HT2477 how can i macht my new imac with the macbook pro????

I HAVE A NEW IMAC BUT WHEN A START IT THE FIRST TIME I DID NOT MACHT IT WITH MY OTHER MACBOOK PRO AND IPAD, HOW CAN I DO IT NOW?

Csound1 wrote:
Sorry, don't know what happened there you can boot to Recovery but you can't access DW, but you can make  boot disk on a USB drive (use DiskmakerX) and that will allow you to access DW (which does nothing useful on a new machine) Diskmaker X works with 10.7 to 10.9
Thanks, I'll give that a try. The only thing I have to use as a thumb drive is an old iPod that's only a half a gig in size. I hope that's big enough!

Similar Messages

  • How can I startup my new iMac with the Diskwarrior DVD

    I just bought a 27" iMac and I'm trying to figure out how to start this fantastic machine from my Diskwarrior DVD. It's less than a month old, has 32 GB of ram, and of course it 's running OS X 10.9.4. My old iMac was from 2008 and it had no problem starting up on this DVD. Oh, and the copy of Diskwarrior I'm using is 4.4.
    Thanks!

    Csound1 wrote:
    Sorry, don't know what happened there you can boot to Recovery but you can't access DW, but you can make  boot disk on a USB drive (use DiskmakerX) and that will allow you to access DW (which does nothing useful on a new machine) Diskmaker X works with 10.7 to 10.9
    Thanks, I'll give that a try. The only thing I have to use as a thumb drive is an old iPod that's only a half a gig in size. I hope that's big enough!

  • I installed my new iMac with my Macbook Pro 2008 backup and created a network with the iMac and now the Macbook Pro cannot get internet.

    I installed my new iMac with my Macbook Pro 2008 back up.  I created a iMac network with Airport extreme, but now my Macbook Pro cannot get internet.  any ideas on why or what to do about it.

    Hello 1BillyMac,
    It seems you have a network conflict that isn't allowing your MacBook Pro to connect to the internet. This may be caused by both computers sharing identical network settings. You may want to consider creating a new network location on your MacBook Pro to assign new network settings. The following article will instruct you on how to do that:
    OS X Yosemite: Add a network location
    A network location is a group of network settings
    A network location is a group of network settings for your various network services (Ethernet or Wi-Fi for example).
    If you often change network settings, you may find switching between locations quicker and easier than repeatedly modifying individual groups of settings. 
    For example, you might want to make a location for “home,” where you connect to the Internet with a telephone modem, and a location for “office,” where you connect to your company network and the Internet using Ethernet or AirPort. 
    Choose Apple menu > System Preferences, then click Network.
    Click the Location pop-up menu, choose Edit Locations, then click Add . 
    Enter a name for the location, then click Done.
    Enter settings for each network connection service you want to use in that location.
    After you create your locations, you can switch all of your network settings by clicking the Location pop-up menu and choosing a different location.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • How can I download videos from youtube with may MacBook Pro? I cannot download with real player. So how can I do it?

    How can I download videos from youtube with may MacBook Pro? I cannot download with real player. So how can I do it?

    There are two apps that I know of - and I would also swear that they come from the same developer, although they've different names. Both have free trials and both cost $40 (but both do 'other' video conversion as well).
    One is WonderShare - I bought this one and it works very well for downloading YouTube videos as well as converting just about any file format you can think of.
    The other is iSkysoft Video Converter (just noticed that it's now $36).
    I tried them both and finally decided on WonderShare. Give them both a trial run and decide if you like either one enough to buy it. I don't know of any 'free' software that will allow you to download and convert YouTube videos, but perhaps someone else will come along and know of something...
    Good luck,
    Clinton

  • How can I open a new window with the same website like the one I have open?

    In safari I can open a new window with the same website like the one I have open, that makes it easy continuing to navigate on a website and to go back to the original website

    Hello Andieas
    Why open a new window for fast browsing??
    Open new tabs.
    Just right click on what you want to open and click "Open in new Tab"
    It is easy and doesn't consume memory from your computer as well as easy to navigate.
    Hope you'll like it

  • How can I use an A1082 monitor with my MacBook Pro?

    I received an apple A1082 monitor this past weekend from a friend and we couldn't, and still can't, figure out how it can be used with my MacBook Pro. I know that I need an adapter, but where does it get power from? Thanks in-advance. Richie.

    <http://support.apple.com/kb/HT2803>
    <http://www.ebay.com/bhp/apple-cinema-display-90w-power-adapter>

  • How can I create a new User with the Java API like OIDDAS do?

    Hello,
    I'm currently working on an BPEL based process. And i need to create an OCS user. So far I can create an user in the OID. But I cant find any documentation about given this user an email account,calendar and content function etc.
    Did anybody know if there are some OIDDAS Webservices? Or did anybody know how to do this using the Java APIs?

    You are asking about a Database User I hope.
    You can look into the Oracle 8i Documentation and find various privillages listed.
    In particular, you may find:
    Chapter 27 Privileges, Roles, and Security Policies
    an intresting chapter.
    You may want to do this with the various tools included with 8i - including the
    Oracle DBA Studio - expand the Security node and you can create USERS and ROLES.
    Or use SQL*Plus. To create a
    user / password named John / Smith, you would login to SQL*Plus as System/manager (or other) and type in:
    Create user John identified by Smith;
    Grant CONNECT to John;
    Grant SELECT ANY TABLE to John;
    commit;
    There is much more you can do
    depending on your needs.
    Please read the documentation.
    -John
    null

  • How can I use a USB keyboard with my Macbook Pro?

