HT2513 no days of week except in full screen

In week view, how do I see the days of the week label? I can only see the labels when I am in full screen mode, which won't cut it.

Hello MegDC,
Please open Document Properties dialog box of the PDF (File-> Properties) and select 'Initial View' tab.
Uncheck 'Open in full screen mode' option under Window Options section, save it and then launch Acrobat again.
Regards,
Anubha

Similar Messages

  • Shows address bar etc. but won't show the actual page, except in "full screen"u

    When I launch firefox it only shows address bar etc. but won't show the actual page, except in "full screen" view. My OS is Windows Vista.
    In other words, I get the top menu bars and the rest of the screen show my desktop background.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • OS X Yosemite iPhoto 9.6 won't open except in full screen

    Upgraded to Yosemite, iPhoto 9.6. Mid-2011 iMac. When I open the iPhoto app, I get a top bar and the dot under the icon to indicate that the app is open, but nothing happens. I go to the menu, View, Enter Full Screen. Only then can I see anything in iPhoto. Then I can Exit Full Screen and navigate. But this is a headache and a sill extra couple of steps. Have tried repairing permissions, checked them with the admin module, deleted and reinstalled iPhoto altogether. Still, can't open iPhoto normally. Suggestions?

    EtreCheck version: 2.0.6 (91)
    Report generated October 19, 2014 at 12:20:47 PM PDT
    Hardware Information: ℹ️
      iMac (21.5-inch, Mid 2011) (Verified)
      iMac - model: iMac12,1
      1 2.8 GHz Intel Core i7 CPU: 4-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 0/DIMM1
      4 GB DDR3 1333 MHz ok
      BANK 1/DIMM1
      4 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      AMD Radeon HD 6770M - VRAM: 512 MB
      iMac 1920 x 1080
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:41:20
    Disk Information: ℹ️
      Hitachi HDS723020BLA642 disk1 : (2 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted> : 210 MB
      Macintosh HD 2 (disk1s2) /Volumes/Macintosh HD 2 : 2 TB (1 TB free)
      APPLE SSD TS256C disk0 : (251 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 250.14 GB (60.31 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      OPTIARC DVD RW AD-5690H 
    USB Information: ℹ️
      Western Digital My Passport 0748 2 TB
      S.M.A.R.T. Status: Verified
      EFI (disk3s1) <not mounted> : 210 MB
      My Passport for Mac (disk3s2) /Volumes/My Passport for Mac : 2 TB (2 TB free)
      LaCie P'9233 Desktop Drive 3 TB
      S.M.A.R.T. Status: Verified
      disk4s1 (disk4s1) <not mounted> : 210 MB
      LaCie (disk4s2) /Volumes/LaCie : 3 TB (1 TB free)
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
      Bowers & Wilkins MM-1
      Logitech USB Receiver
      Apple Computer, Inc. IR Receiver
      Apple Internal Memory Card Reader
    Firewire Information: ℹ️
      Seagate GoFlex Pro Mac 800mbit - 800mbit max
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      FreeAgent GoFlex Drive (disk2s2) /Volumes/FreeAgent GoFlex Drive : 999.86 GB (169.04 GB free)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Extensions
      [loaded] com.Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8) Support
      /System/Library/Extensions
      [not loaded] com.Leaf.driver.LeafFwXDriverMatcher (1.2.0d1) Support
      [loaded] com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) Support
      [not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.0) Support
      [not loaded] com.focusrite.driver.usb2audio (1.1) Support
      [not loaded] com.m-audio.driver.firewire (1.10.2) Support
      [not loaded] com.nike.sportwatch (1.0.0) Support
      [not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
      [not loaded] com.wdc.driver.1394HP (1.0.7) Support
      [not loaded] com.wdc.driver.USBHP (1.0.5) Support
      [loaded] rabb.it.driver.RabbitEars (2.1.4 - SDK 10.7) Support
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
    Startup Items: ℹ️
      CoreDuoTemp: Path: /Library/StartupItems/CoreDuoTemp
      M-Audio FireWire Audio Helper: Path: /Library/StartupItems/M-Audio FireWire Audio Helper
      RosettaStoneLtdDaemon: Path: /Library/StartupItems/RosettaStoneLtdDaemon
