HT2518 after migrating, i cannot open my files...password not accepted

After migrating my PC to my Mac book Pro, I cannot open my files on my MAC. I put in the password but it is not accepting it.

Hi PE
Yes, but nothing happened.
I was instructed to press some key during startup of Photoshop, and it should reset the program.
However, it did not work.
Br
Lars Hansson
Den 29/10/2013 kl. 11.49 skrev PECourtejoie <[email protected]>:
Re: After updating photoshop CS5 to 12.0.4 x32 (windows) I cannot open my documents/files or create new
created by PECourtejoie in Photoshop General Discussion - View the full discussion
Hansson, did you get a window asking you if you wanted to reset your preferences.
Maggedotno, is it the english version? Do you have third party plug-ins? Can you post the contents of help>system info?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5796463#5796463
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5796463#5796463
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5796463#5796463. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

I see message "Cannot open the file. Not enough memory to open the file"

When I'm trying to open file from adobe.com on my tablet, I see massage " Cannot open the file. Not enough memory to open the file" . I've got 10 gb free memory , so I dont know, why...

Which system are you running (is this information correct in your profile)?
Are there complicating issues to this question such as you transferring libraries between computers?
Have you upgraded iTunes recently?
Troubleshooting iTunes installation on Mac OS X - http://support.apple.com/kb/HT2311 - read section on Opening iTunes for information about running multiple copies of iTunes.

Cannot open this file is not movie file

Having a problem opening files in e mails. Get a response that says this movie cannot be opened this file is not a movie file they are whv files that i am having problems with don't know what a whv file is.
THANKS FOR THE HELP
<Post Relocated by Host>

The header statement for this forum states that this forum is for feedback about Apple Discussions only. You should repost your question in the forum corresponding to the OS that you are using. To select the proper forum, go to http://discussions.apple.com/index.jspa?categoryID=1
Are you sure the file is "whv" and not "wmv"? "whv" is a file extension associated with VS Ver 1.0 Session Data, a Windows application.
 Cheers, Tom
P.S. Add your OS to you discussion profile.

After migrating to a new computer, Aperture will not accept registration on new computer (OS10.6.7)

Just got a (new to me) iMac and used firewire to migrate apps and data from an iMac OS 10.5.8. However, Aperture will not recognize the registration number. Help, please.

If my memory serves me correctly you can only have Aperture 3 installed on 1 computer at a time so if you have it installed on the original Mac and this new system at the same time it may give you a multiple installations detected warning or something of that nature.
Best of luck.
That is correct however Aperture does allow multiple installs to allow a user to have Aperture running on one computer at a time. For example a photographer may have a MacPro notebook and and Mac Pro desktop. He can use the license when he's on a shoot in the field using the MBP while the Mac Pro sits dormant at home. The software is sophisticated enough to detect he's trying to run one license on multiple machines simultaneously. I have successfully migrated Aperture myself and use it on my iMac and MacBook Air however as stated only one machine at a time.
The OP mentions the machine is new to him, which complicates matters quite a bit. I hope he got the original media from the seller if he did not then there is a good chance he is running illegal software and was duped by the seller. The OP doesn't say where he got the iMac so I'm assuming he bought it used, if I am correct then this is one the problems of buying used, caveat emptor. If I'm incorrect (like maybe it was a hand-me-down from a relative) then all he needs to do is get the media and key code.
Apple is careful on it's licensing on it's professional software.
Roger

After activating "Click-to-play" plug-ins, I cannot open pdf files.

In the latest release of Firefox, information about how to prevent plug-ins from loading automatically was in the release notes. I activated this in about:config. (Click-to-play).
After that, I cannot open pdf files! When I click on a link all I get is an empty window. Reloading page don't help.
What I can do, is to click on the button next to the awesome bar and set that plug-ins will always load automatically for this page. Then the pdf file loads.
Another work around is to copy the link and paste it in IE.
Is this a bug with "click-to-play"?

Thanks cor-el. I have read the various bug reports and it is indeed the same. Has been known for a while...
Anyway, I find no mention of the work-around: "Click on the button next to the awesome bar and set that plug-ins will always load automatically for this page."
I don't know if there is a place to give that feedback.

After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

Numbers is a spreadsheet program and FileMaker is a database program, so you probably can't use Numbers to open them unless you had first exported them from FileMaker in a spreadsheet-compatible format.
If you upgraded from 10.6 Snow Leopard or earlier and your old copy of FileMaker won't open anymore, it might be a PowerPC application that is not compatible with 10.7 and later. If that is the case, to work with your FileMaker files you should upgrade your copy of FileMaker to the latest version, which seems to be FileMaker 12.

