT2426 Can't see my hard drive on my AirPort Extreme

I'm trying to set up a external HD as a share drive for the first time by connecting it to my Airport Extreme.  I can't see my hard disk where it is supppose to show up in Finder under Shared. There's nothing.  No Shared, no external HD. Anybody know why?  The HD is good, it works when I connect it directly to my imac.  Thanks

I'm currently having the same problem.
For a very long time, I've been using my Extreme with a 2TB external WD drive with seperate power supply.
Today I installed two old 2.5" drives ind a RAID1 enclosure, which I want to use for even more redundant back ups (NOT for speed).
But somehow my Extreme fail to see the attached drive.
I've tried ways of powering up and connecting in different stages, but nothing works.
When I unplug the enclosure from the Extreme and connect it directly to my Macbook, there seems to be nothing wrong. Drive shows up and everything seems to be working.
Anybody got a clue?

Similar Messages

  • XP sp3 cannot see usb hard drive connected to airport extreme 802.11n

    I have a sata drive that the airport utility recognizes. I attempted to follow the instructions from post HT1331 but no luck yet. I also reformatted the drive from ntfs to fat32 using vista but with the same result.
    I found another post while writing this one which solved my problem. It turns out how I formatted the drive wasn't usable by AEBS.
    Connecting Large USB Hard Drives to Airport Extreme
    I needed to format the drive using the instructions found below.
    http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
    After doing this and plugging in the drive I was able to use the drive intended. Since I had started the post I figured I would list the solution.
    Cheers!

    I don't think two problem are related. Now, for PC, try to disable the firewall software if you ave one. Some firewall can block it, like for ex PC Tools firewall, or ZonaAlarm. Some of them you can configure to work with disk agent.

  • I can't see hard drive attached to Airport extreme from Windows XP computer

    I have a Windows XP computer on my network. I can no longer see the network hard drive attached to Airport Extreme from the XP computer. I can see it with all the MACs on my network and all the Windows 7 computers. I can connect to the internet with the Windows XP computer. I previously had no problem seeing the network hard drive attached to the airport extreme from the XP computer and one day it just disappeared. I have deleted and reinstalled Bonjour, not just Bonjour print services. I can print to a network printer that is not attached to the Airport Extreme. Help!

    Well, I'm stumped. I spent an hour on the phone with Apple support-- they ran through the scenarios I had already been through, and they came up with nothing useful. I ended up taking a second 160gb HD that was formatted NTFS, and formatted if for HFS+. This drive was visible through Finder. I took the same drive, formatted it for FAT32 and, surprise, surprise, NOTHING VISIBLE.
    The "just works" philosophy is OK, but it's bunk when it comes to network drive support. I'm doubting the wisdom of this purchase now.
    $2500 for a computer that can't connect to a network drive that can be seen by an $500 Dell laptop?
    The issue simply seems to be this: put a FAT32 drive on another box, and it can be shared by Macs and Windows boxes.
    Put that same FAT32 box on an AirPort Express, and my Mac is BLIND. It can't see the drive.

  • Can I share my external hard drive over the Airport Extreme via the internet to someone in a different city?

    Can I share my external hard drive over the Airport Extreme via the internet to someone in a different city?

    Yes. Please see the following AirPort User Tip for details on several methods to do so.

  • I have linked my seagate hard drive to my airport extreme but can not seem to find it in finder any ideas

    Hi Help Please
    i have just linked an external hard drive to my airport extreme but it does not seem to appear in finder under shared !!!! any ideas

    i have plugged the hard drive into a usb router which in turn is plugged to to the AEBS it is visible in airport utility but then can not find it anywhere else!!
    First, the drive must be formatted correctly to work at the USB port of the AEBS. That means a format of Mac OS Extended (Journaled) or FAT32. NTFS will not work.
    You need to have a powered USB hub, even if the hard drive has its own power supply
    Next, you may not have configured the Finder Preferences to display a connected hard drive. Please follow these steps:
    o Click anywhere on the open desktop so that the Finder menus appear at the top of the screen
    o Click Finder, then click Preferences
    o Click the General tab
    o Under the heading of "Show these itmes on the desktop", make sure you have a check mark next to Connected Servers
    Restart both the AirPort Extreme and your Mac
    Open Finder and check under the SHARED heading for your AirPort Extreme icon
    Click on your AirPort Extreme and a folder will appear in the window to the right representing your hard drive
    Double click the folder to mount the drive on the desktop
    Hopefully, you are not planning to try to backup files using the Time Machine application, as this is not supported by Apple.

