HT2531 spotlight help- MacBook Pro 2011

i have a macbook pro 2011 and when i click on the spotlight icon the computer keeps making the "ding" noise and will not let me access it. Help!!

Might be corrupted Spotlight preferences ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.spotlight.plist
Click Go then move the com.apple.spotlight.plist file to the Trash.
Restart your Mac then try Spotlight.

Similar Messages

FaceTime help MacBook Pro 2011

Hello! I need help with my MacBook Pro 2011. I really would like to FaceTime my friends, but it does not let me. I am running Snow Leopard OS X 10.6.8. Do I need to get Lion? When I try to FaceTime someone, it goes through and says connecting, but then it randomly ends. I am so confused!

Check for updates to FaceTime in the Mac App Store.
Also, with FaceTime running, in the menu bar at the top of the screen, go to FaceTime > About FaceTime. What version?

Help MacBook Pro (2011) doesn't recognise internal display but only external display

Screen has been replaced but that didn't solve anything. MacBook connects fine to any of my TVs but doesn't display anything on its own screen. Have seeked professional help to no avail. Someone please help.

Start your mac up by holding the alt key. That is boot from function.
If its empty then you might have a hard drive issue. Due to your hard drive being picked up but not the partition on the drive. This will most probably be a OS X reinstall.
Erase the drive and reinstall the OS X or run a recovery mode.
Good luck

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.

If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

Hello! Help please! Best external hard drive preferably 1TB for macbook pro 2011. thank you!!!

Hello! Help please! Best external hard drive preferably 1TB for macbook pro 2011. thank you!!!

You can pickup any 1TB USB powered drive for about $100 at just about any local office supply store.
It comes formatted FAT32 (MSDOS) for reading by OS X and Windows PC's.
However if your files sizes are going to be larger than 4GB in size (like video tends to be) then your going to need to select the drive in OS X's Disk utility (in the Applicaitons > Utilities folder) and format the drive exFAT instead.
exFAT is a drive format that 10.6.5 and later Mac's, Windows Vista and 7 machines can read just fine. XP machines need a free exFAT drive install from Microsoft.
Do backup the 1TB to another 1TB drive using Carbon Copy Cloner or another backkup utility because 1TB is a lot of data to lose on a $100 drive.
I don't advise the "port powered" USB drive as these tend to have power issues and with 1TB of data on it, very risky. Use a powered drive if you can all help it.

Help: Slow Crucial C300 256GB SSD in 17" MacBook Pro (2011) via SATA III 6Gb/s

Computer: 2011 17" MacBook Pro
Drive: Crucial C300 256GB
Drive Firmware: Revision 7
Bay: Main Drive Bay (6Gb/s)
OS: Lion 10.7.1
I did a fresh install of 10.7.1 and I'm getting these speeds on the above configuration:
Here is the same test run on my previous computer, a 2008 Mac Pro, with SATA II (same exact drive):
What is going on here? The Mac Pro with SATA II was running the C300 faster than the brand new 17" MacBook Pro 2011 running SATA III. This drive should be getting up up to 355MB/s read on SATA III.
Can someone please help me figure out why this drive is not running faster in my computer?
Thank you in advance.
FYI - I did install the new EFI 2.2 Update that was released in September. The above tests were after I installed the update! So you can rule out that I didn't install this update that supposedly fixed SATA speed issues on these Mac's.

I solved it. Xbench didn't give the best results. I tried other benchmarking tools and concluded that I am getting the SATA III speeds on this drive on this MacBook Pro.

My Macbook Pro 2011 wont boot properly. only when batter is disconnected. HELP

hi all.
i have recently bought a macbook pro, 2011 i5 4GB knowing it wasn't fully working, but i need some help.
when i try and power it on, nothing happens at all (it did turn on once for about 10 seconds, then shut itself down.) i have since been playing around with it, fault finding, and i have found out that if i have the battery disconnected, and have it connected to the charger it works! (if holding CMD+D.) i have tried running the hardwear test, but when holding down the relivent keys on startup it just continues to load the OS X as normal. i do not have the start up discs either. im not entirely sure where to go from here, id love to know what could possibly be causing this fault. any help would be greatly appreciated. thanks in advance.

