HT2513 how to you do two advents at the same time

when i try to do two one dissapears.

Rick is correct. You can use the Rollover Slidelet's rollover area to trigger an Advanced Action. You'll need to create this Advanced Action with two clauses. One to SHOW the caption, and the other to SHOW the rectangle.
Your alternative to the rollover slidelet is to use an Event Handler widget attached to the object that the mouse should roll over.
The Event Handler will detect when the mouse is over the object and trigger its own Success criteria. You can then use the widget's ON Success event to trigger the Advanced Action as mentioned above.
More information about using the Event Handler here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
An example of using it to do two different things on the same object can be found at this web page: http://www.infosemantics.com.au/adobe-captivate-advanced-elearning-tutorials/beat-adobe-ca ptivate-interactive-catch22
Trial versions of the widget can be downloaded from here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

Similar Messages

How can I open two libraries at the same time on itunes?

Hey i need help on opening two libraries at the same time on itunes. I don't know if that is possible but need some advice if its possible. I already have several libaries but I need to compare labaries at times due to various users on my computer. Please help .

Not that I'm aware of. What exactly is that you want to achieve? There are tools for scanning media folders and adding any files not listed in the library, or deleting those that no longer exist. There are also ways to use one library for multiple users so that any tag update gets applied for everyone.
tt2

How can I start two Vi at the same time?

I have two Vi's, each of these Vi has a stop button. I want to start these two Vis at the same time. I also want to be able to stop the two Vis at the same time. What should I do? Thanks.

One way to start them is with an Invoke Node and the Run method. You can then stop them with the Set Control Value [Variant] method. When you use the Set Control Value [Variant], you just have to specify the name of the front panel control that stops the while loop. Older versions of LabVIEW only had the Set Control Value method in which you had to use the flatten to string function to pass the Type Descriptor and Flattened Data.
Message Edited by Dennis Knutson on 03-20-200609:35 AM
Attachments:
Run Method.JPG ‏44 KB

How to make this two things at the same time ?

Hello
When my mouse is on a area, I need :
- to show a object (a rectangle inserted with the toolbar)
- to show a caption
I think it's not possible to do this two things at the same time when I use the rollover functions (Rollover caption or Rollover Image).
I would like to use a button, but the button works only if I click it, and not when I just pass my mouse on it.
Someone have an Idea?
I can't use Javascript.
Thanks

Rick is correct. You can use the Rollover Slidelet's rollover area to trigger an Advanced Action. You'll need to create this Advanced Action with two clauses. One to SHOW the caption, and the other to SHOW the rectangle.
Your alternative to the rollover slidelet is to use an Event Handler widget attached to the object that the mouse should roll over.
The Event Handler will detect when the mouse is over the object and trigger its own Success criteria. You can then use the widget's ON Success event to trigger the Advanced Action as mentioned above.
More information about using the Event Handler here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
An example of using it to do two different things on the same object can be found at this web page: http://www.infosemantics.com.au/adobe-captivate-advanced-elearning-tutorials/beat-adobe-ca ptivate-interactive-catch22
Trial versions of the widget can be downloaded from here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

How do you sync two Ipods to the same MacBook?

Have a nano already synced to my MacBook. Want to also sync my 5th gen 30GB Ipod to the same MacBook. Have only had my MB for 3 months after 18 years of PC platform (yes I'm drinking the KoolAid baby.) This notebook is fantastic.
An issue I had with my old PC was that you couldn't sync two Ipods to the same PC unless you held down the shift key while accessing ITunes to select a library - or something like that.
Please tell me that if I plug my 5th gen into this MacBook it won't overwrite my nano songs/info that are already on this MacBook? Apple has to have done it easier than how I had to do it with the PC. Any help from you experts out there will save me a ton of grief..........Thanks! R.Ty

Thanks!
No problem.
My issue is however that in addition to all of the songs that I have purchased via ITunes, I have about 600 songs from my own CD's on the 5th Gen that if I restore will be gone. Time - yes....money - a little.... It would be great if I could de-authorize the PC it was synced to and now work off my mac....
In that case, check out these different media recovery options by Zevoneer for copying music from your iPod to your computer.
http://discussions.apple.com/thread.jspa?threadID=1900086&tstart=0
And check out this older post of mine on different ways to copy music to your computer from your iPod as well.
http://discussions.apple.com/message.jspa?messageID=12000345#12000345
What you need to do is first copy all the music currently on your 5th generation iPod to your new Macbook. Once you have done that, you are free to *Erase and Sync* it upon plugging it in, or restoring it via iTunes as described above.
And if you are adding purchased music, you will need to authorize your computer if you haven't done so yet. To do this, choose Authorize from the Store drop down menu in iTunes.
B-rock

How can I use two ports in the same time?

My application need one pc use two ports the same time.But when I open one port and my systerm is running the other port can't be opened.
I use the frame API in VC++6.0.
My OS is win2000 server;
The functions I used are ncOpenObject();

Hi DickW
Thank you for your help!
I have tried the example.But the example shows how to connect one CAN network with two ports.
I want each port connect to the net can both read and write;
I want to apply the function like this:
1.config the port1 and port2
2,open port1 and port2
But after I open port1 or port2 the other port can't be opened;
After I open the second port it always returns negative.
In the codes I use CAN0 and CAN1 as the CAN objects.
Attachments:
twoport.zip ‏1184 KB

How do you rename multiple files at the same time

how do you rename multiple photo files with a name at the same time?

This would be an excellent use of Automator. Here is a link to some instructions on how to do this using Automator.
http://www.youtube.com/watch?v=Ie6zGxo2D-o
If you don't like that then Google "Renmame multiple files Automator" and you will find many tutorials available.

