HT2494 Using a webcam on an external monitor with macbook pro?

I have a macbook pro connected to a dell external monitor. I was wondering if it were possible to use my monitors webcam instead of having to use the one built in on my macbook pro?

bigred1622 wrote: ... possible to use my monitors webcam ...?
Yes it's possible if the monitors webcam is Mac OS X compatible. If you do not have access to the system compatibility documentation for your monitor, Dell or the people who sold you the monitor should be able to tell you.
Message was edited by: EZ Jim
Mac OSX 10.8.3

Similar Messages

Can I use Front Row on external monitor with MacBook Pro's cover closed?

I've seen that you can use the remote to control Front Row even when the lapatop's cover is closed (on a MacBook Air). Is it possible with a first generation MB Pro? Are there special settings?
Thx

You can use a MacBook Pro in "clamshell" mode if you have the AC adapter plugged in for power, an external display attached and an external keyboard and mouse (USB or Bluetooth) to wake the computer after it's been closed. This is the official word from Apple:
http://support.apple.com/kb/HT3131
However, even if you don't have a keyboard and mouse, you should still be able to wake the MacBook Pro using the Apple remote by pressing the "menu" button. (You do still need to have the power plugged in and the display plugged in.)
-Doug

Using external monitor with macbook pro?

Can someone tell me how to get my Dell desktop monitor to work with my MBPro? I connected with usb/vga cable; i have a pic on the external monitor and the mouse pointer will move about the screen, but that's it; no funcitonality. I don't know what do do next? Settings?

It sounds like it's working perfectly, you have a functioning image and pointer. But you may be expecting to see some of your windows. It sounds like the monitor is connected in Extended Desktop mode, which means it's working as an additional area to your existing desktop, like sliding another table next to yours. So, if you want to see some windows and programs over on the new monitor, you should drag them there. Also, open your Displays system preference to see this and change settings.
If you expected to see the same image on both your monitors, you need to switch to Mirrored display. If there is a Displays icon on your menu bar, you can switch it there.

How do I get full resolution on external monitor with MacBook Pro

Hi,
I have an early 2011 MacBook Pro:
https://support.apple.com/kb/sp620?locale=en_QA
And it states I can run an external monitor at 2650x1600. I have bought a BenQ BL2710 which goes to 2650x1440:
http://www.benq.com/product/monitor/bl2710pt/
I can only get 1080p - the OS (Mavericks) does not have any option to go higher. I have tried connecting MiniDisplayPort to DVI via an adaptor, and I have tried MDP to HDMI using an adapter. Have I missed something?
Thanks,
Nick

Figured out I need MPD to DP has HDMI has a max res of 1080p.

External monitor with MacBook Pro

I have a new Macbook Pro and have it hooked up to an external monitor and an USB Apple keyboard in my home office. How am I able to power the laptop on without opening the display and have it display only on my external display? When I am at home I'd like to use my external monitor and not my Macbook display.

Having the computer with the lid closed is dangerous cause even when just browsing the web with flash content it starts heating up and I've heard about casess of melted displays. Besides, the wifi strength is reduced and you can't use the keyboard and the trackpad.
So, for Lion users, it's possible to just use the external display with the lid open:
1. In Mission Control Preferences activate one Hot Corner to put the display to sleep.
2. Connect the external monitor and plug in the power source to your computer.
3. Move the mouse to the Hot Corner to put the display to sleep.
4. Close the lid and wait a few seconds.
5. Open the lid and voila!
Take care!

Two external monitors with macbook pro

attempting to use my MBP in clamshell mode with two external monitors. Only thing I get is the same screen on both monitors. I am also using VM Fusion running a windows xp interface.
Tried just mac software...same problem. Won't set up as two seperate monitors.
HELP

My understanding is that a "splitter" simply shares the same output signal between two monitors, causing both to display the same image at all times. That's exactly what you're seeing, right? So I think it's because you're using a splitter, instead of a device or devices that enable the monitors to receive different signals. Unless the manufacturer or vendor of your splitter can assure you otherwise and help you get your setup running the way you want it to, a better alternative would be to connect one monitor to your computer's video-out port, and the other to a USB port using an adapter like this:
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
Note that the monitor connected via USB won't be as responsive as the one connected to the video-out port.
A more expensive option that would enable both monitors to be equally responsive is the Matrox DualHead2Go. If you have a MBP with a Mini-Displayport or Thunderbolt port, you would need the DP Edition of the DH2Go.

Intermittent static on external monitor with MacBook Pro

I have a MBP (mid-2009) and added an Acer external monitor last year. When I plug the monitor in or the computer wakes for sleep I often get this intermittent static; the monitor alternates between displaying correctly and displaying static. The period between static can change...one time when I plugin the external monitor it can be 20 seconds and the next time I plug it in it might be 2 seconds between static and regular display.
I can't imagine I'm the only one that has this issue. I've searched endlessly but haven't found anyone else with the same specific problem. Hopefully there's a solution.
Something that's extra quirky is that I run any number of programs on a daily basis including stock brokerage application(Java based), browsers, programming applications, etc. but none of them triggers this behavior EXCEPT iTunes. Not sure if that helps but maybe it does.
Any help is greatly appreciated. I figured I've wasted an hour or more of my life plugging and unplugging the monitor cable trying to get it to run without the static so it was time to ask for help!
Here's a link to a video...I figured this would make it easy to understand the issue. http://tinypic.com/player.php?v=11al7yv%3E&s=8#.U3bfpFhdVK4

Hello dscher,
The article linked below provides some useful troubleshooting steps that you may find helpful.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

How to connect an external monitor to macbook pro. The monitor has no usb connector without a usb

How to connect an external monitor to macbook pro. The monitor has no usb connecter, only a port.