Cannot Open Excel File after exporting from Disco Plus

Hi there,
I got a question from one user having issue with opening Excel file after exporting from Disco Plus.
The report has been using for a while and he is using Excel 2003 version and Discoverer 10g(10.1.2.2), he never got this kind of error before, just recently got error.
After exporting from Disco Plus he saved file on his desktop and when he tries to open the excel it says "Cannot be Accessed, can be corrupted...." but this is not from network drive since he saved file on local desktop or C drive.
Also not for all reports, only this particular report and only specific parameter, for example for parameter 2008 Feb opened successfully, but for2009 Feb he gets this error when trying to open excel.
i tried in excel 2007 also , i dont think this is Excel version error, am not sure.
Also after go live last week (we upgraded database from 9i to 10g) but i am not sure this causes ,since for one parameter working, for other parameter not working.
Actually we should get one window for Macro when we try to open excel, but he is not getting it seems.
Any ideas/thoughts on this would be greatly appreciated.
Thanks for your help
--skat

Rod,
Thanks for your quick response on this.
Yes, we can export to other formats as well, but actually exporting is working, after saving the file on our local desktop/drive and when we try to open we get this kind messages or we cannot open the file, we should get message window for Macro to enable/disable but for this report we are not getting this either,
Also this happens only for specific parameters,like i mentioned above it works I mean excel file opens for one set of parameters but for some other set of parameters cannot open.
For example :- when we enter FEB 2008 it works, if we enter FEB 2009 it won't open the file.
This is weird
I am still working on this issue, may be better to recreate the report again might be helpful,
Any ideas/comments/thoughts would be great
Thanks
Skat

Cannot open survey files from email after upgrading SAP gui to 720

Cannot open survey files attachments from email after upgrading SAP gui from 640 to 720.
Tried uninstalling & reinstalling but still error persists,
Error is : cannot split connection string: /h/server name/s/sapdp00 ( from SAP GUI security )
Please advise.

Can't say I have seen this error before but if it is pertaining to the new security module within 7.20, which are much more strict then 6.40, I would look under the SAP GUI configuration options. Focus on Security > Security settings.
There are pages and pages of rules which can be defined.
A test could be to disable all of them on an isolated machine and set them to allow and see if your problem persists. If the error is resolved, it is something in there you need to address.
Regards,
Zecher

Cannot open powerpoint file after renaming it.

Cannot open powerpoint file after I renamed it. I keep getting error messages -35 and -108. It says I have unknown access to the file now. What can I do?

As a cross-reference:
Eric Root
Re: Hi! I have a problem with finder
01.03.2014 12:14 (in response to Fexei)
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/com.apple.finder.plist. Move the .plist to your desktop.
Re-launch Finder by logging out/in and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.
Resolved the Problem! Thanks to Eric and Leonie
Felix

I cannot open InDesign files after upgrading to CS6.

Error message is "Cannot open the file *.indd. Adobe InDesign may not support the file format, a plug in that support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application" Can anyone help!

That message means exactly what it says, more or less. The three possibilities are it isn't an InDesign file at all (we see that here a lot), there is a .idlk lock file in the same folder (delete it), or the file has been damaged (frequently happens with flash drives).
If you open the file in a plain text editor like NotePad or TextEdit (it will look like gibberish) and paste the first few lines here we may be able to tell you if the file is damaged or not an InDesign file.

After file encryption in Windows 7, Excel cannot open .xlsx file

I just moved all my files to a new laptop with Windows 7. I was using Excel 2007 and Windows XP on the OLD laptop. The NEW laptop has Windows 7 Ultimate and Excel 2010. I turned on file encryption (via Windows File Explorer) and now I'm
unable to open most Excel files.
The error message says: "Excel cannot open the file 'ABC.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file."
I can open the file just fine if I use the backup version from the old laptop. It appears that the Windows 7 file encryption damaged the file from Excel's perspective. No other applications are showing issues and not all .xlsx files are failing.
Any ideas, please?
Thanks,
Ken

This is not a solution but a possible work around to see/salvage the contents of your file. If you have a Google Account
Go to Google Docs (https://docs.google.com)
Log in with your credentials
Upload the troublesome files (xlsx, docx etc)
If you are lucky Google may be able to salvage their contents.
Once uploaded, you can always download the file from Google in a variety of formats

I cannot open a file from LR5 into CC2014 unless it is a smart object. also will not save back to LR at all it gives me an error message "Line: 1 - photoshop.notifyLightroomDocClosed ('lightroom-2.0', 'B53AFA39-A49B-4709-A9BD-0B6467C175C3', 'Macintosh H

