HT2463 Air Play icon disappears after a few seconds of opening ports in router settings.

The AIr Play icon no longer consistently appears on my iMac or my iPad.  Apple TV is 3rd gen, iPad is 4th gen, iMac is latest (2012) router being used is Linksys (Cisco) E3000.  Opened TCP ports 123, 3689, and UDP 5353, and after saving the router settings, the Air Play icon appeared on iPad but disappeared again after less than a minute.  The Air Play also appeared on my iMac and when I clicked the rainbow wheel appeared and after less than a minte the Air Play icon vanished again.  I have performed restores of the AppleTV both by using the iMac with a micro USB  and also did a restore while connected to the television.  Any other suggestions before I take it into the local Apple store?  Thanks.

I set an appointment at local Apple store Genius bar.  The tech helped walk through and eliminate possible variables until we agreed it must be a problem with my router.  BTW, the tech hooked up my Apple TV at the store and it worked perfectly using the Apple store network.  I went home and restored my router to the factory default (like out of the box when it was new) and re-set it up.  When I finished my Apple TV has been displaying the AirPlay icon flawlessly.  Hopeful it will continue, but resetting one's router to factory defaults may fix your problem if you are expeiencing same issue when the AirPlay icon goes missing.

Similar Messages

  • Sound disappears after a few seconds of playing

    Hello!
    Sound from speaker disappears after a few seconds of playing on my x201i.
    But in headphones all is ok.
    OS: Win7.
    I have performed all recomendations from "Troubleshooting audio issues - ThinkPad" but problem still exist.
    Can anybody help me?
    Thanks!

    So here are some screen shots.  The first one, I have my text block selected - you can see both fill and outline are set to "none".  In the second one, I'm typing - you can see the text and the text is set to a white fill.  In the 3rd one all iv'e done is stopped typing - the cursor is in the same place and the text disappears.  It won't re-appear unless I click in it and make edits again, then 3 seconds after stopping, it will disappear again.  I'm sure this is either a glitch, or a really simple thing that I'm missing because I'm new to InDesign.  Thanks so much for your help.  I really appreciate it.

  • After putting an entry into the calendar it disappears after a few seconds

    Calendar entries disappear after a few second and do not sync between iPad and iPhone.

    Hi,
    Go to c: program files*86:common: adobe: sl cache, rename the sl cache
    Go to c: program data: adobe: sl store: rename the sl store to old sl store.
    Right click on premiere pro and run as admin.
    Thank You
    Arjun

  • Ipod shuffle stops playing the song after a few seconds

    My Ipod shuffle stops playing the song after a few seconds, i can skip to the next song but it happens again for every song..
    the thing is its random, sometimes 5secs or 10 secs or at the most a whole minute
    i have updated, restored, reinstalled an all that but i really dont want to send it back as im in afghanistan and would be weeks before i see it again an i use eveyday!! for running.. i thought maybe sweat had got inside it, its not the headphones i have already tried swapping them.
    please help out a soldier in need?

    mine is doing the same thing; I have updated it, and restored the factory settings, and it still isn't working. I use mine for running as well; I think it has something to do with the sweat. Hopefully someone posts with a fix.

  • When I power up my mac, I see the white screen and the apple icon. After a few seconds of powering up the screen goes dark. Yet I still can the mouse arrow but nothing else.

    When I power up my Imac, I see the white screen and the apple icon. After a few seconds the screen goes dark. I am able to still see the mouse arrow as I move it around. But nothing else. What is the problem and how do I recover?

    Try this from another user:
    1. Shut the computer down by holding the power button for 10 seconds
    2. Restart the computer and press shift at the same time until you see the progress bar start moving
    3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
    4. After a moment, you should see the spinning beach ball
    5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).

  • Rollover Sidelet disappears after a few seconds even when the mouse hasn't left the "hit area."

    Rollover Sidelet disappears after a few seconds even when the mouse hasn't left the "hit area." There is enough text in the sidelet that the user cant read it all before it disappears on its own. Then they have to move their mouse off the hit area and back on it to see it for another 5 seconds. How do I fix this?

    You should tell which version you are using. If you are on CP7 or earlier, look in the Properties panel of the slidelet, not the slidelet area (that is the rollover area, blue rectangle): change time in Timing accordion.
    If you are on CP8, for the same object (slidelet)  change its time in the Timing panel that is now no longer in the Properties panel.

