HT2486 Is it possible to notate in each Adress Book Card which Groups it belongs to?

It would be helpful to know ofr each Address Book entry which Groups they belong to. Does anyone know how to notate on each entry which Groups they belong to?

idip31 said on http://www.reddit.com/r/apple/comments/2juazy/can_you_nickname_your_credit_cards _associated/ that "You cannot change the name of the card to a nick name. And you can't change the design, it will be whatever is associated to it by ApplePay/Bank".
Hopefully a feature like this will be added in a future update of the stock application.

Similar Messages

  • I have several groups on my Mac Address Book and would like to sync only one group to each IOS5 device (each device getting a different group).   Is this possible?

    I have several groups on my Mac Address Book and would like to sync only one group to each IOS5 device (each device getting a different group) via iCloud.   Is this possible?    If so, how is it done?
    Thanks in advance,,,,,

    Can we control syncing at all? I can't seem to make a Local/On My Mac group in Address Book.

  • I forgot my password for my mac book retina which I just bought 1 1/2 months ago. Is there any possibility to reset it?

    Hi, I forgot my password for my mac book retina which I just bought 1 1/2 months ago.
    Is there any possibility to reset it? I guess (not sure) the operating system is os x.

    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    If you are unable to boot from an installer DVD:
    (these will only work on Leopard or earlier)
      1. Boot to Safe Mode by restarting and after the chime press and hold down
          the COMMAND-S keys until a black screen with white type appears.
      2. At the prompt, type the following commands pressing return after each
          command line:
         /sbin/fsck -yf
         If you do not receive a "Filesystem OK" message then repeat this command
         until you do.  If after seven tries you still do not receive a "Filesystem OK"
         message, then the system is corrupted and needs to be reinstalled.
         mount -uw /
         cd /private/var/db/netinfo
         mv local.nidb local.old
         rm ../.AppleSetupDone
         shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
    This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
    Reset Admin Password Using The Terminal
    You can reset the password by printing out (or writing down) and carefully following these steps.
    First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
    Now, start in Single-user Mode. It should boot into a command line.
    Enter these exact lines. Press RETURN after each.
    mount -uw /
    ifconfig lo0 up
    cd /var/db/netinfo
    netinfod -s local
    Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
    The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
    Now, enter:
    sync
    reboot
    and the machine will reboot. The admin password should now be changed.

  • Is it possible to work on 2 Blurb books at the same time in LR4?

    Is it possible to work on 2 Blurb books at the same time in LR4?

    Yes, sure you can.
    Just make sure that you create a collection of the images used for each book.
    Otherwise when you go back to a book you previously worked on the images won't be found.
    Also, as said earlier create a <saved book> - top right in the Book Module.

  • Why it is not possible to install apps on an SD card on a Win 8.1 tablet?

    Why it is not possible to install apps on an SD card on a Win 8.1 tablet? If it is possible to install apps on SD card in Windows phone 8.1, why is it not possible on Windows 8.1? What sort of design philosophy you follow that gives better features on
    a mobile version of the OS but not on the parent OS? Kindly explain if you can!

    Hello,
    I'd ask in the
    Windows 8.1 forum on Microsoft Community.
    As the Microsoft Community is on a different platform, we cannot move the question for you.
    Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime.  All of these devices are connected to itunes through the one account.  How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

    I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime.  All of these devices are connected to itunes through the one account.  How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

    I started to do that then it said that this will become their apple I.D or similar and then I thought that will disconnect them from the same iTunes?  I want them still on my iTunes as they are only young (8 and 10)?  Or have I got this all wrong and even if I do set them up with a different e-mail will they still be on my itunes?  For example if they want to purchase an App will it still go through my account even if they use their ipod?

  • When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all.

    When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all. Any help is greatly appreciated.

    Hey Grupo Castillo,
    Thanks for the question. You can actually configure this behavior from Mail preferences:
    1. Choose Preferences from the Mail menu.
    2. Click Composing.
    3. Deselect the checkbox for "When sending to a group, show all member addresses".
    When you send an email to the group, only the groups name will be seen.
    Mac OS X: Mail - How to Hide Address Book Group Member Names When Sending an Email
    http://support.apple.com/kb/TA21082
    Thanks,
    Matt M.