Update - I've got it all powered up, updated etc. it only doesn't start now after a forced shutdown (holding off button) if I press shutdown, restart etc it works fine. Really want this sorted, any help would be greatly appreciated. I'm ripping my hair out! Thanks

Macbook Pro 2011 charging behaving weird. Charges and stops repeatedly and takes very long. Help?

So a few weeks ago my MacBook Pro 2011 started having charging problems. I would use it normally. Then plug it in to charge anywhere between 5-20 percent like I've been doing for the past year that I've had it (since August 2011). Anyway, what happens now is that it charges but extremely slowly - at least 4 hours to fully charge as opposed to the 1 1/2 to 2 hours that it used to take. Also, it seems to be draining a lot quicker than it used to while only browsing the internet. Furthermore, while charging, the battery meter goes from the percent its charged to to "not charging" back and forth. What's going on? Is there a problem with my battery, my computer, or the magsafe charger? [please refer to the pictures below to get a better understanding of my problem - these pictures were taken over a 2 hour time period - a time period that usually is enough to charge my computer] - if you'll notice, in the first two pictures, the percent barely went up by 10 in a half hour period:
Here are my Mac power stats:
Battery Information:
Model Information:
Serial Number:-----------
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          406
Hardware Revision:          2
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          6156
Fully Charged:          Yes
Charging:          No
Full Charge Capacity (mAh):          6393
Health Information:
Cycle Count:          343
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -1607
Voltage (mV):          12182
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          25
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          20
Disk Sleep Timer (Minutes):          0
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          No
Charging:          No
Does anyone have any idea what the problem may be?
Thank you,
macstr

try doing a SMC RESET and see if that sorts it out for you.
if doesn't work - better take it to Apple and have them look at it before something else goes wrong...
good luck - hope you get it sorted out..

I have a MacBook pro 2011. And I need help

hi . I have a MacBook pro 2011. And I recorded some videos on aSony camcorder and the camcorder is not comparable with iMovie. And I only nowhow to use iMovie and nothing else. So is there any movie-transferring downloadI can use so I can use iMovie?

Have you checked all of the iMovie compatibility articles on Apple Support?
Apple may not have tested your camera with the current release of iMovie, but it might have done so in prior versions (8 [09], 7 [08], 6 [06], 5 [05], and 4 [04])
If your camera outputs MPEG-2, there's a solid chance that iMovie 9 will properly read its data, as has happened in the case of one 2007 Panasonic SDR-H18 that was not listed past iMovie 6 (this is my own grandmother's camera, which was only supposed to work with some cheap-as-dirt compositor, from a no-name in Japan that pushed its wares also to Fujifilm, JVC, and Olympus). In '09 my grandmother and I went out for Snow Leopard. I installed it without delay, but the Panasonic compositor would frequently crash while previewing a clip post-upgrade. After getting a big runaround from the phone techs, one of them dropped the iMovie hint. A bit more digging through the Apple boards (right here) pretty much sealed things up. The camera worked then, and still works today.
As to other formats, I don't know. Best I can suggest is to give your camera a go at your new Mac (or the other way around).
Nate

