HT2458 How do i make my voicemail look kind of like my recent calls list?

Right now i have to Call my voice mail but my friend told me that you could make your voicemail a list like the recent calls list. Please help me i am super confused.

if your with an official US carrier what you are refering to is visual voicemail. 
Go to settings then general, then Cellular.
There turn cellular data off, then back on.
Now go to voicemail and add your voicemail password, now you should have visual voicemail.

Similar Messages

  • How do I make multiple movies look like one?

    I created a demo of 136 slides with mostly screencaps and one
    small flash animation. The final published flash file is
    approximately 30MB. When the demo is run on multiple computers, the
    CPU utilization rises up to almost 100%, this makes the demo run
    very slowly on most computers. I was advised to cut my captivate
    movie in half ( in slides)... however even then the CPU utilization
    is quite high. How can I break my demo into multiple linked movies
    (to bring down the file size) but still have it play smoothly
    without it stopping to load after each new movie? How do I make
    multiple movies look like one?
    Thank you.

    Would it work to make the navigation of the page go to the
    next movie?

  • How can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

    how can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

    That model MBP gives you a choice of cards to use – one at a time. it is not designed for them to run in tandem - splitting up the workload.
    Russ

  • How do you make multi cameras look the same?

    So I have three cameras used in the shoot. Lighting is from regular track lighting most commonly found in ware shouse type venues. Cameras 1 & 2 are one foot off the ground pointing ever so slightly up. Camera 3 is shooting from 15 feet off the ground pointing down. How do I make them all look the same in post production? When I try to increase the brightness in camera 3 it looks washed out. When I try to dim the brightness in 1 & two it looks dark and shadowy.

    Ideally you start with this:
    • 3 identical camcorders.
    • Manually set the white balance in each camcorder onsite before doing a shoot.
    • Make sure the 'program' setting is the same in each camcorder, e.g. they should all be "Auto" or "Spotlight" or "Portrait" etc. - the one you prefer.
    • If possible, manually set the exposure in each camera
    What probably happened is your camcorders' auto exposure did its job and the cams pointing upward were underexposed because the sensor was affected by the overhead lights.
    If your clips' brightness & contrast are reasonably close, start by applying the Color Corrector filter to each clip. Use the Visual control (you will see the button when you apply the filter) and then use the Eye Dropper tool to set the white & black points in each clip. If the cameras weren't too mismatched this may be enough to correct the brightness mismatch. I doubt you will get a perfect match but hopefully close enough that it's acceptable.

  • How do I make my old user account perform like the new one?

    I have a macbook pro 13" 2008 with 8 gb of ram that has been showing stuttering in hd video lately (or maybe when i upgraded to lion). I created another user and it doesn't seem to suffer any stuttering. Perhaps it doesn't have weird things running the background like the 655mb kernal task I see in activity monitor. My question is, how do I make my old user account perform like the new one? I've tried to turn off things running the background, but it doesn't seem to do anything. Thanks!

    How to Transfer Everything from an Old iPad to New iPad
    http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Wipe-Your-iPad-And-Erase-Data.htm
     Cheers, Tom

  • HT201436 how do you set up voicemail on the i5? People are calling me, it rings 4 times then a busy signal.  I recorded a VM, but what am I missing?

    How do you set up voicemail for an I5?  People are calling me, it rings 4 times, then they get a busy signal.

    This sounds like something on the carrier's end. Call them and see if they have your account provisioned for voicemail.

  • How can I delete the recent calls list in FaceTime?

    How can I delete the recent calls list in FaceTime of my Mac?

    Hello muchaim,
    After reviewing your post, it sounds like you want to delete the recent call list. I would recommend that you read this article, it may be able to help the issue.
    FaceTime for Mac (Yosemite): Make and receive FaceTime calls
    FaceTime keeps a list of the most recent calls you made, received, or declined, with the most recent call at the top. To return a call, click the Video button  or the Audio button . To remove a call, select it and press Delete.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name.  How can I restore the names to my recent calls list?

    I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name.  How can I restore the names to my recent calls list?

    Are the contact details in your contacts app, the phone app uses the contact app to put names against telephone numbers.

  • How to increase recent call list in i phone 5s

    how to increase recent call list in i phone 5s

    There are apps that can jeep Track of many more  calls. The iPhone native app is limited to 100.  Search for those apps in the App Store.

  • How do i edit numbers in the recent call list?

    I'm using iOS 5.0.1 on the 4s currently
    Can anyone tell me how to edit the contact numbers in the recent call list? Eg. I would need to add a certain prefix in front of the number to return an overseas call in my recent call list. I tried to copy n paste the number after adding the prefix manually via keypad, but this method erases the prefix. Is there any other way to do this besides saving a different number in my contact list?

