HT2506 Can a Mustek scanner work with Mountain Lion?

I'm looking to purchase a large bed scanner for my artwork and the least expensive one is a Mustek. The mix reviews are driving me nuts, some say it works good some say no. Does anyone know for sure?
Thank you

I don't have a Mustek.
There is an Open Source driver that works for some Mustek models:
http://www.ellert.se/twain-sane/

Similar Messages

Why Doesn't My BarCode Scanner Work With Mountain Lion?

I'm running Mac OS X 10.8.4 and I have two brand new CipherLab 1500 barcode scanners. When I plug the scanners into a PC, they work fine. When I plug them into either of my iMacs the scanner light comes on when I pull the trigger, but when I point the scanner at a barcode, the light goes out, there is no "beep" to indicate a successful scan, and not data is displyed (I'm testing it with TextEdit). The light will not come back on when I pull the trigger again. I've spoken with CipherLab and they say there's nothing wrong woth the scanners (and I tend to believe them) and that the reason the light doesn't come on when I pull the trigger after attempting to scan a barcode is because the scanner's waiting for a reply from the computer and won't re-scan until it receives one. CipherLab also says they've tested their scanners on OS X (the tech I spoke with didn't know what version they've tested them up to) and they "work fine."
Any thoughts?

Check http://support.apple.com/kb/HT3669 Printer and scanner software available for download to determine if you need drivers and also try the solutions mentioned KB Articles: http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system and http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer which should work w/scanners too.

Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

I was out of town for a few days. I had no issue installing the driver on Mountain Lion (10.8.2). What specifically happens when you try to install?
If you get this message:
then you need to right-click on the installer package and select 'Open' when you get this message:
If this isn't your issue you need to be more specific about what is happening.

Appleworks does not work with mountain Lion. What can I use for drawing and painting?

Appleworks does not work with mountain Lion. What can I use for drawing and painting?
MacBook
Marian

Please see this article which examines various possible alternatives to AppleWorks:
http://rfwilmut.net/aw

HT1218 How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

Hi guys, recently had the same issue. You require an older version of Airport Utility to configure the older Airport Express. It can be found here.
http://www.google.com/url?sa=t&rct=j&q=airport%20utility%205.6%20for%20lion&sour ce=web&cd=1&ved=0CFMQFjAA&url=http%3A%2F%2Fsupport.apple.com%2Fkb%2FDL1482&ei=Ip MBUPLwLoq42wW4puXMBA&usg=AFQjCNGOFUPMM0ZjsKeyj5CcL2oe9Eaf7A

Can anyone recommend a Multi-function black and white laser printer for that works with Mountain Lion? The MFP can be either 3-in-1 or 4-in-1 i.e with fax

can anyone recommend a Multi-function black and white laser printer for that works with Mountain Lion?
The MFP can be either 3-in-1 or 4-in-1 i.e with fax

I bought an epson xp650 a couple of months ago and cannot fault it. It does everything I require and it is the wifi model so I can print directly from my ipad/iphone. Not sure if you are asking about the colour of the unit or just to be able to print black and white, Obviously all printers will print black and white but just to give you a little more info the printer I bought is the white version and it looks really nice sat next to my imac 27''
Hope this helps.

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

First, you cannot do this if you have a Boot Camp partition.
Second: Create a new partition.
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Third: Install Snow Leopard.
Boot from your Snow Leopard DVD. Follow instructions for installation being sure that before you actually install Snow Leopard you have selected the new partition as your target destination.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.

Why does snaps pro not work with mountain lion?

I spent a lot money purchasing the pro addition only to be told that it won't work with mountain lion due to Apple's written something into the code that does not permit me to make videos with it. I even tried ot make a video of Indesign acting up so i could send it to Adobe support and it wouldn't allow me to. Is this the resaon it suddenly doesn't work anymore? Are there plans to fix mountian lion to allow me to use my software? Alternatively,, does Apple have something that does screen captures of videos?

this is the repsonse form Ambrosia: (Not sure I understand it)
As far as Snapz Pro X 2 functionality, some major backend Digital Rights Management changes enacted by Apple may be what is preventing you from recording movies you were previously able to record using our software. Basically, our program can no longer access videos before the DRM protections are enabled, unfortunately we have no control over these changes. Please see the following FAQ:http://www.ambrosiasw.com/support/faqs/products/snapz-pro-x /Why-does-the-content-of-my-capture-display-as-a-checkerboard
BTW I am current on the latgest version.
Does anybody know how to work around my problem? I need to be able to record videos on my computer.

HT1338 preview does not work with mountain lion

I updated my mid 2011 mac mini to mountian lion and i find Preview and all of MS Office 2011 for MAC fails to work
I can cut and paset the logs, but lets astart with assessing whagt does not work with Mountain Lion.

