HT2506 I get this error message come up when I try to save a pic in Preview??

"This file could not be opened in Preview because you do not have permission to view it. "

some thing to check, drag the photo in question to the desktop (it makes a copy) highlight it the press
COMMAND I
This will bring up the info window on it. CHeck the bottom under sharing and permissions and your name or admin and see if it has read&write permissions, if not you may have to enter your admin password to unlock the padlock and change ti to read& write. Also more towards the top make sure the box "locked" is not checked
Hope this helps

Similar Messages

  • I get an error message in itunes when I try and save my security question answers.  This is stopping me from downloading music.  What could be the problem?

    I try and buy a song in itunes.  But, It keeps taking me to the security questions in which it won't accept.  Thanks

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • Perameter incorrect error message comes up when I try to get photo

    I was using the 3.2 free edition version. It was working WONDERFUL! It is the best program for me. But today, when I went to load my pictures I got this error message "the parameter is incorrect". To get photos I was using a sandisk card reader. I usually just plug the card into the reader and the adobe photoshop album starter 3.2 usually pops up on its own, then I just click get photos. It sooo easy. But today that didn't happen. So I manually opened the program, then went to file, get photo, from reader, and then I see the number of pictures read, but then the error message comes up.
    Anyone know what that message means and how do I fix it?
    Thanks in advance for any help.

    Hi Penny,
    Reinstalling the program should not be a problem as this is available online for free download. Just search for "Download Photoshop Album Starter Edition" and you will be lead to appropriate link on the  Adobe site.
    Cheers!!

  • I have just "gone" digital with a new Nikon D610, but I get an error message (model unknown) when I try to open a file in PS.  What do I need to do?

    I've done an "update" with Adobe, but still get the error message about my model not being supported.  What do you advise?  Thanks.

    Since support for your camera was added in Camera Raw 8.3, there is no version of Camera Raw for your version of Photoshop that will enable you to open the NEF files from your camera. One alternative would be for you to download the DNG converter version 8.5, and use it to create digital negative copies of your NEF files. They will still have the raw image data in them, but they will be in a format that your version of Camera Raw can work with. Another alternative would be for you to add Lightroom to your workflow. You would still be able to send copies of your NEF files to Photoshop when needed. The other alternative would be for you to join the creative cloud an upgrade to Photoshop CC. There is a package that includes Photoshop and Lightroom for the monthly subscription price of $9.99 in the US. I think Photoshop CS6 can still be purchased separately as a standalone product. And there is a version of Camera Raw for that version of Photoshop that will enable you to open your NEF files.
    While you are trying to decide which way you want to go, you might consider using the DNG converter as an interim solution. It's free, you'll still have your original NEF files, and you'll be able to start working with your raw image data today. Here is the link:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.5

  • Why does an error message come up when I try to download an app

    I have about 10 apps I am trying to update but everytime I click the app to get it to start loading a message comes up saying that the app could not be downloaded at this time. I don't know what to do because I can't use the 10 apps until I can get them to update. If you could plz help me I would appreciate it so much thanks.

    Close All Open Apps...  Sign Out of your account... Perform a Reset... Try again... This time try doing the Updates One at a Time...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I get the error message "unresponsive script" when I try to open Firefox, and then I can only delete the message by going to Task Manager.

    After I downloaded the Firefox update, when I tried to open Firefox I got the error message: "Warning unresponsive script...etc". This happens every time and the choices in the message ("continue" etc) are unresponsive. Further I can't delete the error window without going to Task Manager to end the program. The problem also disabled Internet Explorer which will now simply not load. Google Chrome is working. I assume it relates to the update since the problems (for both Firefox and IE) occurred immediately after the download.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • I get a error message (no -42404) when i try to update

    when i try to update itunes i get error message   (-42404) saying my copy of itunes is corrupt  & and reinstall  it
    but i keep getting same message???

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • When I upgraded to latest version of Firefox this error message comes up everytime I try to open it: "Type Error:Components, classes [cid] is undefined" How can I get this taken care of, what is it?

    There are no other details.

    https://support.mozilla.com/en-US/questions/729606
    https://support.mozilla.com/en-US/questions/672099
    thank you

  • There was a problem connecting to the server. This error message comes continuously when running final cut pro x

    I used to have a nas connected to my mac, i mounted it with AFP. Added some music to my movies from that location but all downloaded to my local mac. There is nothing on the nas that is required in my movie, still i get the message continously popping up. How can i find out the reason it is constantly popping up?
    With this it is impossible to use final cut for any editing, not cause i need data from the device but cause this popup comes up very annoyingly ever 10 sec or so.
    The movies i have all playes fine in final cut, even though i have this pop up every 10 sec.
    I cannot reconnect the nas as it is dead :-)
    Many thanks to anyone that can advice me how to get rid of this very anoying pop up.
    Thanks
    Marcus

    Sounds like there is some Alias files pointing to the NAS in your Events library.
    If you have any idea about what songs it was, hunt them down and replace them with songs from the local drive.

  • Keep getting this error message about inbox when opening Thunderbird

    current operation of Thunderbird did not succeed. The mail server....... ( then message cuts off)

    At this point I think you should get Applejack...
    http://sourceforge.net/projects/applejack/
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
    Do not try to run in Terminal from the GUI.

  • I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

    I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

    Hi Brizill,
    Please refer to the help document below to understand the technical specifications for the same:
    System requirements | Photoshop
    Regards,
    Sheena

  • HT1926 when i try to install update i get this error message  the feature you are trying to use is on a network resource that is unavailable   any ideas

    every time i try to update itunes i get this error message    The feature you are trying to use is on a network resource that is unavailable    then asks me to find the folder containing the instalation package ITunes.msi

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Just updated to IOS 7 and two issues:  First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

    Just updated to IOS 7 and two issues: 
    First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".  I'm not sure what this really means...
    The second issue is when I try to select "Manually Manage Music"
         The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC".  Do you want to erase this iPhone and sync with this iTunes library?  An iPhone can be synced with only one iTunes library at a time.  Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
    So... I don't want to do that, but I do what to be able to Manage my music.  I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
    Anyone have any ideas?

    I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

  • HT5290 When I try to update software such as pages, etc. this error message comes up:  There was an error in the App Store. Please try again later. (20)

    When trying to download updates for Pages etc, I get this error message:  There was an error in the App Store. Please try again later. (20)

    Hello almauck,
    Thank you for the details of the issue you are experiencing when trying to update Pages on my iMac.
    I recommend signing out of the App Store and signing back in and then trying the update again:
    Sign out
    Choose Store > Sign Out.
    Sign in using an Apple ID
    Choose Store > Sign In, or click Sign In in the Quick Links section. The Quick Links section is located in the right part of the window shown when you click Featured, Top Charts, or Categories in the toolbar.
    Enter your Apple ID and password, and then click Sign In.
    Mac App Store: Sign in and out
    http://support.apple.com/kb/PH11499
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message:  Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

    I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message:  Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

    Julian,
    Pages simply won't support a table with that many rows. If you need that many, you must use another application.
    Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
    There are probably other ways, but that's what comes to mind here.
    Jerry

Maybe you are looking for