HT2490 how do i change my time

i just got a new computer, and I can't figure out how to change the clock...

thank you Frank! I realized I had to unselect the "set date automatically" even though it is set to American/US time. Thanks for your help!

Similar Messages

  • How do you change the time on the all day setting in the iCal on an iPhone?

    I updated to ios 7 and when I want to put an all day event in. When I set it for an alert, it will only allow it to go off at 9:00 am. How do I change the time of 9:00?

    rlh264 wrote:
    When I set [an all day event] for an alert, it will only allow it to go off at 9:00 am.
    That is not exactly true.  The default time for the alert is set to the day of the event at 9:00 AM.
    So, there are two points to be made:
    1.  You can change the default time of the alert for an all day event at Settings > Mail, Contacts, Calendars > Default Alert Times > All Day Events.  But those choices are limited, and all occur at 9AM (on some day).
    2.  You can make the event almost (but not quite) an all day event (for example, a 23 hour long event), and then you could edit the event to have much more flexibility about exactly when the alert occurs.

  • How do you change the time of day presets in ical?

    How do you change the time of day presets in ical?  I would like them to be only 1 hour difference, with the preset start times of 10:00 am and end time of 6:00 pm, if I have anything starting after 4:00 pm it also changes the date to the next day.  Incredibly annoying!

    Hi there jenni6,
    It looks like this is possible in the Calender prefernces. Take a look at the article below for more infromation.
    Calendar (Mavericks): General preferences
    http://support.apple.com/kb/PH14994
    -Griff W.

  • How do i change the time line in Au from time since recording start to the actual time?

    how do i change the time line in Au from time since recording start to the actual time? I have a recording that was started at 10:00 but obviously in Au it starts at 0:0:00. Basically i want to time shift this to 10:00:00

    In the Properties panel, modify the Start Time parameter.

  • HT204053 How can I change the time to central standard time so my calendar entries are correct?

    How can I change the time to central on my calendar

    Settings > General > Date & Time > 24-Hour Time > OFF.

  • How do I change he time the screen reverts to the Log in requirement when idle.

    If I do not use the system for more than a few minutes it reverts to the Login screen requiring the typing of the pasword
    all day long, How do I change this time out feature to lengthenit.
    Thanks   O T
    This question was solved.
    View Solution.

    Hi,
    Open windows Control Panel, open Personalization, click the Screen Saver link in the bottom right and in the following window adjust the 'Wait' time to a more acceptable figure and if you would rather not have to Log-on after this time period, remove the tick from the box next to 'On resume, display log-on screen'.  Click Apply, then Ok to save these changes.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How can I change the time shown that the picture was taken on the edit panel - it is an hour slow

    How can I change the time shown that the picture was taken on the edit panel - it is an hour slow

    Thanks!  I can't believe I missed that!

  • TS3920 I updated my iPad to iOS 7.02.  Now my time and calendar are off by 3 hours.  There is no longer a Date and Time section under General settings.  How do I change my time?

    I updated my iPad to iOS 7.0.2 and the time is 3 hours off.  There is now no longer a date and time section under General settings.  How do I change the time on my iPad?

    In iOS 7 there still is a Settings > General > Date and Time. Use it to correct your time or set it to Set Automatically.

  • How do you change ring time before giong to viocemail?

    How do you change ring time before phone goes to voicemail?

    You can configure many call-handling features on the iPhone, but not the number of times an incoming call rings before it goes to voicemail. Only your carrier can change that variable. Wireless service providers uniformly grant incoming calls four rings within roughly 20 seconds before sending them to voicemail. If you find that ring length too short or too long, contact your carrier to adjust it.

  • How do I change the time format in the menu bar?

    I've gone to system preferences - language - date and time, and customized the time for 24 hour time with no colon between HH and MM.  The menu bar time display doesn't reflect this:-(
    There are some 5 year old posts about this not working, but nothing recent.

    You may have already these suggestions....
    See KB Article:  http://support.apple.com/kb/PH11250 
    YouTube tutorial:   How to change your time and date preferences | Mountain Lion
    http://www.youtube.com/watch?v=6HkKZU8Mfmg 
    You can search YT for others.

  • How do you change the time of an appointment in the new calendar Monday defaults to 10am tuesday one minute past and sunday 1 minute before

    Installed Ios 7 and new calendar does not allow me to change the time of appointments .
    Ie Monday 7th October try to put appointment in and gives me 10am day before 9:59am day after 10:01am.