  • Mobility Group Table *MUST* be populated in each WLC in same mobility group

    For what it's worth,
    I recently discovered that when you have multiple controllers and want to implement Mobility Groups, more is needed than simply entering the same Default Mobility Group Name for each controller within the mobility group. The following is required:
    a) The IP address of the "Virtual" interface on each controller must be identical on each controller within the mobility group.
    b) The Default Mobility Group Name must be identical on each controller within the mobility group (case sensitive).
    c) The mobility table must be populated with an entry for each controller within the mobility group.
    Otherwise, you will see some inexplicable behavior such as:
    * LWAP access points refusing to change to a different controller, even if their primary controller is explicitly set and the LWAP is rebooted.
    * LWAP access points unable to find any other wireless controller other than the one pointed to by the "CISCO-LWAPP-CONTROLLER" DNS entry (presumably, this would also be the case if DHCP Option 43 is used to point the LWAP to a controller). Once the first controller reaches its max. capacity of LWAPs, no more LWAPs can join.
    * Even MASTER CONTROLLER MODE has no effect.
    Cisco TAC was able to explain the great mystery of the Mobilty Group Table to me. However, unless you know your problem is related to mobility groups issues, you might not know to start there (I know I didn't).
    The least difficult method I have found for populating the mobility group table is as follows:
    Build a text file with one entry for each controller in the mobility group as follows:
    Log into the GUI for each controller and selecting: Controller -> Mobility Management -> Mobility Groups, click the "EDIT ALL" button and copy the MAC and IP address from the text box into a text file using NOTEPAD. Repeat this for each controller, creating a new line for each:
    The format for the entries is as follows:
    00:1a:6c:91:22:A0 192.168.20.44
    00:1a:6c:91:22:B4 192.168.20.45
    Once the text file is completed (one entry for each controller in the mobilit group), click the EDITALL button and copy the entire contents of the text file and paste it into the text box on the controller GUI, click the APPLY button and click Save Changes. Repeat for each controller.
    Again, make sure that the following settings are IDENTICAL in each of the controllers in the Mobility Group:
    * The IP address of the "virtual" interface ( Controller -> interfaces ) must be the same on all controllers.
    * The "Default Mobility Domain Name" ( Controller -> General ) must be identical on each controller in the mobility group (note: the Mobility Domain Name is case sensitive).
    After making changes directly to the controllers, a "refresh from controller" in the WCS might be needed to get the WCS to attempt to synchronize itself with the controllers.
    Here is a link to the 4.2 Wireless Controller Configuration Guide which discusses this in greater detail.
    http://www.cisco.com/en/US/products/ps6366/products_configuration_guide_chapter09186a00808e638b.html
    It is unfortunate that there are currently no mechanisms in the WCS 4.2 to make these changes in bulk (i.e.: The WCS has no Controller Template to do this).
    Also, if you ever need to replace a controller, you will need to update the Mobility Group Table in each controller in the Mobility Group (since the tables will have the MAC address of the old controller which will now be different in the new replacement controller).
    Despite having used the "unified" product for some time now, there are still surprises from time to time. I just thought that I would share my experience for those who may want avoid it and/or who may be encountering any of odd the behavior described above.
    - John

    Hi John,
    Nice work with this very relevant info! Please post a short reply here so that we can give this the nice rating it deserves :)
    Thanks again!
    Rob

  • Is it possible to use Siri to send text messages to groups? I want to be able to say to Siri "Send a text message to the people in 'group 4' category." I then dictate the text message, confirm, and out it goes. Groups of 100 to 250 contacts.

    Is it possible to use Siri to send text messages to groups (categories, distribution lists)? I want to be able to say to Siri "Send a text message to the people in 'group 4' category." I then dictate the text message, confirm, and out it goes. Groups of 100 to 250 contacts. What app(s), if any, would I need? Is this in anyway dependent on my carrier?
    Thanks in advance for your help.

    Hmmm, that's strange - just checked again and it is 1066288.
    Note 1066288 - ESS LEA:Workitem XXXX cannot be executed in status COMPLETED
    Perhaps you can't see it because it is a "Pilot Release"?
    Release Status: Pilot Release
    Released on: 26.02.2008  04:54:32
    Priority: Correction with high priority
    Category: Program error
    Primary Component: PT-RC-UI-XS Self Services Web Dynpro

  • Is it possible to extract a VI from an executable which has debug mode enabled?

    It is a curiosity question from a client.
    Is it possible to extract a VI from an executable which has debug mode enabled?
    Since the block diagram would not be in edit mode....  Is it possible to "peer" into the executable, look at a VI and recover the block diagram?  This owuld be for a deleted VI that is part of an executable which had debug mode enabled..
    Did anyone try this?
    Curious..

