HT2498 If I use camera window to download my pictures to my computer, and then I copy and paste the pictures to iPhoto. Would I be ending up having the same pictures in two different files in my computer, and so wasting space in my hard drive?

I recently bought a canon camera. The instructions of the camara recommend to use the canon software (camara window) to download pictures to my computer. I would like to have my pictures in i-photo because it syncs them to my ipad.
I want to download the pictures from my camera to camara window, and then drag and drop the pictures to i-photo. If I keep my pictures in both programs would I be wasting space in my computer hard drive by having the same pictures in two different files?

Yes.
Ignore the Canon software. It gains you nothing and adds complexity. Just use iPhoto for the lot.
Regards
TD

Similar Messages

HT1206 we have only one computer and we are a family of four how do i keep my music apart from my kids music on itunes ? all of us have different id's and passwords but everytime we plug my iphone or their ipod touch we end up having the same apps ,games

how do I keep my music on itunes apart from my kids? everytime I connect my ipod to my computer I end up with a lot of apps and all thier songs on my iphone.

Do you mean you all have different AppleIDs? But, do you also have different user accounts on the computer?
Simplest thing is just give everyone their own user account on the computer - they log into their account and sync their devices from only their account. Keeps everything separate and neat.

HT204053 can i set up two different phones on my computer to use i-tunes ?

Can i set up two different phones with two different ids on my computer to use i-tunes?

You can, and there are different ways to do it : http://support.apple.com/kb/HT1495

I have copied my music library from two different files from extewrnal hard drive into the Itunes folder. I tunes only recognizes some of the songs. I have reloaded 5 times and can't get intunes to recognize all my songs? HELP!

I have copied my music library from two different files from extewrnal hard drive into the Itunes folder. I tunes only recognizes some of the songs. I have reloaded 5 times and can't get intunes to recognize all my songs? HELP!

" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod.

HELP!EXPORTING FROM KEYNOTE TO QUICKTIME AND IT CREATES TWO DIFFERENT FILES

I made a presentation in keynote, adding music from my itunes library and need to send it to a client (who owns a PC) ASAP.
When I export my keynote file to QT, it creates two separate files on my computer. One is the project and one is the "soundtrack.mov"
1. Why does it create two separate files?
2. How can I send the ENTIRE presentation in one?
3. How can I send it to a PC user?
4. Why did it tell me on my last music selection that I added to keynote (After I exported) that I would have to open it in itunes???
Totally NEED HELP ASAP!
Thank you
ML

Yeah, me too. Bump. Can anybody explain this behavior?!?

How to edit footage in the same sequence from two different cameras: 1) Standard Def 4:3 aspect ratio, and 2) Standard Def shot 16:9, anamorphic?

What can I say. We blew the shoot. His high-end Sony camera - std def at 4:3 aspect ratio.
My camera - the little Panasonic DVX100, set to anamorphic, so 16:9 aspect ratio.
I have to edit this footage together in the same sequence. Obviously, I'm getting prompts to change the sequence settings every time I try to move footage onto the timeline.
Alternatively, would someone just thunk me in the head.
I'm sad about this. I can't believe it happened.

What is the ouput - standard 4:3 DV?
If so, put a clip of the 4:3 material into a timeline and accept the offer to conform the timeline to that material. Then, any of the 16:9 material will be part of that settings - however - you will want to go into the DISTORT settings in the Viewer to alter the material so that the image extends beyond the sides (aka a center cut). It has been a long time since I've done this but I remember the number is something like 33 (or -33).
x

How can i use the same id on two different laptops?

When trying to use the same login on two different laptops so that i can connect my nook to either depending on which one is free, i get the error that the id is already in use on another computer?

The issue is embedded in the way the software works. To comply with the
Digital Millenium Copyright Act of 2000, all software companies in this
business keep track of where their software is installed, making
information about the computer and ereaders part of an ID file. So, your
user ID is embedded in the ID file of each computer, but each computer has
a different ID of its own that is also embedded in that file. Adobe's
master server (yes, there is one that you connect to even if you didn't
know it) also has that information, and when you try to use an ID on one
that's embedded in the file of another, Adobe's server blows the whistle,
and as you can see, you can't do that....
==========

Is it possible to use the same Switch for two different clusters.

I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.

user9198027 wrote:
I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.
Yes. Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
My Apple ID

Use two indicators for the same variable in two different VIs

hello, I want to use two indicators for the same variable in two different VIs running at the same time
should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated
I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
what should I do?
thank you in advance
cordialy
Attachments:
projet.zip ‏13 KB

CrisSTine01 wrote:
hello, I want to use two indicators for the same variable in two different VIs running at the same time
I'm a huge fan of User Events to send updates to GUIs from who knows where.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to change two different iCloud account from mac and iPhone?

How to change two different iCloud account from mac and iPhone?

Pick one to use, abandon the other.

How to use same DFF for two different forms with :BLOCK.field reference

Hi,
Can anyone suggest how to use the same dff in two different forms by using :BLOCK.field reference.
Scenario is the same DFF is referenced by two forms, viz. Form-1 & Form-2.
Form-1 Reference Field is :BLOCK.field name, but the same block is not available in Form-2, which throws an error while opening it.
Any pointers please.
Thanks,

In the environment I currently have access to do not have similar setup.
Let say you setup the DFF1 default value to $HEADER.customer_name, the name of the DFF is CUSTOMER_NAME, description can be anything.
In DFF2, default value should be a SQL, where you can reference the DFF1. For example, SELECT DECODE($FLEX.CUSTOMER_NAME, 'ABC', 1, 'DEF', 2, NULL) FROM dual
In this case, you can reference the DFF1.

HT4528 Can I put the same information on two different i-phones with different numbers and different ID's?

Can I put the same information on two different i-phones with different numbers and different ID's?

Yes and no it really depends on what information you are putting on the devices.

How can i have a bookmark in two different files?

How can i have a bookmark in two different files?

You need to make a copy of the bookmark to have it appears more than once.
If you click the star then you modify (edit) the existing copy of the bookmark.
You can also drag the tab or globe/padlock to a bookmarks folder or the Bookmarks Toolbar to create a copy.

Best way to synch two iPhones with two different Outlooks on one computer?

Both my wife and I have iPhones. Currently, only I synch the contacts and calendar with Outlook because I'm scared that my wife's iPhone will overwrite all my data. I haven't even set up her Outlook because I don't know the best way to do this in such a way that would allow us both to synch. Since all our music is under my iTunes, would I have to set her outlook in my login, or could I do it in such a way that she logs in to her user profile (in Vista) and then into her own Outlook profile? If she has a separate user account (in Vista) do I need to set up a separate iTunes and duplicate my music library?

Hey HatoriHanzo,
iTunes will only sync contacts and calendars from the default Outlook profile. So if you make her profile the default profile before syncing it will only sync contact and calendars from her profile. By switching the default profile you can both use the same user account.
You can also setup iTunes to share the music between multiple user accounts.
http://discussions.apple.com/thread.jspa?threadID=1305281
http://support.apple.com/kb/HT1203
This article also has good information about what can be synced from multiple user acocunts and/or computers.
http://support.apple.com/kb/HT1296
Jason
Message was edited by: Jason L

HT2498 If I use camera window to download my pictures to my computer, and then I copy and paste the pictures to iPhoto. Would I be ending up having the same pictures in two different files in my computer, and so wasting space in my hard drive?

Similar Messages

Maybe you are looking for