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.adobe.AdobeCreativeCloud.plist Support
      [not loaded] com.cooliris.SetLaunchArch.plist Support
      [invalid?] com.dimdim.webmeetingplugin.plist Support
      [invalid?] com.flipvideo.FlipShare.AutoRun.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.Logitech.Control Center.Daemon.plist Support
      [invalid?] com.oracle.java.Java-Updater.plist Support
      [running] com.seagate.SeagateStorageGauge.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.dimdim.dimdimupdater.plist Support
      [running] com.fitbit.fitbitd.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.m-audio.firewire.helper.plist Support
      [invalid?] com.oracle.java.Helper-Tool.plist Support
      [invalid?] openbase.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.facebook.videochat.[redacted].plist Support
      [invalid?] com.google.Chrome.framework.plist Support
      [invalid?] com.leadertech.PowerRegister.LGT2.c59807af95d106639fca8f10676ced62.plist Support
      [running] com.micromat.SMSDaemon.plist Support
      [running] ws.agile.1PasswordAgent.plist Support
    User Login Items: ℹ️
      GrowlHelperApp Application (/Users/[redacted]/Library/PreferencePanes/Growl.prefPane/Contents/Resources/Gr owlHelperApp.app)
      GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
      Microsoft Database Daemon UNKNOWN (missing value)
      LMILaunchAgentFixer UNKNOWN (missing value)
      Air Mouse Server UNKNOWN (missing value)
      ChronoSyncBackgrounder UNKNOWN (missing value)
      VMware Fusion Helper UNKNOWN (missing value)
      EvernoteHelper UNKNOWN (missing value)
      Nike+ Connect Helper UNKNOWNHidden (missing value)
      Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
      Dropbox Application (/Applications/Dropbox.app)
      SpyderUtility Application (/Applications/Datacolor/Spyder4Elite/Support/SpyderUtility.app)
      Fantastical Application (/Applications/Fantastical.app)
    Internet Plug-ins: ℹ️
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
      AdobePDFViewer: Version: 9.5.5 Support
      LogMeInSafari32: Version: 1.0.497 Support
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      iPhotoPhotocast: Version: 7.0
      npDimdimControl: Version: 1.01
      RealPlayer Plugin: Version: (null) Support
      Loki: Version: 3.0 Support
      QuickTime Plugin: Version: 7.7.3
      LogMeInSafari64: Version: 1.0.497 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
      GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
      wkDimdimControl: Version: 1.0 Support
      AmazonMP3DownloaderPlugin1017277: Version: Unknown
      DivXBrowserPlugin: Version: 1.4 Support
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
      CoolirisWebKitPlugin: Version: (null) Support
      LogMeIn: Version: 1.0.497 Support
      Google Earth Web Plug-in: Version: 6.0 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
    User Internet Plug-ins: ℹ️
      WebEx: Version: 1.0 Support
    Safari Extensions: ℹ️
      1Password
      Buffer (Disabled)
      Readability (Disabled)
    3rd Party Preference Panes: ℹ️
      3ivx MPEG-4  Support
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      Growl  Support
      iStat menus  Support
      OpenBasePreferences  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Destinations:
      LaCie [Local]
      Total size: 3 TB
      Total number of backups: 111
      Oldest backup: 2012-10-15 17:02:40 +0000
      Last backup: 2014-10-19 19:13:08 +0000
      Size of backup disk: Excellent
      Backup size 3 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          12% Google Chrome
          11% mds
          6% SMSDaemon
          5% WindowServer
          1% hidd
    Top Processes by Memory: ℹ️
      326 MB SMSDaemon
      292 MB mds_stores
      275 MB Airmail
      189 MB Google Chrome
      103 MB Finder
    Virtual Memory Information: ℹ️
      10.97 GB Free RAM
      3.63 GB Active RAM
      932 MB Inactive RAM
      1.64 GB Wired RAM
      2.75 GB Page-ins
      0 B Page-outs

  • Calendar App which Shows Day or Week on Startup Screen

    Anyone know of an app that shows the current day or week on the startup screen? In other words, when I power on in the morning, I'd like to see the current day's or week's events pop up.