  • My nano is fully charged and when I use the earphones it comes with, the nano stops playing my music after a few seconds and turns off.  But when I use another earphone, it's okay and stays on. How do I keep the nano from turning off after a few seconds?

    Why does my nano keep turning off after a few seconds while I'm listening to my music?  It's fully charged and brand new.

    I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
    My computer meets the requirements.
    All software (Windows, iTunes and QuickTime) are up to date.
    As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
    My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
    As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
    As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
    'Readyboost' was already set at 'Do not use'.
    No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
    The problem still exists. Please help.

  • I somehow set my toolbar to disappear after a few seconds, making the screen jump, very annoying, how do I set it back so it stays visible all of the time?

    I can't remember where I found the option to make the toolbar invisible until I moved my cursor to where the toolbar usually shows. If I move the cursor again, after a few seconds the toolbar disappears causing the screen to jump up and fill in the space where it was. It is so irritating and I can't find out how to make it visible all of the time.

    You can try to check the '''Options''' for the different '''Extensions''' in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Starting Firefox temporarily in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode] may also help determine if an installed add-on is causing the change.

  • Acrobat 8 Disappears after a few seconds

    Hi Guys
    I do not use PDF's to the point I need to upgrade so having Acrobat 8 is good enough for me, but all of a sudden if disappeers after a few seocnds on opening.
    I have lloked at uggestion via Google but none have helped.
    If this si a known bug in 8 that adobe is aware of, is there not a fix for it, I need it to be simple as I am a simple person, not a techy...!
    Kind regards to all
    KM

    What is your OS (Operating System) and update level?
    Have you installed all of the Acrobat 8 updates?
    All Adobe updates start here and select product, install in number order, updates are not cumulative http://www.adobe.com/downloads/updates/

  • When on some website pages, the page disappears after a few seconds and a blank screen appears.

    When clicking on a link in some web pages (AARP in this case), the web page loads in a separate tab, and after a few seconds the page is replaced by a blank page and the word "done" appears on the second from the bottom bar on the screen.
    I have updated Windows XP as of 9/15/10 and Firefox to version 3.5.12, but the problem persists.

    When I turn on my ipod or I plug it in the apple logo appears for a few seconds and then the screen flashes white, soon after the "use itunes to restore" message appears but when I plug it in to my laptop the device isn't recognised on itunes

  • My Air Play icon disappeared in iTunes.  How to get back?

    Air Play was working fine for months/years.  Suddenly there is no icon or any way to connect to wireless devices.  Thoughts on how to fix?

    Hello ggapplehelp,
    Thanks for using Apple Support Communities.
    If the AirPlay icon is missing from iTunes, then I'd like you to please follow the information outlined below.
    If the AirPlay icon doesn’t appear in iTunes
    Ensure that you followed these steps to use AirPlay in iTunes.
    If the AirPlay icon  still doesn't appear, try one of the following steps:
    If you want to AirPlay to an Apple TV, ensure that AirPlay is enabled on the Apple TV.  From the Apple TV main menu, go to Settings > AirPlay. This should be set to On.
    If you want to AirPlay to an Airport Express, ensure that AirPlay is enabled in the device settings.
    If you want to AirPlay to a 3rd party AirPlay-enabled device, refer to the user guide.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Have a good one,
    Alex H.

  • HT204291 why does my air play icon disappear sometimes when i watching my movies

    Why does my airPlay icon disappear sometimes when I am watching a movie?

    Intermittant issues are usually a result of interference. Check istumbler.net

  • Web page loads and then disappears after a few seconds

    I have been visiting the More magazine website (www.moremagazine.co.uk ) for some time. However in the last week or so when I click on a link in the e mail I get from them the page loads as usual, stays for a few seconds and then disappears - only a blank page remains.. Even if I refresh I still get a blank page. If I type the URL in manually I just get a blank page immediately.

    Anyone solve this yet?

  • HT201335 Air Play Icon Disappeared

    For some reason my ability to mirror my movie from my computer to the tv no longer works.  The airplay icon has disappeared and I am not able to get it to come back up.  Has anyone have any experience with this and how I can get it to work again?

    Hello SoDak281
    Check out the articles below to troubleshoot AirPlay. I have provided one for an iOS device as well as one for Mac.
    iOS: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/ht5404
    Regards,
    -Norm G.