Macbook Pro 2011 running very slowly after upgrading to Mavericks

I am in deep trouble with my wife so any help would be gratefully accepted.
Shortly after Mavericks became available I upgraded my wife's Macbook Pro 2011 to use the new OS version. Ever since then, the Macbook has been running noticeably slowly. In particular, Mail is almost unusuable taking minutes to open and showing long delays while moving around messages, folders, etc. Excel and Word are also much slower, Safari is slow, in fact just about everything is grinding.
Any ideas on what can I can do to improve things and apease my unhappy wife would be much appreciated.
I have attached the Etrecheck output FYI
Thanks
Andrew
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.4 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:5:25
Disk Information:
          Hitachi HTS545050B9A302 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (361.28 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Computer, Inc. IR Receiver
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
          [loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          Dropbox
Internet Plug-ins:
          LogMeInSafari64: Version: 1.0.730 3rd-Party support link
          Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
          Silverlight: Version: 4.0.50401.0 3rd-Party support link
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
          LogMeIn: Version: 1.0.730 3rd-Party support link
          Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          LogMeInSafari32: Version: 1.0.730 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          SuperDuper!:          Version: 2.7.1 - SDK 10.4 3rd-Party support link
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               7%          Safari
               6%          Dropbox
               5%          WindowServer
               3%          hidd
               2%          com.apple.WebKit.Networking
Top Processes by Memory:
          119 MB          com.apple.IconServicesAgent
          106 MB          Safari
          94 MB          Finder
          94 MB          Dropbox
          94 MB          Mail
Virtual Memory Information:
          1.26 GB          Free RAM
          1.44 GB          Active RAM
          311 MB          Inactive RAM
          1014 MB          Wired RAM
          251 MB          Page-ins
          0 B          Page-outs

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Can i connect my cintiq 12wx to my Macbook pro 2011 through the thunderbolt using the mini display port to vga adaptor?

I just bought my cintiq 12wx and was wonderding if i can connect it to my macbook pro 2011 through the thurderbolt using a mini displayport to vga adaptor? Please help!

Yes, it should work with a mini-displayport to VGA adapter. Since a 12wx also can take DVI you could use a mini-displayport to DVI adapter instead. Why go analog when you can keep it in digital!
I guess the usb is for the pen.

What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...

As the topic says,
What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
Help me out please.

Yes ... minidisplay
But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit. You may ot may not be able to get the cable to *fully seat* with the adapter.
Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections.

Hello. I have a macbook pro 2011 that originally came with os lion (on the computer not a disk). What I did was I downloaded Os Mountain lion. There was nothing wrong with it but I just feel the battery life is too short. So what I did was I tried to do s

Hello
I have a macbook pro 2011 13" that came with OS Lion (integrated not on a disk). I recently bought OS Mountain Lion of the app store and it is working fine. However I was a bit dissapointed in the battery so I decided to try and downgrade and completely failed, I froze the computer and when I restarted it it did not work. I went into recovery system and erased my disk and all that and went to re-download my OS. I was expecting to get the option to re-download Lion but instead I could only re-download Mountain Lion.
My question is since my computer originally came with Lion can I reset my computer so I get OS Lion back instead of OS Mountain Lion?
Thanks for any help. Any answer will be appreciated even if it is saying it is not possible.

Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
    1.    Select Disk Utility from the main menu and click on the Continue button.
    2.    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
    3.    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    4.    Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and pasted above

Is there a compatibility issue with the Current USB 3 external Hard drives and MacBook Pro 2011 (USB 2)?

I am currently having bad hangs with my 13" MacBook Pro (2011) which I book 2012 ad a New external Harddrive (WD My Passport Edge) which was given to me as a gift.
Friends of mine told me there is a compatibility issue between the USB 3 cord and the USB outlet of my MacBook Pro.
Although this shouldnt be the case as the box of the Hard drive I got said it was compatible.
I even downloaded the WD Drive Utilities and sometimes whenthe Harddrive is plugged in the Utilities doean't Open but just bleeps in the Applications Dock.
Before I used the Harddrive I read a lot from the WD Manual and went to their site and downloaded a firmware update so I really don't know what the problem is.
What I am afraid of is that I may lose some files if I place them in the external Harddrive.
Can anyone help me with this or should I be asking for a replacement harddrive?
This is my first experience with an external hard drive as I never used one before.
Thank you very much.

To be honest, I've had back luck with Western Digital drives and I avoid them at all costs. If I were you, I would return the WD drive and look at externals from OWC or MacMall (LaCie, even G-Tech).
That's just my personal opinion, mind you...
Clinton

HT2531 spotlight help- MacBook Pro 2011

Similar Messages

Maybe you are looking for