    There is no app as that screen cannot be modified by any apps.

  • Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes

    2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
    I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
    I went into the full screen view, edited a photo and got out of the full screen view to export it.
    All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
    (note: at the bottom it says 380 items displayed)
    Going back to full screen view, everything looks and works as nothing has happened:
    In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
    Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
    To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
    At some point I saw this weirdo but have not been able to replicate it:
    Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
    Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
    Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
    edit: added the note under the first image

    When the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
    Regards
    Léonie

  • Youtube videos wont go to an actual full screen.

    i have no clue what happened, just the other day when i clicked on full screen on youtube videos, it actually went to full screen. now when i click on full screen it just fills up my firefox with the video besides the top address bar. i took a screen shot of a random video if that helps. i would like it to go back to the way it used to be, and the way other videos play still.

    heres the image

  • On Firefox Nightly (64bit) full-screen is not full-screen. Menu bar and tabs appear above the full-screen.

    I'm running Debian Testing (Jessie) with a 3.15-10.dmz.1-liquorix-amd64 kernel. I'm running Mozilla Nightly 34.0a1. All is well except in full-screen mode. The problem is present whether running a video using the Flashplayer or HTML5. When playing a video and selecting "Full-screen mode" Firefox goes into full-screen as usual, except... the tab bar appears above the so-called "full" screen and so does the navigation/search bar which appears just below the tab bar and just above the video itself.
    I can make this problem disappear by creating a new profile which is basically a "blank slate" (nothing added). I can show you a screen-shot if you wish to see the non-full-screen yourselves.

    Hi dsiddens
    You can right-click empty space on the Tab bar or Navigation Toolbar to open the toolbar context menu and set a tick on "Hide Toolbars".

  • I can't play videos (youtube for example) unless it is in full screen mode. The audio works in either, but the video only shows in full screen. Any help would be greatly appreciated.

    I can't play videos (you tube for example) except in full screen mode. The audio works in either, but the video doesn't load or run in the normal you tube web site.
    Any help would be greatly appreciated.
    Thanks
    Also, the error console shows all sorts of different errors. Though, alot of error parsing values.

    Do you have any Mail plug-ins? In particular, do you
    have any plug-ins installed on one computer but not
    the other? In the Finder, go to each of the following
    folders (if they exist). What do you see there?
    /Library/InputManagers/
    Not Found
    /Library/Mail/Bundles/
    Not Found
    ~/Library/InputManagers/
    Smart Crash Reports Folder / Smart CrashReports.bundle
    ~/Library/Mail/Bundles/
    MailRecent.mailbundle
    > I have a number of Mail Rules in
    place which place messages
    of certain topics in specific Smart
    Mailboxes
    This doesn’t make sense to me. You cannot tell a rule
    to move messages to a smart mailbox, only to a normal
    mailbox. Each smart mailbox has its own set of
    conditions that messages must satisfy in order for
    them to appear there.
    OK. I misstated this. I have a number of Smart Mailboxes with their specific rules in which to route certain topics to specify mailboxes. I am trying to not have to create each Smart Mailbox on each computer.
    The problem is that when I am on the road I add contacts, bookmarks, keychain items, contacts into my laptop and vice versa when home. I would just like to have those Sync on both computers. Seems like it should be easy, but it hasn't been.
    I really don't think I have anything "non-standard." A few Smart Mailboxes, a couple of signatures, thats pretty much it.
    Note: For those not
    familiarized with the ~/ notation, it refers
    to the user’s home folder. You can easily locate any
    of the folders referred to in this post by copying
    the folder path here, doing Go > Go to Folder
    in the Finder, and pasting the folder path
    there.