  • Outlook 2013: Imported or copied items from .pst file disappear after a few seconds

    I am migrating from an open source email platform (Axigen) to Outlook/Exchange 2013. The Axigen system uses a connector for Outlook allowing users to use Outlook as a client.
    To move from Outlook 2010 with the Axigen server to Outlook 2013 with Exchange I have exported the entire mailbox from Outlook 2010 to a .pst file which I am then trying to import into Outlook 2013.
    The import process appears to complete successfully and the imported items show up in Outlook 2013 - but only for a second or two. Then they disappear completely, nowhere to be found. This happens with  ontacts, emails and calendar items and the result
    is the same whether I import the entire mailbox or just a folder at a time.
    If I OPEN the .pst file into Outlook 2013 everything in it looks perfectly OK, I can view items with no problems, all folders are there with their correct content. Now if I try to move or copy
    items from the opened .pst file into the Outlook 2013 mailbox, I get the exact same symptoms as when importing. Items show for a couple of seconds and then disappear. If I copy or move a
    folder, the folder remains in the Outlook 2013 folder tree but the items in it disappear.
    Why would items be perfectly visible and readable from an opened .pst file but disappear when they are copied into the new 2013 mailbox?
    They are not visible in OWA either, btw, so this is not just Outlook not displaying them, they are really gone. Checking the folder size in Outlook shows an empty folder (size 0, 0 messages). I have tried the /cleanviews switch when starting Outlook.
    This has me completely stumped. Any ideas?
    Thanks in advance!

    More strangeness:
    I set up an Android phone to sync with this account just now. I imported my contacts list from the phone into the Exchange account. After sync, all the contacts are perfectly visible on the phone, but NOT in Outlook 2013 or in OWA...
    So maybe it is some sort of display filter thing after all? 
    That's unbelieveable that message is visiable in Android phone through Exchange ActiveSync but cannot be viewd in OWA...
    For the database session, we may enable
    Exchange Mailbox Audit logging(http://technet.microsoft.com/en-us/library/ff461937(v=exchg.150).aspx) to check if the message is indeed upload into DB from Outlook.
    For the client level, please enable Outlook logging to log what happens inside outlook to aid in your troubleshooting.
    We can enable Outlook logging in Outlook 2013 under File > Options > Advanced > "Other" section
    Log files are created as .etl files and stored in %userprofile%\Local Settings\Temp.  A new log file is created each time Outlook starts.
    Cheers,
    Tony Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please contact
    [email protected].
    Okay, I have enabled Outlook logging. However I cannot find any way to read those .etl files.
    I also enabled audit logging in Exchange but as I understand it that will not log operations performed by the mailbox owner, only non-owner access. 
    I think I am close to giving up on this. I can't believe an enterprise email platform will simply delete messages copied into a mailbox without any error message whatsoever, and no way for an admin to track what is happening.
    It is definitely happening when syncing with Exchange, so there must be something in these items (and
    remember this happens not only to email messages, but also to Contacts) that makes the Exchange server decide these messages should be discarded witout warning.
    One other thing: Folders copied from the .pst are visible on Outlook (although their contents are deleted) but not on ActiveSync clients. If I create a new folder in the mailbox, it syncs as it should.

Maybe you are looking for

  • [CS5] Overriding elements from master of master

    I have two masters, A-product and B-product 1. Master B-product 1 is based on A-product. 'myPage" based on B-product 1. Overriding elements from B-product 1 to document page works, but I can't override elements from A-product master. I can found elem

  • PSE 7: How do I turn off the automatic text insertion on photos in slide show

    When I create a slide show, PSE 7 creates text on each slide that states my cameras name: "SAMSUNG DIGITAL CAMERA" How do I turn-off this feature?  

  • Action vs ActionListener

    I am curious if there are any best practices for using the action property vs the actionlistener property to execute some managed bean code when clicking on a button? Should you only use the actionlistener if you need to do something with the action

  • How to reduce document for court filing?

    I am filing in Colorado.  The courts won't accept anything  over 5.1.  How do I reduce my documlent?

  • Outlook clients get prompt for credentials

    I have get the following strange problem that when the Exchange server restart and get back on-line my outlook clients all get prompt to enter their credentials. If they open and close Outlook it works until there is a lost in communication between O