HT2508 how to use my ipad with my mac book pro
trying to interface with iPad using my MacBook pro. Having issues
Mirrioring ??
iOS: How to use AirPlay Mirroring
Troubleshooting AirPlay and AirPlay Mirroring
Similar Messages
-
If i use dell projector with my mac book pro the imagen is darkness
when i use projector del with my mac book pro the images and fotos is darknnes
what happen
is my mac or compatibilityHi cachirulotraumatologo,
If you are having issues with the image quality when using your projector as an external display for your MacBook Pro, you may find the troubleshooting steps outlined in the following article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden -
HT1338 can I use epson 2880 with my mac book pro? 10.9.2
can I use epson 2880 with my mac book pro? 10.9.2
Epson names their printers (in addition to numbers). What is your printer designation?
http://support.apple.com/kb/HT3669#epson
Barry -
HT204291 are you able to use airplay mirroring with my mac book pro?
are you able to use airplay mirroring with my mac book pro?
The Mac needs to be recent (2011 or later) and running Mountain Lion.
-
How to use micromax dongle mmx355g in mac book pro
how to use micromax dongle mmx355g in mac book pro
Who is your Internet service provider? Contact their technical staff for assistance.
Ciao. -
How do I start over with my mac book pro
I used disk utility and found my hard drive to be corrupt. How do I start over and clean this up?
Backup your Users data off the computer to regular storage drive (not TimeMachine), hold c boot off the 10.6 and use Disk Utility to Erase with Zero the entire drive of everything, this will map off any bad sectors and if you have enough spares, the drive shoudl work fine again.
Reinstall OS X, setup with the same user name, Software Update until clear, install your programs from fresh sources and return files from the storage drive, don't use TM to restore it's also corrupted image, just have to start all over again.
Read more, especially the section about bad sectors
https://discussions.apple.com/docs/DOC-3044
https://discussions.apple.com/docs/DOC-3045
https://discussions.apple.com/docs/DOC-3046
https://discussions.apple.com/docs/DOC-3172
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
How to turn on cookies with my mac Book Pro
How do I turn on cookies. My browser is Safari
Safari > Preferences > Security
Try one of the options other than "Always block". -
I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
ThanxI can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx -
I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
ThanxI can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx -
I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?
First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R. -
ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
How can restore my ipad with my mac even though I first reset it with another computer
how can restore my ipad with my mac even though I first reset it with another computer
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Unable to restore from backup of a newer device
http://support.apple.com/kb/ts3682
Cheers, Tom -
Why do I need to connect my Ipad mini with my Mac Book Pro via iCloud?
Why do I need to connect my Ipad mini with my Mac Book Pro via iCloud? I don't have iCloud on my MacBook Pro and only intend to use the mini to check e-mail and use Garage Band and Photo Booth for song writing when traveling . . .
Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody -
I need OS 10.7 to sync my new iPhone 5 and new iPad 4 with my Mac Book Pro, but my MBPro has 10.5.8? What do I do? I want to fix my problem now, but it wants me to purchase the Snow Leopard software and wait for it to be delivered. Why can't I purchase it and then download? Any ideas?
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?
The battery is fully charged so it is not the problem.
What happens when you use the MagSafe?
Maybe you are looking for
-
How to embed a music video in facebook, how to embed a music video in facebook
I just want to share an iTunes music video on facebook.
-
Project Server Online: all resources disappeared
Hello, I'm testing Project On line. I worked on it during several weeks without any issue, but today the Resource Center is empty: instead of the resource names I have the message: To add resources, please click here to sync with an existing group. W
-
Unable to determine the sharedness of /dev/sde
Hi Good People, I'm having this error when I ran ./runcluvfy.sh and it started when I installed cvuqdisk: WARNING: Unable to determine the sharedness of /dev/sde on nodes: linux2,linux2,linux2,linux2,linux1,linux1,linux1,linux1Can anyone please
-
I am trying to upgrade to mountain lion server from lion server. When i try an download the latest version of OXS from the app store, i get an message that Server can't be installed on "my HD" because Mac OS X version 10.8 or later is required. I hav
-
Date Format ignored after disconnect/reconnect
I don't know if anybody else gets this, or if it has already been posted, but I didn't see anything from my quick search... I'm connecting to a database that is shut down for a scheduled backup. When it becomes available, I "reconnect" sql developer