  • Ever since I downloaded the new version a few days ago I get full screen popup ads whenever I try to open a new site. It's INCREDIBLY annoying, and sometimes there is no icon to close them. WHY, why would Firefox allow this?

    I don't HAVE any more details. Whenever I open a new site, I get (so far) one of two full screen advertisements. Most of the time there is the word "Skip" in the upper right hand corner, but on occasion that is not there, and there no way to get beyond the ad screen except to go into what they are trying to sell you. It is imposing and obnoxious to the nth. This has only happened since I downloaded the latest version (I think the BETA 4) 3 days ago. If this can not be resolved, I want to go back to the older version.
    Thanks,
    Kathryn

    The Firefox pop-up blocker is usually very effective for blocking pop-ups generated by websites, but it sounds like you may have picked up some Malware that is generating those pop-ups from you own PC.
    Install, update, and run these programs in this order. They are listed in order of efficacy.<br />'''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' <br />These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
    ''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
    SuperAntispyware - [http://www.superantispyware.com/] <br />
    AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
    Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]<br />
    Also, if you have a search engine re-direct problem, see this:<br />
    http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html

  • SimpleDateFormat: when day of month becomes day of week

    I have a weird situation where the SimpleDateFormat class seems to interpret the "dd" mark as day of week instead of day of month when I use a certain pattern. The following code demonstrates the problem:
    public class ByteTest {
        public static final String PATTERN = "mm HH dd MM F";
        // public static final String PATTERN = "dd MM yyyy";
        public static void main(String [] args) throws Exception {
            String str = "11 11 08 11 1";
            // String str = "24 11 2004";
            System.out.println(strToDate(str, PATTERN));
        public static Date strToDate(String date, String pattern) throws ParseException {
            SimpleDateFormat formatter = new SimpleDateFormat(pattern);
            formatter.setLenient(false);
            return formatter.parse(date);
    }The result (at least for me) is:
    Exception in thread "main" java.text.ParseException: Unparseable date: "11 11 08 11 1"
    at java.text.DateFormat.parse(DateFormat.java:335)
    at ByteTest.strToDate(ByteTest.java:20)
    at ByteTest.main(ByteTest.java:14)
    When I change "dd" from 08 to 07, I get this:
    Sat Nov 07 11:11:00 EET 1970
    ...and finally, when I change the pattern (done here by uncommenting the commented lines and commenting the ones above them), I get:
    Wed Nov 24 00:00:00 EET 2004
    So, as you can see, for some reason "dd" is interpreted as day of week number in the weirder pattern (which unfortunately we have to use in a pattern matching thing we are using). Any ideas?
    When I comment the line with setLenient(false), it also works fine, but unfortunately we need to use that flag because otherwise users could input weird values for the various fields.
    I tried adding Locale.UK to the parsing method, but that made no difference so clearly my locale (+02:00 GMT) is not at fault.
    I also considered if the day might be out of range since using this pattern we get year 1970, but clocks start counting from 1.1.1970 right? So that doesn't seem a likely cause either. :-/
    The markers for day of week in SimpleDateFormat are E and F; so I guess the question is, when does d become E or F...