    As it happens, I use my "Recent Applications" menu as a list of "favourite" apps more than as a way to access recent apps. I won't go into too many details of "why", but I do have the "Finder" in there.
    I am using "Panther" so I don't know if this still works, but try opening "/Applications" > "Utilities" > "Terminal.app" and entering this command:<pre>defaults write com.apple.recentitems apps -array-add '/System/Library/CoreServices/Finder.app'</pre>It may be necessary to log out and back in again for the change to take effect, or the change at least may only be active in apps launched after modification of the file. There may also be issues related to the number of items in the list - it may be necessary to increase the "Number of recent Applications" through "System Preferences", or else clearing the list before entering the above command.
    I also keep my "com.apple.recentitems.plist" file "locked" - this prevents items from being dropped through non-use. Despite being "locked", the menu does update during a login session so I still get some "recent item" functionality from the menu. Everything does of course revert to the saved state for the next login, however.
    Regarding the "Dock", in "Panther", after "hiding" the "Dock", it is relatively easy to "pause" or restart it, repectively, using:<pre>killall -STOP Dock
    killall -CONT Dock</pre>Perhaps these commands could be incorporated into an "AppleScript" application and added to "Recent Applications". However, you will also lose the use of ⌘-Tab application switching, Exposé, widgets, and the ability to minimize windows while the "Dock" is paused. Alternatively, there are a number of preference settings that can be applied to the Dock's ".plist" file to minimize its obtrusiveness without affecting other "Dock.app" functions. However, it will be more difficult to toggle between the two states than simply pausing the whole app...

  • How come 64 GB storage can hold only 100 entries in the call list. can anybody explain the reason?

    how come 64 GB storage can hold only 100 entries in the call list. can anybody explain the reason?

    Because the "Recents" is limited to exactly 100 calls, by design...nothing to do with the size of your phone. Tell Apple if you liked to see it increased:
    http://www.apple.com/feedback/iphone.html

  • How do I make my animation look the same in different browsers?

    Hi!
    When I play my animation in different browsers it don't look the same as in the preview. In IE some of the parts of the animation have disappeared and in Chrome the pats are no longer in their right places. See picture below. 
    How do I do to make the animations look the same in different browsers?
    (In the end I want to use the animations in my captivate 8 project. )
    BR,
    M

    Ah, found the issue, the problem is with the name of the two images,
         genomförande    (instead you can use genomforande)
         Grå bakgrund     (instead you can use grabakgrund)
    Seems like IE is having issue with those special characters.
    hth,
    Vivekuma

  • How do I make this button look better in GIF?

    I confess I am fairly new to Illustrator... but if you can point me in the right direction, it will be greatly appreciated.
    All I need to do is to create a GIF that looks as good as a SWF.  I have played with all the settings and I can't figure out how to do this!
    This is how bad it looks when I exported to GIF
    This is what I see in AI. Letters are much better defined.
    How do I make AI export a simple GIF and make it look great?
    Jose

    In the save for web and device in the image tab check anti alias.

  • How do I make a photo look good in a BW newspaper

    I nned to submit an ad to a newspaper it has a photo in it How do I make it look great?

    In PS, change the mode to grayscale.  I typically use the Auto Tone to create better black & white contrast, followed by using levels, for manual adjustments.  Ink spreads more on newsprint than regular paper, so I change the dot gain to 30% (see color settings).  You don't need high resolution for newsprint ... 150 ppi will suffice for b&w.

  • How do I make firefox 4 look more like firefox 3?

    I am considering updating the household computers to firefox 4, however, the older members of the household dont do changes with their computers very well, to that end, I wish to know how to make firefox 4 look like firefox 3.

    If you do not like the new appearance of Firefox 4 then you can change some setting to restore the Firefox 3 appearance.<br />
    You can right click the orange Firefox button to open the toolbar context menu or use (F10) View > Toolbars.
    * Click "Menu Bar" to place a check mark and make the Menu Bar visible all the time.
    * Click "Tabs on Top" to remove the check mark and place the Tab Bar at its original position just above the browser window.
    * https://support.mozilla.com/kb/why-are-tabs-top
    You can use this extension to get the Status Bar back:
    * Status-4-Evar: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
    More tips here:
    * http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/

Maybe you are looking for

  • Cannot create iSCSI connection to HP4300 SAN [OVM3.1.1]

    I have set up OVM 3.1.1 on oracle 11g SE. I have on OVS with three bonded networks...One for Management, Storage, and the third for VM vlan networks. Now I need to set up some storage. My SAN is an HP P4300. I found that the initiator for my OVS is O

  • How to change "Save As" view

    I have 2 machines with Adobe reader 8.  When I do a save as they both open up with a view of List.  One PC is sorted by Date and the other by Name.  Can I change the view it starts at to default to detail?  and more important can I have it always sor

  • How to select variable filename from local directory with fn to load xml

    I would like to select a specific xml file to load from a local directory. The file name is composed of "Title" + "number sequence".  I know the Title (in this case its XLink07), but I need to select the latest number sequence or the latest by date s

  • How to render loop region only in Adobe Premiere Elements 10

    I've been editing DV NTSC (29.97 frames/sec) video in Premiere Elements which is only 1:42 long. But every time I render it, it mysteriously becomes 2:57 minutes long. The extra minute's showing just a black screen and nothing else. I've been told th

  • Sharing a Catalog's History between volume Folders?

    Setup: I have been working on my images 'Volume A' in the past. I have just mounted a pair of 1.5Tb drives inside my (MacPro) workstation and now have the same series of images, from 'Volume A', on one of the new internal drives. One of the new drive