HT2506 I am trying to convert  word document to a PDF but only half the document accurately converts. Is there a way to fix this?

I am trying to convert  word document to a PDF but only half the document accurately converts. Is there a way to fix this?

I have found that complicated document structures causes Word to split the document into parts, but I've always gotten the whole thing, in multiple documents.
However, with two pages, I can't imagine it is that complicated.
Any odd fonts or paragraph styles?

Similar Messages

  • I was trying to clean up my desktop, and inadvertently switched all my icons on my desktop. When I click on file a, file b opens and so on, regardless of the extension type. Is there any way to fix this?

    I was trying to clean up my desktop, and inadvertently switched all my icons on my desktop. When I click on file a, file b opens and so on, regardless of the extension type. Is there any way to fix this?

    I use
    Chronosync (http://www.econtechnologies.com/pages/cs/chrono_overview.html)
    and
    Dropbox (https://www.dropbox.com/)
    Both work very well. The former I use for manual, one-way synchroniziation of (nearly) entire systems. The latter for automatic syncing of very active directories through local and shared online storage.

  • Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz  The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:  Is there any way of fixing this? I've tried

    Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
    The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
    Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
    Question 2 (related):
    This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
    Thanks for reading this.
    el7

    Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
    If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
    -USB-to-VGA
    http://www.cablestogo.com/product/30545
    -Convert s-video or composite video signals to high resolution VGA
    http://www.cablestogo.com/product/40971
    The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
    el7

  • I dropped in 2 photos as a side by side (a before and after shot) in Pages.  I went to upload it on a website, but said: not an allowed file type.  I converted it to a pdf, but that didn't work either. Is there a way to convertPages doc to a jpeg?

    I dropped 2 photos side by side (before and after shot) in Pages.
    When I went to upload the photos on a website, message said
    "Not an allowed file type".   I then converted the Pages document into a PDF,
    but that didn't work either.  Is there a way to convert it to a JPEG?  I didn't see
    that as an option on scroll bar.

    Hi iris117,
    Welcome to the Support Communities!
    One thing you can do if you can't just upload the photos individually, is to take a screen shot of your Pages document.  Here's how:
    OS X Mavericks: Take pictures of the screen
    http://support.apple.com/kb/PH14212
    Cheers,
    - Judy

  • I lost the ability to use wifi after the 8.02 update.  Is there a way to fix this?  I've already tried resetting network.  Turned the phone off and on. Nothing is working and now I have to run on just data.

    I lost the ability to use wifi after the 8.02 update.  Is there a way to fix this?  I've already tried resetting network.  Turned the phone off and on. Nothing is working and now I have to run on just data.

        csdwarf,
    So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • I am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

    i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • I am trying to watch Prof. Susskind's video lectures from Stanford univ.U-tube lec work fine.With itunes video and audio have synch problem.Is there a way to fix this or the people who uploaded messed up and it is too late?

    I am trying to watch Prof. Susskind's lectures from Stanford Univ. U-tube lectures work fine.With I-tunes, there is a synchronization problem between audio and video. Is there a way to fix this or the people who uploaded messed up and it is too late?

    I had thought this situation was solved but it just got worse. In addition to being without service for several days I am now being charged  a cancellation fee for a broadband service that BT disconnected in error. BT Vision was also terminated by BT but the set up charges are still in place. Does anyone know who the relevant Ombudsman is? I called BT from America on Friday - for an hour - while someone called Aruj sorted out why there is an order 'in progress' that I didn't initiate; why I have fees relating to a problem created by BT and why there are references to a house move that didn't take place and a BT Vision service I no longer have but didn't cancel myself. He assured me it would be rectified and my bill would be reduced by 139 pounds and we would get confirmation of this later that day. I asked him what chance there was that this would not actually happen - he said no chance at all; my new bill would be 23.50.
    There was no text message. An online chat person today told me there had been a fee reduction request which had been declined and there was nothing else he could help me with as he dealt only with broadband. But he would get BT Vision to email me. They always seem so helpful.............
    I'm sure I'm listed somewhere as 'a problem', there's no other explanation for why I get the runaround

  • I am trying to update an ipod version 2.2 with itunes but I keep getting an error (-1).  Is this an hardware issue according to Apple and if so is there any way to fix this.?

    I am trying to update an ipod version 2.2 with itunes but I keep getting an error (-1).  Is this an hardware issue according to Apple and if so is there any way to fix this.?

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    If you disabled yuor computer's security software then that indicates a hardware problem,
    I would say it is not workth fixint your old. likely a 1G. iPOd.

  • When I convert my file to excel it cuts off the first two columns, is there a way to fix that??

    When I convert my file to excel it cuts off the first two columns, is there a way to fix that??

    Hey Diann,
    Please let me know whether you are using Adobe Reader or signed up at "https://cloud.acrobat.com/"
    If you are using Adobe Reader, then try converting the file online and vice-versa.
    Let me know.
    Regards,
    Anubha

  • I've lost the icons associated with my bookmarks. I've tried restarting my Mac, reinstalling Safari, and the add-ons suggested in other forums without any success. Is there a way to fix this issue?