How do I open two profiles at the same time?

until i updated to Firefox 7 i got prompted to which profile i want to open every time i open firefox, i am using one profile to play and one for work. i get prompted the first time but not the rest of the time how do i fix it so that i can again run two profiles at the same time

See:
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

How can I view two emails at the same time

Is it possible to view two mail messages at the same time. We are testing iPads at work and this is the biggest problem

You cannot view 2 emails at the same time on an iPad. This is not a supported feature.

How to read from two boards at the same time

I have two NI DAQ Boards, a PCI 6034E and a PCI 6025E I want to make one a master and one a slave and read from both at the same time. Do they need jumpers between them
from one board to the other or does the motherboard bus take care of that? I can find software to handle this but I can't find anything on the way the hardware should be configured, is there a cable I need between them?

Hi,
We have a couple of great tutorials on this:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6DC991028566309886256F990080A720
http://zone.ni.com/devzone/conceptd.nsf/webmain/2638A8DA4E4CFD1F86256D250070C093?opendocument
-Sal

How do you sync two iPhones to the same ical?

Hi there,
I am trying to sync my iphone and my husband's iphone to the same ical and I don't know how to? But we want to be able to to see eachothers calenders on our phones!
Thanks!

Use iCloud Calendar:
http://support.apple.com/kb/PH2690

How do i sweep two voltage at the same time by using for loop ?

Hello, Can anyone help me on this topic ?
My problem is to sweep Vds and Vgs as same time vs Id in MOSFET by using for loop. I also use the Agilent power supply source. Let me tell a litle bit about what i'm doing. For different value of Vds, i will get Vgs vs Id curve. (The x axis is Vgs, the y-axis is Id).
I started to create two for-loop, the inner to sweep Vgs, and the outer one to sweep Vds. My problem is don't know how to connect all the wire in the for loop.
In the for loop i saw N, i icon. Suppose I have the two variable for Vgs such as Vgs start and Vgs_stop. Should the Vgs_start( or Vgs_stop) be connected to N or leave it in the for_loop ?
for example: I want to sweep Vgs from 0(for Vgs_start) to 5(Vgs_strop) V, and the step increment is .5V how do i connect these variables in the for loop ?
Thank you for your time
Ti Nguyen

It is easier to use a while loop. Dennis beat me to the punch. Here is my solution:
You can remove the flat sequence structure if you use Error In and Error Out to ensure the execution flow will occur in the proper order. Be sure to include the delay time in the loop so that your vi doesn't hog all the CPU time.
Message Edited by tbob on 10-17-2005 01:00 PM
- tbob
Inventor of the WORM Global
Attachments:
RampVoltage.PNG ‏8 KB

How can I compare two collections at the same time? (View two grid views)

I have two collections containing some of the same images. (My Nikon D70 did not put an end-of-file on some images. I recovered them into a different collection.) Now I want to display both collections side-by-side in grid view. I will select those images in the "recovered" collection that correspond to the bad images in the "main" collection, add the ratings etc, and move just these to another collection.
It is extremely frustrating to have to bounce back and forth between collections, remembering each image one by one and selecting it in the "recovered" collection. (The image names are not preserved in the "recovered" collection -- I have to go by what the image looks like.)
LightRoom allows me to compare photos in the compare view. I want to compare collections in two grid views.

CaptureTheLight,
you have ran into a situation when you have to compare two sets of images and now you're wondering how come Lightroom doesn't have such "obviously necessary" functionality? But you have to admit it, this is not such a common situation in a photographer's workflow recovers broken files and tries to compare them against themselves. I think it's a pretty specific feature you need. Still, Lightroom has enough powerful tools for editing and sorting images.
For example...
You could just put them all - "main" and "recovered" - into a single collection or into the Quick Collection. Label the entire "recovered" collection with, say, red and sort by capture time. Now you'll have everything side by side, ordered chronologically. The "recovered" images will stay next to the "main" images since their capture time will be the same, and they will also stand out since they have the red label.
Make the thumbnails bigger and set up the grid view so it tints the thumbnail cell are tinted with the label color. Now, you can go quickly through them visually checking labeled vs unlabeled.

How do you use two ipods on the same computer?

Okay i got a ipod for christmas and my brother got one for his b-day a few days ago & i already had itunes installed for my ipod now do i have to install it agian or what?
Also my brothers ipod has the picture of the ipod with the ! thing.
HELP?? please?
XP Windows XP Pro

hiya!
Okay i got a ipod for christmas and my brother got one for his b-day a few days ago & i already had itunes installed for my ipod now do i have to install it agian or what?
these resources might be helpful with that:
Natalie Beresford: multiple iPod/iTunes installations
How to use multiple iPods with one computer
iTunes: How to share music between different accounts on a single computer
Also my brothers ipod has the picture of the ipod with the ! thing.
these resources might be helpful with that:
iPod does not appear in iTunes or on the desktop, an exclamation point or sad iPod icon appears onscreen
iPod shows a folder icon with exclamation point when you turn it on
love, b

How do you use two ipods in the same itunes???

My brother recently bought an ipod (15GB) i have been fine using my one (20GB) with my itunes on my computer. When i plug my brothers ipod in to my computer and open itunes i expect the music only about (5GB) to transfer to his ipod instead it just says Do not disconnect like usual, but no music is being transfered. Can anyone help?
Windows XP

Read this article to find out how to set up your computer for multiple iPods.
If you don't want to create a separate user account, you have to set up different playlists to sync with different iPods.
Hope this helps.
M

HT2513 how to you do two advents at the same time

Similar Messages

Maybe you are looking for