I cannot open a file from lightroom into CC2014 unless I open it as a smart object. CC opens, just will not display my image. i am given an error code when I save an image, and can only save to my desktop or other locations, not automatically back into my lightroom.
I am using LR5 latest update, as well as CC2014
Below is the error message:
Line: 1 -> photoshop.notifyLightroomDocClosed ('lightroom-2.0', 'B53AFA39-A49B-4709-A9BD-0B6467C175C3', 'Macintosh HD:Users:BPexposures:Desktop:_DSC5962 as Smart Object-1.psd');

I was also having this issue, and I did some more searching and found this answer in the Adobe forums: Re: Photos from Lightroom 5 to Photoshop CC (2014) and back.... The issue appears to be caused by having not updated Lightroom to the latest version prior to having CC2014 installed (wow that's stupid). The trick seems to be to uninstall Photoshop CC2014 and to then reinstall it after having upgraded to Lightroom 5.5.

Cannot open the file because the open options are incorrect

I'm trying to iterate through a folder of images, open each one of them, duplicate them into another photoshop file and close the individual image. This code works great on a PC (Photoshop CS3), but when I run it on our macs (Photoshop CS3) I will receive the following error on random images. "Error: Cannot open the file because the open options are incorrect" Does anyone know how to solve this problem? I've read about possibly setting the OpenDocumentType but have not seen an example anywhere. This error will sometimes occur after loading in one image or sometimes after 20 images. Sometimes I run it on the same directory multiple times all with various points of error. Sometimes every images is loaded. Any help would be much appreciated. Sample code is below.
i //CODE BELOW
i //allows the user to select an folder full of images
b var inputFolder = Folder.selectDialog("Select a folder that contains the files you want added as layers.");
b var fileList = inputFolder.getFiles();
b var tempRef = app.open(tempName);
b for (var i = 0; i < fileList.length; i++)
b {
b var tempName = fileList[i];
b var tempStringName = fileList[i].toString();
i //used to check if the file in the directory does in fact contain the .png extension
b var reducedFileName = tempStringName.substring(tempStringName.lastIndexOf("/")+1);
b if(reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".png" || reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".PNG")
b {
i //setting reference to opened docuement PNG file
i //This seems to be the section throwing the error. Surrounding with Try Catch revealse the Error noted above
b var tempRef = app.open(tempName);
i //setting a tempName variable to the PNG file name
b var tempName = app.activeDocument.name;
i //setting reference to the active layer in the file
b var graphicLayer = app.activeDocument.activeLayer;
i //setting the PNG layer name to the PNG file
b tempRef.layers[0].name = tempName;
i //duplicating the image onto the opened Photoshop file
b tempRef.layers[0].duplicate(backRef);
i //closing the original PNG file without saving
b tempRef.close(SaveOptions.DONOTSAVECHANGES);
b }
b }

It looks as if the folder contains non Photoshop files, one way around the problem would be to change
var fileList = inputFolder.getFiles();
To specify the file types you want to process IE:
var fileList = inputFolder.getFiles(/\.(jpg|tif|psd|crw|cr2|nef|dcr|dc2|raw)$/i);

Cannot open cs6 files in cc

Hello,
I recently subscribed to CC after completeing a project on the trial version. However since purchasing CC I have been unable to open any of the CS6 files I had downloaded (I could open them whilst on the trial period). Yesterday I just kept receiving the error message " Cannot open the file **** Adobe Indesign may not support the file format, a plug in that supports the file format may be missing or the file may be open in another application" Today I cannot even click to open any of the files, they are in a faded typeset in the documnents or downloads folders. I can open any indesign files I have created from scratch though? So it seems it is just the files originally created in CS6 that are affected. I am working on a macbook, if that makes any difference.
Many Thanks for your help.

Hi Peter,
Thanks for your help. I am working on the 9.2 version Willi.
I am unable to open the downloaded cs6 files on their own, even from the file menu, as the error message appears, but today they are no longer in faded type in the folder, and I am able to click on them and drop into a new indesign file and resave.
So thank you for your help.

Cannot open jpg files in Preview? Error message "may be damaged or use a file format that preview does not recognize".

For some reason I cannot open jpg files from a co-worker who previosuly sent files without any problems. I just bought a MacBook Air with OS X Lion & Preview won't open the files. She sent the same files to another co-worker who opened without any issues? Help! Anyone have any suggestions after having the same or similar problem?

I don't have an answer as to why Preview doesn't want to cooperate, but if you only need to view the jpeg's and do nothing else to them, you can use two FREE applications that come already pre-installed on your Mac... Those are iPhoto and Safari. Just drag and drop over the application icon.
You can also find several FREE photo viewers in the APP STORE.

HT2518 after migrating, i cannot open my files...password not accepted

Similar Messages

Maybe you are looking for