Most MacBook Pro models have a Mini DVI port, a Mini DisplayPort or a ThunderBolt port for connecting an external display. USB does not have enough bandwidth to support a responsive display connection.
What model MacBook Pro do you have, by year, CPU speed or MacBook Pro 3.1 designation?

HT3964 connected new external monitor to macbook pro, was working but now have no power, black screen in laptop. monitor purchased with advice from tech and set up also. Worked fine for an hour and then quit

Have just connected a viewsonic external monitor to macbook pro 10.6.8, had everything up and running fine for about an hour then the macbook quit. No power (ws running off power source) Have I killed my macbook? Help!

Aha, all is good.
I went to Library/ColorSync/Profiles/Displays
and to home/Library/ColorSync/Profiles/Displays
and deleted all SyncMaster.icc files. I did leave behind one SyncMaster file in the home/../Displays which had an old date and I new was ok.
Rebooted, plugged in SyncMaster, and a new icc file was automatically created in the /Library/../Displays folder.
My display works normally, now.

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help!

Hi ..
Shift key boots into Safe Mode, not Recovery.
This only works on a Mac running v10.7 Lion or later.
Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities to repair the startup disk and restore OS X using OS X Recovery
If you can't boot into Recovery Mode, help here > Mac OS X: Gray screen appears during startup

Which cable to use for 2 external monitors on MacBook Pro?

Hy there,
I'm currently using one external monitor on my MacBook Pro via a mini display to VGA cable from apple.
I would like to hook up another (second external monitor) one using also VGA.
After doing some research I've learned that I should use some sort of adaptor cable for this. I'm just wondering if there is any way of getting one of there for a decent price in europe? (decent is sub €100).
Thanks a lot!

Hello, Carl.
Thank you for visiting Apple Support Communities.
Here is the best resource I could find that gives the best option.
About Mini DisplayPort to HDMI adapters
http://support.apple.com/kb/HT4241
Cheers,
Jason H.

External Monitor for Macbook Pro (Use for Audio)

Hey
Well I have a Macbook Pro and am looking to get an extra monitor because I am an Audio Production major and need the space.
I'm looking for about 20-22 inch range and maybe one that swivels so it is horizontal or vertical.
Please let me know what you think.
Thanks
Ryan

Be very careful what you buy, and if at all possible test it with the computer before you buy it. A few times. These things just stop detecting external monitors for no reason sometimes, as well as just refusing to ever detect certain monitors.
Maybe someone here has a set-up that's working for them, that's your safest option.

Best external monitor for macbook pro 15" to use for Aperture3

Hi, I have a macbook pro 15" running on Mountain Lion. I would like to buy an exernal monitor to work on Aperture 3. After reading on the net I am still quite confused as what is the best product to fit a good compromise for quality/price/compatibility
My budged is under 600€, so size should not exede 24".
Dell U2413 gets good and bad advise, not sure how it would work with Apple either. Most people talking about it are not on Apple products.
Any of you out there can offer some personal experience on the matter?
Thank you for your time

Be very careful what you buy, and if at all possible test it with the computer before you buy it. A few times. These things just stop detecting external monitors for no reason sometimes, as well as just refusing to ever detect certain monitors.
Maybe someone here has a set-up that's working for them, that's your safest option.

External Monitor on Macbook Pro freezes after deleting old profiles

Environment:
15 inch MacBook Pro, Mid 2010, 2.4 GHz, 8GB, NVIDIA GeForce graphics
Yosemite 10.10.1
External Monitor: Samsung SyncMaster 245T running in Extended Mode with the laptop
I have been using the above setup for several years with no issues. Yesterday I did a calibration of the external SyncMaster monitor with Datacolor Spyder3 as I have done many times in the past. The calibration was saved, but an error message flashed by before the file was saved. Checking with the ColorSync utility, the new saved colorspace appeared somewhat smaller than the last one.
I noticed that I had too many old profiles from previous calibrations still there, so I tried cleaning the directory up. I opened System Pref/Display/Color, clicked on an unwanted profile and delete the profile, and reset it to the profile that I wanted. Repeated this a few times and the SyncMaster appeared to be good.
Now I tried the same with the Macbook. Fine, deleted a few profiles but something now messed up the SyncMaster. It colors, including the dock, contorted to an ugly mess. Cursor changed to a spinning wheel, and I could not click or select anything either on the SyncMaster or the Mac. Rebooted, pulling the Syncmaster adapter out of the mac. Everything good, until I plug the Syncmaster back in, and I am back to the spinning wheel.
There must be some way to uninstall, re-install the Syncmaster?
How can I resolve this?
Any help would be much appreciated. Thank you.

Aha, all is good.
I went to Library/ColorSync/Profiles/Displays
and to home/Library/ColorSync/Profiles/Displays
and deleted all SyncMaster.icc files. I did leave behind one SyncMaster file in the home/../Displays which had an old date and I new was ok.
Rebooted, plugged in SyncMaster, and a new icc file was automatically created in the /Library/../Displays folder.
My display works normally, now.

External monitor for Macbook Pro MC723

Hi, I'd like to get a cheap (<£200) external monitor for my Macbook Pro MC723 ...
1. Can I get any make of monitor or does it have to be an Apple?
2. Which port Macbook Pro port would it connect to?
3. Will I be able to use the monitor as a dual display, along with the macbook's screen?
4. Do you have any recommendations?
Many Thanks.

1. Pretty much any make. Some monitors are MUCH better than others. Generally speaking, you get what you pay for. There may be other monitors as good as Apple's 27" models, but I've never seen one better.
2. The Thunderbolt port.
3. Yes.
4. Apple Thunderbolt display.

HT2494 Using a webcam on an external monitor with macbook pro?

Similar Messages

Maybe you are looking for