HT2478 Suddenly my screen went large, unable to access right of screen

My screen went too large, unable to access left of screen

You're in the Tiger forum. Next time you can go here. For now, try holding down Cmd or Option (alt) and scrolling down with the mouse.
Also Cmd-Option - (hyphen key) or the + key to zoom in.
Also, System Preferences>Universal Access>Seeing. Turn off zoom.

Similar Messages

  • I was holding my i phone in my hand for a while and suddenly the screen is very large...what do i do??? how do i reboot???

    I was holding my iphone in my hand for a while and suddenly the screen is gi-normous...what do I do??? how do I reboot???

    to reboot you hold the power on/off button and the large home button together until you see the little apple logo.
    However if you take three fingers together you can tap the screen back to its former size.
    See article below.
    My iPhone Icons Are Large. What's Happening?
    Good Luck

  • Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the the on and menu button to reboot it and so it shut of and came back on and been on the loading screen for an hour. What can I do to fix it?

    Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the on/off button and menu button to reboot it. So it turned off then back on but it has been stuck on the loading page for an hour. What's wrong with it?

    - Let the battery fully drain. After charging for at least an hour try here:
    iOS: Not responding or does not turn on

  • Ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

    ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My MacBook was working completely fine , I've had no troubles with it. I was waitin for something to load and all of the sudden the screen just went black . I've restarted it several times and the screen has just stopped working .

    My MacBook pro has been working fine but all of the sudden the screen went Fluro green. I restarted the computer by holding the start button down and evert since , every time I turn it on the screen is black . I've restarted it several times and the screen doesn't change.

    Shanice4 wrote:
    Im not sure what that means ?
    What part of the Article that I linked you do not understand?

  • HT1657 i was watching a tv show and suddenly the screen went green what can i do

    i was watching a tv show on itunes and suddenly the screen went green ,what can i do

    & its not because of apps or anything i think something's wrong with the screen!?!?

  • Why all of a sudden is my display larger than my screen?

    All of a sudden the display is larger than the screen.  I have gone into System Preferences and Universal Access and the zoom is not on and I haven't changed the display or anything.  HELP!!

    Option - Command - 8  

  • HT1420 i tried updating the software on my i pod touch, and it looked like it was working cause it said "verifying update". but suddenly the screen went black and when i tried to turn it back on, it only had a picture of a usb chord pointing to the itunes

    i need help. i tried updating the software on my ipod touch, and it looked like it was working fine, because it said "verifying update", but suddenly the screen went black and when i tried to turn it back on, it only had a picture of a usb chord pointing to the itunes icon. what do i do?

    Your iPod has dropped into Recovery mode. You'll need to restore it via iTunes on your computer.
    http://support.apple.com/kb/ht1808
    Regards.

  • I downloaded the 5.1 from Apple Iphone4 from my computer and suddenly my screen went to big and I do not know how to get it back

    I downloaded the 5.1 on my Iphone and suddenly my screen on my phone has gotten huge and I cannot turn phone on or access anything. Can someone help me?

    Thank You Stedman1! You are great. I don't know why this phone can make me feel totally stupid at times.

  • I was using my I phone 4s and suddenly the screen flickered and the colours went strange

    Was using my I phpne 4s and suddenly the screen started flicking and is strange colours, phone still works in every other way. The screen has been replaced months ago. The creen also has a line 3/4 of the way through it. Is it fixable?

    Oh NO!!!
    http://www.youtube.com/watch?v=iJ90ZqH0PWI
    I think you really need to find out who is putting that stuff into your iTunes library....
    It's doing bad things to your mind....
    GB

  • Sudden black screen on Macbook Pro.

    Hi everyone,
    Occasionally when using my macbook pro the screen turns black, yet the macbook appears to be still running (keyboard lighting is still on and the notebook makes its usual sounds). This happens like once a week on a random occasion, but always seems to follow an action (last time the screen went black after emptying my iPhoto trash can). To activate my macbook i always have to manually shut down and reboot.
    I use a Macbook Pro purchased in 2010, with mac OS X Lion installed. This sudden black screen problem did not occur before installing Lion.
    Does anyone else experience this problem? And any suggestions on solving it?
    Kind regards,
    Tom

    I have the following failure since updating the EFI firmaware in my Macbook Pro 13" 2011:
    http://www.youtube.com/watch?v=yDkSah8rn3E
    I´ve been asking Apple for about a month to fix it under warranty but no answer so far, they say tha the error cannot be repoduced at the store so I sent the video to them, still waiting for an answer.

  • Sudden black screen (not kernal panic)...