    I'm not sure I quite understand what the problem is... the reason why you can't parse that date is that it's invalid, Sunday November 8 on 1970 goes to the second week of the month, so day-of-week-in-month is 2, not 1.. so the string you should pass is "11 11 08 11 2"

  • Year-to-date behaviour when filtered on day-of-week

    In our data warehouse design, the time dimension has - amongst others - following columns:
    - day id [ = YYYYMMDD format ]
    - day of week [ = name of day of week: Monday, Tuesday, ... ]
    - week id [ = IYYYIW format ]
    - year id [ = IYYY ]
    Our fact table, which contains turnover information, has - amongst others - following columns:
    - net amount [ = physical table column containing numeric value ]
    - net amount ytd [ = logical column: ToDate(net amount, year id) ]
    An analysis was built based upon this dimension and fact table, which is filtered with prompted values. Prompts are foreseen for week and day of week.
    When filtering on week the behaviour is very much as expected; the "net amount" is assigned the total net amount of the chosen week, and the "net amount ytd" is assigned the total net amount for the year up to the chosen week.
    When adding day-of-week to the filter condition however the result is not as expted; the "net amount" is assigned the total net amount for the chosen day in the chosen week, as hoped for, but the "net amount yet" still is assigned the total net amount for the year up to the chosen day of the chosen week, while I would expect it to be the total net amount of all chosen day-of-weeks (for example, all Tuesdays) of the year up to the Tuesday in the chosen week.
    Having a look at the query behind the analysis, the (simplified) code for the YTD information looks like this:
    SELECT SUM("net amount")
    FROM   "fact",
           "time dimension" td1,
           "time dimension" td2
    WHERE  td1."week id" = (prompt week value)
    AND    td1."day of week" = (prompt day of week value)
    AND    td1."year id" = td2."year id"
    AND    td2."week id" <= td1."week id"
    AND    fact."day id" = td2."day id"As I said, it is simplified, OBIEE in fact uses a bunch of sub queries and ranking sequences to pull this off, but this is in a nutshell the result. And as seen in the query, the second occurence of the time dimension is not filtered on day of week, which results in the YTD sum for all days, not just Tuesdays, or whatever day was selected.
    It makes sense in a way, after all, filtering on week does not limit the second occurence of the time dimension to filter on week either. But is there any way to force OBIEE to make an exception and come up with following query (or something similar that does the trick):
    SELECT SUM("net amount")
    FROM   "fact",
           "time dimension" td1,
           "time dimension" td2
    WHERE  td1."week id" = (prompt week value)
    AND    td1."day of week" = (prompt day of week value)
    AND    td1."year id" = td2."year id"
    AND    td2."week id" <= td1."week id"
    AND    td2."day of week" = (prompt day of week value)
    AND    fact."day id" = td2."day id"Thanks in advance for your input.
    Edited by: Kurt Geens on Mar 12, 2013 2:52 PM

    805771 wrote:
    Yes, but I don't want to create 7 different jobs, one for each day of the week. Isn't there a way to do this in PL/SQL? It took me 10 seconds in SQL Server's TSQL.Yes you keep showing some TSQL syntax that obviously does not do what you are asking for.
    >
    SELECT
    CASE DATEPART(dw,GETDATE())
    WHEN 4 THEN (SELECT COUNT(*) FROM ADR_VLDN )
    ENDSo the equivalent in Oracle would be
    SQL> var n number
    SQL> begin
      2    if to_char(sysdate,'D') = '4' then
      3      select count(*) into :n from dual;
      4    end if;
      5  end;
      6  /
    PL/SQL procedure successfully completed.
    SQL> print n
             N
             1Also takes 10 seconds.

  • How do you add repetitive event a few days per week

    I want to add a weekly event from monday to friday except on wedneday. How can I do that?
    thanks in advance

    In the edit window, look at where it says "repeat". Click on the double arrows, and you'll get choices of "every day", "every week", "every month", "every year" and "custom". Click on "custom". Now, make sure the frequency is set to "weekly", and click on the M (for Monday), both of the "T"s (the first is Tuesday, the second is Thursday), and the F (for Friday). Click OK. If you want the event to end after a certain date, number of repeats, or whatever, set that. That should do it.