    I've lost the icons associated with my bookmarks. I've tried restarting my Mac, reinstalling Safari, and the add-ons suggested in other forums without any success. Is there a way to fix this issue?

    Hi rmmilleriii,
    You should take a look at [https://support.mozilla.org/kb/latest-firefox-issues#os=mac&browser=fx9 this article] that discusses some of the issues with the latest build of Firefox.
    There is some information in there that should help you to resolve your issue. Luckily, it is a very easy fix.
    Hopefully this helps!

  • I've just recently tried snapchat but it won't recognise my phone number on the ipad , is there any way to fix this ?

    II've tried putting in my number on the snapchat app however it says its invalid  is this because I'm using an iPhone app on an ipad ? I've never had issues with this before and it says its compatible with ipad :/ . Is there any way of fixing this as without your number you are unable to use the app
    thanks
    Lauren x

    Did you choose the right router to connect to in settings, wifi?  Is there a password you need to enter (or did you already try)?  Just because there's a signal doesn't mean it's connected to the router.  I'm not sure what you mean by "service".

  • HT201210 i tried installing ios 6 on my new ipad but when i try to change it to ios 6 it say that it cant be restored because the firmware file is not compatible. Is there any way to fix this problem

    i tried installing ios 6 on my new ipad but when i try to change it to ios 6 it says that the firmware file is not compatile. Is there any way to fix this problem?

    Sorry to be the bearer of bad news.
    Only developers have legal access to iOS 6 right now, if you really, really wanted it you could sign on as a developer for $99.
    http://developer.apple.com

  • Airport time capsule 2 TB. All is connected and Wi-Fi is working but light still flashes amber rather than solid green. I have tried to reset but this still happens. Is there a way to fix this or do I need to?

    Airport time capsule 2 TB. All is connected and Wi-Fi is working but light still flashes amber rather than solid green. I have tried to reset but this still happens. Is there a way to fix this or do I need to?

    You want to see a green light on the Time Capsule.
    Once you have set up the Time Capsule initially, a flashing amber light indicates that the Time Capsule has a message for you....possibly about a network condition or notice of an update that is available.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the amber dot and another window will appear to provide the current status....along with suggested actions to remedy the flashing amber light.

  • My password only works to log into the computer, but not to make admin changes, even though I am the admin account on the computer.  This happened after I tried to change the computer's name. Is there any way to fix this?

    Bought my laptop off my room mate and he had master reset it to default.  This still left his name as the computer name and I wanted to change that.  Tried to rename it under the advanced changes section, and now it isn't recognizing my password for anything more than logging in.  I can't unlock the settings to make further changes (or change it back).  I have had my room mate try all of his old passwords and usernames, to no avail.  Is there a way to reset this?  It's also not letting me wipe the drive and start fresh again because, alas, I don't have access without the password.  Any advice would be very helpful.  Thank you!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Making video a word document stills ('09) - is there a way?

    I am needing to turn some footage into a word doc based series of frames for a reader - not a viewer. Somewhat akin to a comic strip -showing every 3-5 seconds of the video on a paper-based series of frames.
    Anyone have any tips for me on how to do this? All I can figure out is to take a 'command-shift-4' to take a freezefame - but this is too pixelated.
    Help appreciated.
    Thanks

    mpressive!
    jdavisharte wrote:...  as I'm a mom of young kid and need to get this PhD zipping along ! <shrugs>)
    Impressive! For me, raising kids was a fulltime job .. meanwhile, son is 14y, he raises me
    https://www.google.de/search?q=word+templates+storyboard&newwindow=1&client=fire fox-a&hs=8Hh&rls=org.mozilla:de:official&channel=sb&tbm=isch&tbo=u&source=univ&s a=X&ei=4Hg-U7rMBc_csgaYmIHwDA&ved=0CDMQsAQ&biw=1280&bih=852
    shows pictures of several 'Word templates/Storyboard' ,....
    which probably fit your needs - many are 'free' available..
    It really depends on sheer numbers:
    to place/resize a dozen stills, I would do that manually. For 'hundreds' I would search for templates. MSWord wouldn't be my first choice, a mighty tool, no doubt, but for 'layout' far from perfect.
    Tools like Pages come with 'dropzones', more handy, imho, have a look here:
    http://youtu.be/Jppdr61n2C8
    When done, you can export and 'add' the pages to your Word document... or, export pdfs from Pages and Word and combine the pdfs with Preview.app (very lil' known feature of this small-looking but mighty app) to your final delivery document.
    sorry of being no better help - storyboarding is a bit off my main competences...
    .. and to be honest:
    Your thread-ttile really cought my attention .. "video to word" sounded sooo weird to me
    But now I understand, it's basically about 'storyboarding'
    fingers crossed for your project!

Maybe you are looking for