HT2480 message at the end of setting up exchange account email states: unable to verify account information
at the end of setting up exchange email the message states: unable to verify account information
Hi Guys,
I got exchange mail working. It seems issue is around "Push". I enabled "push", account verified & all worked well. After that I disabled push (I do not want it & to save mobile data use).
By googling, I found many have got it up & apple may fix it in it next iOS udpate.
Regards,
Mathew
Similar Messages
-
How can I get my MSN email account set up on my Iphone 4?
I have tried following the instructin from apple but continue to get error Unable to verify account but my info is correct. What am I doing wrong?If you have two-step verification turned on, turn that off, then try it again.
-
I can no longer make my AOL e mail work with Mac Mail on all my devices. When I try to set up the account and put in the correct aol account and password I get the message "Unable to verify account name or password". I know the account name and password is correct as I can open the AOL e mail page on Safari. I have changed the password, and it still does not work. AOL tech support has been no help. AOL email worked for years but last week due to suspected spam activity AOL locked my AOL account. I got that straightened out but now i cannot set it up on any of my devices: Macbook Air, Ipad, I pad mini and iPhone 6 without that message. I took everything to Apple store and everything is set up correctly on my devices. AOL tech support is no help and keeps giving me different solutions and answers, none of which has worked. Any solutions out there? All my Apple Software is up to date on all my devices
Delete your Gmail account from the Mail/Contacts/Calendars settings page, and then add it back in using the new Gmail password.
Matt -
Thunderbird puts a new message at the end of the thread.
Is there any way of changing this preference so that new messages are displayed at the top of the thread.
This is is more logical. You need to see new message in thread directly, rather than scanning to end of thread to see what is there.No it is not possible. The newest message is attached to the message it is in reply to.
The conversations add-on might better suit your needs. see https://addons.mozilla.org/thunderbird/addon/gmail-conversation-view/?src=ss -
Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?
try this...
This is how I managed to fix the problem...and I hope this helps others in the similar situation.
I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
I hope this will help others who are having problems to burn stuff on iTunes. -
How to display the information message in the end in BDC
Dear All,
I have been submitting a BDC for FB01, in a dialog program of mine.
The BDC gets executed successfully but it does not display the 'Documnet No....generated' information message in the end.
I have even written the following code in the BDC, after call transaction, to accomplish this, by assigning the value of genno (variable) to sy-msgv1, but it's not working.
call transaction 'FB01' using bdcdata1 mode 'E'.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
genno = sy-msgv1.Hi,
try this its easy .
create an internal table e_report for sucess with the fields you want to display .like the same for F_tab for failure .
so finally u will be having the success record in e_report and the failure in f_itab.
call transaction 'FB09' using bdcdata MODE 'N' MESSAGES INTO IT_ERROR.
IF sy-subrc eq 0.
E_report-status = 'Sucessfully Updated'.
e_report-belnr = itab-belnr.
e_report-year = fiscalyear.
APPEND E_report.
else .
F_tab = itab.
F_tab-year = fiscalyear.
F_tab-status = 'FAILED'.
APPEND F_tab.
finally print this
sort e_report by belnr ascending.
LOOP AT E_report.
at FIRST .
WRITE:/'**********SUCCESSFUL RECORDS ARE **********'.
FORMAT COLOR 6.
WRITE:/ 'Document Numer',20 'Year',35'Status',54 ''.
ENDAT.
FORMAT COLOR 3.
write:/ E_report-belnr,20 E_report-year ,35 E_report-status.
FORMAT COLOR OFF.
at LAST.
write:/ 'Total No.Of Successful Records:',sy-tabix.
FORMAT COLOR OFF.
ENDAT.
RESERVE 20 LINES.
ENDLOOP.
IF F_tab is initial.
FORMAT COLOR 1.
WRITE:/ ' NO Errored Files'.
FORMAT COLOR OFF.
ENDIF.
WRITE:/ SY-ULINE.
new-PAGE. " to display in a new page
sort f_tab by belnr ascending.
LOOP AT F_tab.
at FIRST .
WRITE:/'**********FAILED RECORDS ARE **********'.
FORMAT COLOR 6.
WRITE:/ 'Document Numer',20 'Year',35'Status',54 ''.
ENDAT.
FORMAT COLOR 5.
WRITE:/ f_tab-belnr ,20 F_tab-year, 35 F_tab-status.
at LAST.
write:/ 'Total No.Of Failed Records:',sy-tabix.