  • After connecting the Hard Drive to the airport extreme, where can I find the file location in Windows 7

    After connecting the Hard Drive to the airport extreme, where can I find the File Location (to access my files from my Hard drive)

    Hi,
    Try this select to check backup history:
    Select 
    r1.database_name, 
    r1.name, 
    (case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType, 
    r3.physical_device_name, 
    r1.backup_start_date, 
    r1.backup_finish_date, 
    r1.backup_size, 
    r1.compressed_backup_size, 
    r2.is_compressed,
    r1.server_name, 
    r1.first_lsn, 
    r1.last_lsn 
    from msdb.dbo.backupset r1 
    inner join [msdb].[dbo].[backupmediaset] r2
    on r1.media_set_id = r2.media_set_id
    inner join [msdb].[dbo].[backupmediafamily] r3
    on r1.media_set_id = r3.media_set_id

  • Using an external hard drive with an airport extreme and HP computer

    - I recently bought the airport extreme, and also bought a Seagate external hard drive for my music files.  I can see the hard drive on the airport utility but cannot access it or find where to access it.  I am using an HP computer with windows 7.
    Help please!

    The AirPort Extreme cannot share out the attached Seagate USB hard drive if it is formatted in NTFS or ExFat. Please check to see that it is formatted in either FAT32 or HFS+ (Apple format).
    If it is already formatted in either of the latter two formats, then verify that the AirPort Utility can properly identify the hard drive by using the AirPort Utility for Windows.
    Finally please checkout the following Apple Support article for details on accessing this shared drive from a Windows PC.

  • Will a WD hard drive work with AirPort Extreme to connect with an iPad Air

    Will a WD hard drive work with Airport Extreme to connect by a iPad Air

    If you already have an AE and a WD drive .. the best idea is plug it in and see on a mac in airport utility is the drive recognised.
    If not you have problems.. if it is formatted correctly (Not NTFS mainly) then it can be a drive that is not compatible.
    assuming it works get your ipad and pay for filebrowser or at least download a test copy and see how it goes.
    Always the best way to find out.. try it.

  • Using Time Machine w/external hard drive connected to airport extreme

    I hooked up an external hard drive on my airport extreme. I see it in sharing, however, Time Machine doesn't recognize it as a back-up drive unless I have it directly connected to my MacBook Pro. How do I get Time Machine to recognize the external drive when it's connected to the airport?

    FWIW, the AEBS has known problems sharing a directly connected HD. Take a look over in the AEBS forums, and you'll see that this is a very common problem. Perhaps Apple will update the firmware and rectify this problem.
    Cheers,
    Andreas

  • HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

    Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?  It worked very well.

    Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
    Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
    Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
    Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
    See the topic about Time Machine support for USB disks in this Apple Support document:
    http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

  • Time Machine doesnt see my USB drive, connected to Airport extreme =(

    Hello,
    I've been trying to figure this one out for almost 3 weeks now, but with no luck. I have a usb hard drive, connected to airport extreme. I've clicked on "setup time machine", select "choose disk", there is no disk to select. So I click on the "set up time capsule, it takes me to airport utility. I then click on the "disk" button and file sharing is enabled.
    I can mount the disk through the finder, just fine and able to transfer files back and forth, however time machine cant seem to pick up the drive. Would love to be able to use time machine to do backups, So can someone please help?
    osx 10.5.5 with airport utility 5.3.2
    Thanks in advance!