    My MBP will not recognize my brand new USB keyboard.
    I have tried the keyboard on two other Macbook Air's and it works perfectly.
    My MBP:
    OS X Yosemite
    10.10.1
    Macbook Pro (Retina, 13-inch, Late 2013)
    2.4 GHz Core i5
    8GB 1600 MHz DDR3
    Mac HD
    Graphics Intel Iris 1536 MB
    Thoughts on how I can resolve this issue would be greatly appreciated.
    Thanks,
    Greg

    Brenden,
    Thanks for the reply.
    I've gone your suggestions in detail and the keyboard is still not working.
    From what I can tell this is a known issue with Yosemite.
    https://discussions.apple.com/thread/5676379
    Someone at Apple must be able to figure this one out.
    Greg

  • How can i update my new iphone with the data from my old iphone?

    I recently bought an iphone 3GS after my iphone 4 was stolen but when i try to sync the new phone it says the software is out of date. (when i was telling the guy at the apple store about my phone being stolen he said when you get a new phone just sync it to retrieve all the information stored on there. Is there any way i can retrieve the stuff from my old phone? I would like my messages, notes and apps from my old phone on my new one.

    Just to make sure - You're saying you had backed up your iPhone 4. When you plug in the 3GS, and try to "restore" the data from the iPhone 4 backup onto the 3GS, you get that error? Check to see if the iOS version is up-to-date, and hopefully it isn't. It might also be because your iPhone 4 wasn't, and is causing some sort of problem.
    Good luck!

  • HT3775 How can I open an AVI Video with my MacBook Pro?? Do I need to do something special?

    I need to know how to convert these AVI videos to MP4!! Some please help!?

    You need a third-party tool like MPEG Streamclip or Aneesoft video converter for mac to convert avi to mp4.

  • How can I open my flash drive with my MacBook Pro? I can't find it on FINDER!

    My USB port can't open it!

    Do you have your Finder preferences set to show all devices:
    If so, and the USB flash drive is not showing up in the Finder, can you see it in Disk Utility (Applications>Utilities)?
    Clinton

  • How can i drive 2 external displays with my macbook pro?

    I just purchased an Macbook Pro and wanted to know if there is a solution to drive 2 external Apple
    Cinema Displays simultaeously.  (Set up so displays operate as 1)?

    I believe the TripleHead2GO requires all three external displays to be identical. Verify this with a call to Matrox. There is also a maximum resolution limit for the three displays together, which you'll want to be sure is acceptable to you and will look OK on your monitors. Ideally, the maximum resolution the TH2Go supports for each display will be the maximum resolution each display is capable of when used alone, because the displays will be sharpest at their maximum resolutions. If used at any lower resolution setting, they will be noticeably blurry.
    I'm not aware of any other three-display options for the Mac that enable the monitors to operate with normal responsiveness (USB video adapters are slow). Yes, the TH2Go is expensive, and that's probably because it's the only game in town.

  • How can I plug in two monitors in the MacBook Pro thunderbolt? Cheers

    HI,
    I would like to plug in two monitors in the Minidisplay port. And I need extended screens and not just a copy. Any solutions?
    Thanks for reading

    http://support.apple.com/kb/HT4885
    Stefan

  • Have a canon dc310 camcorder that uses mini dvd's. How can I get my new Imac to read these dvd's?Camcorder unable to connect to computer. Will a mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with a mac?

    I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer.  How can I get my new Imac to read these dvd's?  Will the mini dvd adapter work or do I need to purchase an external dvd rom device?  Which device works well with the Mac?  Do I need anything else to get the dvd material onto my mac?  Thanks!!

    No DV port in camcorder.  Just a yellow AV port/hole.  I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's.  Can I use this with a Mac?  Could I connect a dvd player to the Canopus and transfer the disks onto my Mac?  Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way?  Thanks again!

  • How can I move my iPhoto Library from my MacBook Pro to my iMac or hard drive??

    How can I move my iPhoto Library from my MacBook Pro to my iMac or to my external hard drive? 'Help' is not helping!!

    To move to another machine:
    To move an iPhoto Library to a new machine:
    Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
    But however you do choose to link the two machines...
    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then launch iPhoto. That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.
    To move to an external disk:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

Maybe you are looking for

  • Why is there still no grid view in iTunes 11?

    I am pretty tired of seeing message boards about it and no replies from Apple itself, since everyone seems p. upset about it

  • Tax Calculation on Base amount in FB60

    Dear All, My client wants to calculate tax on base amount in FB60, he receives invoice from vendor with 6 items(i.e., 6 different types of expenses gl) and in that invoice he get the total tax amount not individual tax amount, here is the example : i

  • Duplicate Contact/Address Book entries on iPhone

    why do I have duplicate contact and address books entries on my iPhone? I never had this problem until I upgraded to iCloud. I have an iPhone 4 and it is upgraded to the current OS.

  • Travel Management Attachment

    Hi! I need to manage attachments in webdynpro for travel management, does anyone know a (or more) bapi i could use to attach, remove or add a file to a expense? there's a function in R3's trip transaction and that's what i want to emulate. thanks a l

  • Newly created InDesign 5.5 file missing plug-ins, can't open now

    How can I open an InDesign 5.5 file that says it's missing plug ins and won't open, when I just opened and created the file last week?