    Wow!
    I'm not going to be of much use regarding answers but I sure am going to watching this post like a hawk for any replies. My package is a slightly diluted version of this and I do find the BBtalk and data limits hard to make the most of as well.
    If nothing else this totally highlights how complicated BT have managed to make their packages.
    A cynic would assume that they are trying to catch us out at every step and for us to either be overspending or not really getting the moneys worth.

  • How do you change the time zone/time on the iPod nano (6th generation)?

    Hello,
    I recently moved to a new city in another time zone and I am not able to figure out (or find out on forums) how to change the time on my 6th gen iPod nano. It's something I would like to fix because the Fitness application records your activity according to time. Any advice would be great!

    Go to SETTINGS on your iPod Nano 6G.
    From SETTINGS -> GENERAL -> DATE & TIME -> TIME ZONE and select the right zone/location form there.
    Axel F.

  • How do I change the time it takes for a call to go to voicemail

    I simply want to change the setting that tells voicemail to pick up after a certain time when I don't answer. What is it set to by default and how do I change it?
    I have Vonage, and sometimes I setup 'simulring', so it rings my iphone, my wifes iPhone and our home phone at the same time. Whatever phone picks up first gets the call. But I want my phone to go to voicemail before the other phones do, in the case nobody answers.
    I have checked the manuals and I'm not sure if this is even possible

    Yes there is a way to set up the default number of "time" not rings. Default is 20sec I have mine at 30sec (max)
    Voicemail No-Answer Length
    check to see vm number *#61#
    Cing 61*1areacodevmnumber*1130#
    First Dial *#61# to see your voice mail number (this is the number that the phone fowards the call to when there is no answer) write it down including area code
    Then dial 611(VOICEMAIL NUMBER)1130# then dial or send
    There should be no spaces and make sure you enter the number correctly (ie) 61*13235552323*1130# then you should see a comfirmation.

  • How do you change the time signature in Ultrabeat? I want to record something in 3/4. Thanks

    Hello,
         I want to record a song in 3/4 using Ultrabeat. I can't figure out how to change the time signature in Ultrabeat. Any ideas?
    Thank you,
                        Evereman

    Hi
    You need to take into account the Resolution (how big is each step) and the number of steps (the Length)
    For example, with a resolution of 1/16, one bar of 3/4 would be 12 steps, 2 bars 24, etc
    You can set these parameters at the bottom of the UB interface
    CCT

  • How i can change date time

    my ipod language is english but time date & calender showing in arabic how i can change it from arabic to english

    There are quite a few windows version of the unix touch command which will do exactly what you need.
    I'm sure there is a way to call it even within LabVIEW, using "system exec". You might even be able to call cygwin1.dll using a "call library node" (I have not tried this).
    - There is the full featured cygwin environment for windows. "touch" is in fileutils.
    - There are also simple ports such as Touch For Windows.
    (quote from this page:
    What Does It Do?
    For those who don't know, here's a simple explanation: It updates the dates associated with a fi
    le to whatever you want it to be. It can change access, modification and creation dates. You as a user can update them independently of each other, you can update them with any possible date. Dates can be now, user specified or copied from another file. If you try to touch a file which does not exist, this command will create it for you (empty of course)." )
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for

  • PC with 2 two accounts  and home sharing is not working in itunes

    I have a PC with two user's accounts and we both have individual iTunes libraries and accounts. We have home sharing turned on both nothing is showing up in the new iTunes--any ideas why?

  • Why doesn't YouTube video work in my webpage?

    I've researched Dreamweaver itself, Adobe in general plus any other information source but cannot get a YouTube video to work in my web page.  I've done all the 'Share', 'Embed' stuff, created divs, ignored divs.........nothing works.  I copy the cod

  • Video Card Detection

    I have 2 Video Cards installed an ATI Radeon HD 2600 XT (Vram 256 MB) and a ATI Radeon HD 5700 (Vram 1024 MB) In my Performance GPU Settings only the 2600 is recognized. Can Photoshop CS5 recognize and access both cards? Must I remove the 2600 in ord

  • Creating simple jquery TABS in apex

    All, I am creating basic jquery TABS in apex but i realized its just not working as i thought... i really need help on this please? what i did created in my region i added below code <div id="tabs"> <ul> <li><a href="#">Nunc tincidunt</a></li> <li><a

  • Spell Checker in forms

    Dear Experts, My form version is Forms [32 Bit] Version 6.0.8.11.3 (Production) Oracle Toolkit Version 6.0.5.35.0 (Production) PL/SQL Version 8.0.6.0.0 (Production) Oracle Procedure Builder V6.0.8.11.0 Build #449 - ProductionI have requirement to che