Your profile lists a 2008 MacBook with Snow Leopard.
I installed Windows XP into Bootcamp on my 2009 MacBook Pro (either in Leopard or Snow Leopard, I do not remember which) and I used it with Parallels 6.
When I upgraded it to Lion, even though the Lion Bootcamp will NOT install Windows XP, my Bootcamp (and use by Parallels 7) survived the upgrade.
It may be possible that it will also survive and operate a future upgrade to Mountain Lion.

I bought my macbookpro in may 2007, will it work with Mountain Lion? Hardware Overview: Model Name: MacBook Pro Model Identifier: MacBookPro2,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.33 GHz Serial Number (system):

I bought my macbookpro in may 2007, will it work with Mountain Lion? Model Name: MacBook Pro Model Identifier: MacBookPro2,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.33 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache: 4 MB Memory: 3 GB Bus Speed: 667 MHz Serial Number (system): W872******

Apple states that (of the MBP lines) it has to be from Mid/Late 2007 or later. yours seems to be right on the line.
Apple says
If you are running Lion, you can find out if your current Mac qualifies by clicking the Apple icon at the top left of your screen, choosing About This Mac, then clicking More Info.
you must also have the latest version of Snow Leapord or Lion

HT1284 Does time machine work with Mountain Lion?

I had time machine set-up on my old iMac and had everything copied over to my new iMac. Time machine isn't working. I can't get it to recongize my external hard drive to back it up. Does time machine not work with mountain lion?

Have you plugged the external drive to a different USB port? Also, I would suggest you reset the PRAM. If you still have the issue after you have done all this, it may be an issue with your external drive. Try testing it on another computer.
HT1379 About NVRAM and PRAM - http://support.apple.com/kb/HT1379.

Apple remote no longer works with mountain lion

The apple remote that was quite happily working with Lion no longer seems to be working with mountain lion.
I've checked with at least 3 other apple remotes I have and none of them seem to want to pair.
I've been able to pair them with another mac running Lion, but when going to the pair option under;
Preferences--> Security& Privacy --> General --> Advanced -> Pair
Pressing the menu and next for more than a minute gives me nothing on any of the remotes.
Anyone else having issues pairing with mountain lion?
*Note, each of the remotes quite happily will

I thought I had a problem pairing my aluminium Apple remote with EyeTV, but all turned out fine.
When I clicked Preferences --> Security & Privacy --> General --> Advanced --> Pair a message told to press the "Menu and Next" buttons until the remote paired with the computer. At first, I assumed this meant that I should press the two black buttons underneath the main, circular control, but nothing happened.
Then it struck me that the "Next" button might mean the right arrow on the main, circular control, so I held down this while holding the Menu button (the smaller button, below and to the left of the main, circular control), and the remote paired within a few seconds!
I don't have one of the older, white Apple remote controls to test this idea with, but something similar may also work with that remote.

Will my Photoshop CS3 V. 10.0 work with Mountain Lion please?

Will my Photoshop CS3 V. 10.0 work with Mountain Lion please?
Thanks.

See this blog post:
http://blogs.adobe.com/jnack/2012/07/adobe-cs-apps-mountain-lion-no-known-issues.html
-Noel

Will MS office 97 work with mountain lion

My airbooks system is snow leopard, if I upgrade to lion or mountain lion, will MS office 97 files continue to work & open?

davezebra wrote:
Sorry I meant MS office 2008 for MAC, not 97
Ms Office 2008 works with Mountain Lion - I have a late 08 Macbook Uni with Mountain Lion and Office 2008. Just make sure your Office 2008 has the latest updates.
good luck

HT200160 This solution does not seem to work when I upgraded from OS X 10.6 to OS X 10.8 (Mountain Lion). I've tried all versions of this. Any suggestions specific to getting this to work with Mountain Lion?

Any suggestions for making this work with Mountain Lion? I've tried all similar solutions on web. I've been able to get this to work with Lion, and after upgrading to Mountain Lion it seems to hold true (doesn't make me implement again). But when I went from OSX 10.6 to Mountain Lion and have to implement it on 10.8 - it isn't working. Thanks.

Any suggestions for making this work with Mountain Lion? I've tried all similar solutions on web. I've been able to get this to work with Lion, and after upgrading to Mountain Lion it seems to hold true (doesn't make me implement again). But when I went from OSX 10.6 to Mountain Lion and have to implement it on 10.8 - it isn't working. Thanks.

HT2506 Can a Mustek scanner work with Mountain Lion?

Similar Messages

Maybe you are looking for