ENDAT.
ENDLOOP.
ENDIF.
if they want to display in the excel sheet pass the internal table to the F.M.
plz motivate me.
by rewards.
thanks
vinoth -
When trying to download itunes 10 I receive this message at the end of the install.There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.
There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
When synching my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?
try uninstalling and reinstalling itunes on your computer. here is a link for that http://support.apple.com/kb/HT1925
-
I am trying to activate my iPhone 4 via iTunes but i keep getting the error (1) message at the end of the restore. I believe my iphone has to be in DFU mode but i already tried that and same thing. Does anyone have any suggestions?
The error is just a simple error message just like (1013) instead it says (1). The iPhone I am trying to activate has been activated before I just currently have no service and I think that activating it will solve the problem. I just can't restore through iTunes because it won't finish. I get the message every time I try to restore.
-
To create an iTunes account with a gift card, I receive this message at the end: Contact iTunes support to complete your transaction. And then, nothing! What the **** is it?
It means contact itunes support
-
I have been trying for weeks to download update 10.7.5 and cannot do so. I do get a message at the end - "connection reset by peer". Can anyone shed any light on why I cannot download this update and what the message may mean? Thanks.
Take a look at this discussion and the ones listed under "more like this" in the right column:
https://discussions.apple.com/thread/4166820?start=0&tstart=0 -
Problems archiving old messages at the end of the year?
At the end of 2007 I'd like to create new mailboxes for messages sent and received in the year, date them, and move the messages across into them; leaving the Inbox and Sent box empty and ready to handle messages for 2008. Is this a reasonably straightforward thing to do? Are there potential pitfalls I should be aware of?
Yes, it’s reasonable and straightforward, and is also what I do, except I don’t wait till the end of the year to archive my messages. Instead, I create a (white) folder for each year, including the current one, and organize my mail by topic into (blue) sub-mailboxes there as I read them. My Inbox only contains messages (if any) that are waiting for me to do something with them.
Are there potential pitfalls I should be aware of?
The main pitfall you should be aware of would be not doing that and leaving all your mail in the account mailboxes indefinitely. Using Inbox and Sent for archiving purposes (which a lot of people do) is a bad idea.
Another thing to be aware of is that you shouldn’t use the same folder as both a mailbox (i.e. to store messages of its own) and as a parent folder for other folders. Mail allows that duality, but doesn’t handle it very well, and it’s better to not try to “take advantage” of it.
You may also want to read this:
Blue and white Mail folders explained
BTW, the title of your post is “problems archiving old messages at the end of the year? -
Phone says there is a new text message but there is no blue dot next to any of the conversations, nor is there an unread message at the end of the conversation.
my ipod is not the newest update possible as i said i tried to update but it wouldnt let me as it wont let me on wifi sources such as safari facebook and other apps which use wifi.all the apps are fully updated
-
Can't set-up outlook account on my Iphone5, IOS 7.1.2.
after enter info i get "Unable to verify account information."
What to do?ONly paid hotmail account can be set up on the device/ computer. Contact hotmail for support
-
I keep getting the message "unable to verify account information" how do I fix this? It happened out of no where and I tried re-entering the exchange info and it won't stop giving me the message...any ideas?!?
I already reset network settings like someone suggested, but still cannot get my exchange acct to work.I'm having the same problem but with high speed access.
Anyone know the answer?
~Chris
Maybe you are looking for
-
OBIEE Report keeps running for some users
Hi Mates, I am facing a issue, while running the report. This reports keeps on running and expires after the max time out for few of the users whereas for few users it displays the output in 30 secs or so. Just to add in Oracle Identity Management ha
-
Data is not stored in database
dear all i have creation page in that default 5 should be disaplyed like usd0.00 as well as those items should be stored in db usd (came from functional currency came from set of books) when i take message styled text and set value to those it will n
-
How to remove a char in the Input file?
Hi All, I need to remove a particular char in the input file before it is read into an Internal table. Is there any way to do such processing in file? Plz guide me reg this. Thanks, albert.
-
I have hp pavilion dv6-3113st i try to make recovery from my disks but give me error 0xe0f00013
i have hp pavilion dv6-3113st i try to make recovery from my disks but give me error 0xe0f00013
-
<Subject line modified> Dear Friends, I am trying to put a validation like.. When i use Document type(ZB-service PO),if it is has any item with "Returned" indicator means..for that line item the stock type should come as"Unrestricted Stock"by default