    Extract VIs from an EXE?  No problem.  Even if debugging isn't enabled you can extract VIs, they just won't have block diagrams, and may not have front panels depending on if they were removed in the EXE making process.
    Attached is an example project for making an EXE, the EXE itself, and a VI for extracting VIs from the EXE.  The code is quite primative and it was just meant to demonstrate how this can be done.
    To extract the Main.vi from the Application.exe, run Extract Main.vi from EXE.vi, provide the path to the EXE and the path to where the VI should be saved and then run the VI.  This VI will set keys in the INI file for the application, then run th EXE.  Then it opens an application reference to the EXE, then opens a VI reference to Main.vi.  Then it aborts Main.vi, and extracts it.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
    Attachments:
    Test EXE Extract.zip ‏763 KB

  • Is it possible to read the file using File Adapter which is in client machi

    Is it possible to read the file using file Adapter which is in client machine(on the same network).Then what is thee need of FTP Adapter?

    You can achieve that by exposing your client machine as a drive, then you can go using file adapter.
    FTP adapter will help you to communicate with different machine which is in different network.
    It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
    Thanks,
    Vijay

  • Is it possible to do development in bootstrap framework that which the design was done on adobe edge reflow?

    Hi,
    i want to do responsive design.so i choose adobe edge reflow is it possible to do development in bootstrap framework that which the design was done on adobe edge reflow?

    You should probably ask in Edge Reflow CC Preview
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Is it possible to make a planning on a cost element group?

    Is it possible to make a planning on a cost element group? I have created several cost element groups with the appropriate hierarchy. Now my aim is to try to allocate cost on an element cost group.
    Thank you in advance for your reply.
    Best regards
    Pascal Cuenin

    Yes you can - There are multiple ways of doing it.
    If you have the BPS module, you can do it over there - If you want to do it in R/3, you can there too. Go to KPZ3 to view previous budget planning for Cost Center Groups.
    Hope that helps.
    Thanks,
    Nandita

  • Is it possible to download software from the Adobe site which will enable me to use the raw processor in Elements 9, to work on images shot with a Nikon D800 DSLR?

    Is it possible to download software from the Adobe site which will enable me to use the raw processor in Elements 9, to work on images shot with a Nikon D800 DSLR?

    The D800 is not on the list of supported cameras for the Camera Raw 6.5 update, bur the D80 is:
    http://www.adobe.com/special/photoshop/camera_raw/Camera_Raw_6.5_ReadMe.pdf

  • Is it possible to find the mac adress of my stolen macbook pro?

    Is it possible to find the mac adress of my stolen macbook pro? I've mad ea research an found out that the Mac Adress is really important to trace the device. But it's too late to check that on my laptop.. What should i do?

    I understand that. But about your only shot without the box is to supply Apple with the serial number and ask them for the MAC info. My thought was if you can supply the serial number it's more proof that you're the owner. There's really no other way to get it without their help.

Maybe you are looking for

  • Where did my music go?  I uploaded my library consisting of Apple store purchases, CDS's and Amazon purchases.  A small precentage shows up in itunes now

    Where did my music go?  I subscribed to aPPLE'S Cloud and uploaded a nice sized library consisting of Apple Store purchases, CD's I downloaded over a period of years, and some MP3 trax purchased from Amazon.  Now, only a few of my songs appear in iTu

  • 2 computers, 2 libraries- 1 iWeb

    I want to Publish an iWeb Gallery and my pictures are in iPhoto 6 on my laptop. I Publish iWeb galleries through my desktop, so I need to get the photos from my laptop to my desktop. No problem, I export them, send them over the LAN to my desktop and

  • Change (or add) a password to Active Directory with Java and JNDI

    I've create a new account in LDAP with attributs, It's ok. But a can't initialize the password, i've tryed some samples without result. Maybe it's a SSL problem (i don't know why, i read it somewhere). my code : import java.util.*; import java.io.*;

  • Advice on sound filter

    Hey ya'lls, I was wondering if anyone had a quick opinion on what type of audio filter I may be able to use on a segment I have. In one feature, my talent is speaking into a microphone and (much to my frustration) is holding the mac a little too clos

  • Find the index of a missing row

    Hello, I would like some help in designing this query. For example i have a table with these record. ID_BOOK | Name | Surname 1               Name1 SurName1 2               Name2 Surname2 3  Name3 Surname3 4     Name4 Surname4 6  Name6 Surname6 where