    Hi,
    I feel like I may be posting too many issues over the past day, but this one's the most serious for me and this forum, I think, is the right one (someone steer me elsewhere if you think otherwise).
    I got my computer back two days ago after sending it in for both a faulty speaker and the dreaded whine. Here;s what they replaced (btw way, both the whine and speaker were fixed):
    SVC, MLB 2.0GHZ, 256VRAM(M1-CAP)MBP15"
    ASSY, INVERTER, NCC, MBPRO15"
    PCBA, LIO/AUDIO (M1) MBPRO15"
    FLEX ASSY, LIO/AUDIO, M1
    SPKR ASSY, PURCH, M1
    So, earlier today I went to print something out, fine, but for some reason the CPU continued to register something still in the process of printing. I had no idea this was the case, really, except that the computer sounded like it was roaring loud and when I checked the cpu info it showed the printer still cranking the cpu (between 55 and 95%), although the printer was not attached to the computer (I'd succesfully printed what I wanted to print).
    So, I went into the printer utility, noticed it seemed to be in process of printing another page; after I deleted that job the cpu slowly returned to normal, the roaring engines (fans) quieted down, etc. Then, all of a sudden, the screen went black. I cannot wake it (the sleep light is not on, btw, but I can hear some very soft noise under the lower left corner, so I know it's not completely shut off) although I'm sure I don't know all the tricks to try at this point. I should point out that this sudden blank-out has happened a time or two in the past two days, but I'd thought it was battery related. Did a calibration and the battery seems strong and fit. Anyway, the computer was plugged in to AC at the failures.
    Now that Apple has this sudden popularity and has not increased their tech work force, as far as I can tell--twice in the past week my wait time has been over 30 minutes--I'm more loathe to call them. Plus, it seems that, although I'm the first to admit I know little when it comes to saavy tech info on the Macs, despite my having been a Macuser for over 20 years (I go by feel, with all its ups and downs, I guess), it seems that I know more than the tech person i get on the line. This is disconcerting to me. Example, I was dealing with a mail app issue and I asked the tech person what the Envelope Index was and was told that..."uh...I've heard of it, but I don't know what it does." I love my Mac, always have, so this tech issue (long wait time and less than informed answers) strikes me as odd at best.
    Anyway, I post this here in hopes that I can get some assistance from some of you tech saavy and generous forum contributors might help. (I'm on hold now for this with Apple tech for 35+ minutes now.)
    Thanks, Paul
    PS I'm using another computer to post this now.

    Well, I've been with tech support now for 40 minutes (call's been hour and twenty so far) and it seems it's a hardware issue, not battery and not software. The black screen is happening faster and faster. Have reset PMU, PRAM, etc. No luck, so I'm on hold, being bumped to a higher authority. I'll mark this as answered, simply because it appears to be on the wrong forum...probably.
    PM

  • MSI GT620 sudden blank screen

    hi,
    now i wonder if anyone can help me, but yesterday i got a deal on a msi gt620 video card and after installing windows 7 and all my updates and drives, i was speaking with a member of family on skype and all of a sudden my screen just went totally blank. Now i'm not to familiar with nividia cards as ive always trusted ati, but for a steal deal with 2 gig of ram who could ever sniff it out, anyway i was wondering if anyone could advise if its a defective card from a batch as if so i only have 8 days entitlement to return it back to the place of purchase for a  return refund... thank you for reading

    Quote from: djdarren on 24-January-13, 20:28:15
    hi,
    thanks for that, allready used the driver that came with the disc as that was my first option and as after installing that it decided to go blank again, however i have 8 days to excersice my rights to take it back to the place of purchase... so your reccomendations would be???
    As its not behaving as it should with a continuous signal, I would suggest you return it to the shop and get a replacement unit as that one is obviously faulty if its just doing all the time regardless of drivers as you have 8 days left I would do it ASAP and get it switched out.

  • My ipad was in the process of updating (ios7) while at the same time syncing with my laptop.  suddenly the screen turned black and after few seconds the new itune icon  appeared on the screen.  the same icon appears even after i reset it.

    I was updating my ipad (ios7) while syncing with my laptop.  suddenly the screen turned black and seconds later a huge itunes icon appeared on the screen.  the same icon appears and not the usual interface even after resetting it several times. 
    please explain whta's happening.
    thank you

    See Unable to Update or Restore  >   http://support.apple.com/kb/ht4097
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • Help MacBook Pro 13" early 2011 suddenly black screen in Windows 7 SP1. EFI 2.2.

    Hi, everyone, I need help here.
    Apple MacBook Pro 13" early 2011 preinstall Lion version, EFI 2.2, Boot Camp 4.0. suddenly black screen in Windows 7 SP1 (black screen and also no sound at all, need to press power button to off). What happen?? Please someone tell me what to do?
    I have delete bootcamp HD and reinstall windows 7 but the problem is still here, I have reset PRAM and SMC too.
    The video on the black screen: (http://www.youtube.com/watch?v=z3dLTFSD-v8)

    Oh I actually have the problem in Mac OS, not even using the Bootcamp or Windows 7
    Csound1 wrote:
    lokiman wrote:
    I am having the exact same problem with my 13" early 2011 Macbook Pro. I have 10.6.8. I used the disk that came with the laptop to restore the OS to 10.6.7 but the problem existed there too. I have now updated it back to 10.6.8. The problem still exists. This doesn't seem to be limited to an OS version and seems like an issue with device driver or with hardware. I will try to take it to the Apple store and see if this gets resolved.
    You too have a black screen in Windows 7. ?

Maybe you are looking for

  • IDOC interface change platform (from MQseries to XI)

    Dear all, Need your advice. We have existing IDoc inbound and outbound communicating with partner by using EDI XML file port. FYI, MQseries is sitting in between our SAP system and partner system. For now, we are changing 2 things: 1. Replace MQserie

  • Reference Path

    I am trying to pass parameters between two dynamic pages that are on portlets on a page. I am calling the wwpro_api_parameters.get_value function without the reference path - but it does not seem to work. Does anyone have an explicit example of how t

  • Oracle D2k or sql developer

    Hi to all! I have completed ocp recently. Now I want to learn oracle developer. I would like to know Which software have to be installed to start with. Is it Oracle D2k. What is the purpose of SQL developer and PL/SQL Developer. Are they entirely dif

  • The Control Panel (top bar) no longer shows the location or size of an object when I select an object using the black arrow.

    I'm only able to see/adjust the location or size of the object by opening the Transform panel.  This is what I used to see: Now my Control panel looks like this where the above information used to be when an object was selected using the black arrow:

  • One to many mapping in OVD 11g

    I am trying to map the uid on a backend sun directory to two attributes in a virtual view, so the uid in the SunLDAP will be the uid & employeeNumber in the virtual view. I tried setting them both in the mapAttribute objectClass, but that did not wor