  • Function Modules to get First day of week, month, Year

    Can anyone name the Function Modules for getting First day of week, month ,year.

    to get first day of week use this function;   WEEK_GET_FIRST_DAY
          CALL FUNCTION 'WEEK_GET_FIRST_DAY'
               EXPORTING
                    WEEK         = '201107'
               IMPORTING
                    DATE         = l_date
               EXCEPTIONS
                    WEEK_INVALID = 1
                    OTHERS       = 2.
    with DATE_COMPUTE_DAY function you can get date number in week.
    CALL FUNCTION 'DATE_COMPUTE_DAY'
           EXPORTING
                DATE = workdate
           IMPORTING
                DAY  = day_of_week_num
           EXCEPTIONS
                OTHERS  = 8.
      CASE day_of_week_num.
        WHEN 1.
          hold_day_of_week = 'Monday'.
        WHEN 2.
          hold_day_of_week = 'Tuesday'.
        WHEN 3.
          hold_day_of_week = 'Wednesday'.
        WHEN 4.
          hold_day_of_week = 'Thursday'.
        WHEN 5.
          hold_day_of_week = 'Friday'.
        WHEN 6.
          hold_day_of_week = 'Saturday'.
        WHEN 7.
          hold_day_of_week = 'Sunday'.
        WHEN OTHERS.
          hold_day_of_week = 'invalid'.
      ENDCASE.

  • Calendar.app not showing First Day of Week selected in iCal

    I have selected Monday as the first day of the week in iCal. After syncing, Calendar.app on my iPhone 4 does not show Monday as first day of week. My original iPhone 2G (3.1.3, jailbroken) does show the correct start day, Monday.)
    I do not need assistance with my iPhone 2G. I need a solution for my iPhone 4.
    How do I get my iPhone 4 to be in sync with my other calendars?

    That's a real pain. I'm in Australia and the regional settings have Monday as the first week, which throws me out because all my calendars and even settings in iCal have Sunday as the first day of the week (which is what it's supposed to be). To get what I want, I have to set my country as New Zealand, and this messes up my phone number formats (closest to Australia than any of the others that start the week correctly though). It should be an option in the settings!

  • Adding a day of week to a cube

    I need to add the day of the wek to a cube and I am wodering whaer i should do this.  In the trasnfer rule or update rule or somwwhere else.  basically I want to Call this fuction module DATE_COMPUTE_DAY and then use this to convert to the day: DAY_NAMES_GET.
    If want to store day of week returned from DATE_COMPUTE_DAY in my cube in a new infoobject. Then bring in the text for the infoobject from table T246.
    Can I do this in the update rule?

    You can do that in update or also in trasnfer rules, where you prefer.
    For me it's better to do that in update rules.
    Hope it helps.
    Rergards

Maybe you are looking for

  • How do you use Multiple Hardrives with ONE Library in iTunes 7?

    I have a large (approximately 3000 CD music collection) and I want to archieve it in Lossless format on several harddrives. I want iTunes to veiw the collection over several HD's as one Library. Any Suggestions?

  • After Archive and Install, music and photos lost

    Hello, I installed Leopard yesterday on my Imac desktop and it went fine, but then somehow it locked me out of the hard drive, and then...the blue screen. I put the orginal Tiger disk back in and re-installed the previous software, opting for 'archiv

  • Finder wont open after Firefox 4.01 update

    Hello, Just updated firefox and now my finder will not display on my desktop when I click on the finder logo or when I use "command n". The only way I can get a finder window open is to right click any app in the dock and choose "show in finder" . I

  • P_page_url not found

    Hi, I have a question. I have a form and a report on the same page. The report has a <htp.p(p_page_url);> in the "after displaying the Header" section of the additional PL/SQL and it displays the Current pages URL correctly. The same <htp.p(p_page_ur

  • Adobe captivate multiple quizzez within a single project

    Hello I am trying to create a test that includes 6 different exams, but i want the usert to have to pass each exam with at least a 75% before they can access the next quiz. I am very new to captivate. Any help would be very appreciated. Thank you