    Well this has worked for me. I have a Freecom 500Gb usb hard Drive connected through an unpowered 4-way USBhub to an Airport Extreme Base station. After mounting the Air Disk hard drive on my powerbook, I then dragged the disk to my user folder, thereby creating an alias. I have put that alias in my login items and now TimeMachine works beautifully. I've repeated it on a Mac Mini (also using OSX 10.5.5) and that seems to be fine too. Admittedly the back-ups take a long time over airport, but fine via Ethernet.
    Good luck everyone who struggles with this.
    David

  • How do I access external hard drive connected to AirPort Extreme via iPad

    Hello,
    How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
    I donot have a Mac and I use windows laptop.

    For your iPad, you will need an app, like FileBrowser, to access the external drive.
    For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

  • I have installed an external hard drive on my AirPort Extreme.  How do I access it and tranfer photos and file to it from my Mac.

    I have installed an external hard drive to my AirPort Extreme but cannot figure out how to transfer file/ photos, etc from my Mac, iPad or other IOS devices or to the hard drive.  Any help?

    From the Finder, go to the Go menu and select Network.

  • Can't see external hard drive after error code -36

    Hi, was copying iphoto data from an WD My Passport 750GB external hard drive to my MACBook when the system said it could not complete the copy as it had encountered a problem and indicated error code -36.  Now I can't see the external drive (or any data) on any computer.  I have tried 3 different MACs to no avail.  The drive makes a soft beeping noise but then stops but the light stays on.
    Any ideas on how I can get access to my data??

    Make sure the cable is securely seated on the device side.
    If that's not the problem, then either the drive mechanism or the enclosure has failed. If you don't have backups, you'd better hope it's the latter. Remove the mechanism from the enclosure and install it another enclosure. You can buy fairly inexpensive USB docks that a SATA drive drops into with no need for disassembly.
    Failing that, your only chance is to send the drive to a recovery service such as Drive Savers. They disassemble the drive mechanism in a clean room and mount the platters in another drive. Cost will be in the 4-5 figure range, and the results are uncertain.
    If you don't have backups, you don't have data.

  • Can't share files on a removable hard drive when using Airport Extreme

    I connected a removable hard drive to the USB port on the Airport Extreme. I can see the hard drive under Disks in Airport Utility, but cannot view or share the files.
    Note: I can share the files when I am connected directly to my MacBook Pro USB port.
    Please help.

    I have enabled file sharing.
    I tried going to afp://10.0.1.1 but get a connection error. I may be doing it wrong. How do I get the proper IP to use?
    Thanks

Maybe you are looking for

  • Macbook Pro (Late 2008) - Windows 7 64-bit, Bootcamp 3.1 - Wireless Issue

    Hi Everyone, I have a Macbook Pro (15-inch, Late 2008) model with Snow Leopard and Windows 7 64-bit dual boot. I have done a search and cannot find any reference to this problem on my hardware. I have had no issues in Windows 7 when using Bootcamp v3

  • Problem with smartform pages

    Hi; I have an Invoice that reach de maximun of lines in the first page (21 lines, that is the size of the Main window), but it shows a second page with all titles but with no records.. any help to solve this. David Fúnez

  • How do I determine build week in serial?

    I'm assuming that I have a week 13? The shipping info doesn't say if it's 10.5 or 10.6, will probably have to wait to boot up to see that. MBP 2.1 - 2Gb - 7200   Other OS  

  • Best way to export final movies in HD

    Hey guys, First post here. I have sony HD cam. Takes great 1080i video. I've imported into imovie 9 and 11 and when I export, I seem a bit disappointed in the quality. I'm not really editing it down with stabilization (which zooms and lowers quality)

  • Why do we need Applet support?

    In another thread, I'm trying to work out a problem deploying WebHelp because the file webhelp.jar in RH 7 WebHelp output cannot be unzipped (or un-jarred). This file is used for applet support, according to the RH help topic on output files, when yo