HT2589 How do you create apple ID without the payment method?

How do you create an apple ID without payment method?

See this Discussion from the More Like This section on the right...
https://discussions.apple.com/message/18689003#18689003

Similar Messages

HT2589 how can i create apple id without using credit card details ?

how can i create apple id without using credit card details ?

@Limnos - that doesn't work anymore. There is no NONE option. I've been at it for hours trying to set up my daughter's account. I've tried creating and verifying an appleID on the web, on her touch...everything. Every single time you get to the stupid Touch, it wants to walk you through the verification of the account and it demands payment (even for their suggested apple Remote method listed in the KB).

HT201359 How can I create apple Id without submitting credit card details

How can I create apple Id without submitting credit card details

There are instructions on this page for creating a new account withou giving a credit card number : http://support.apple.com/kb/HT2534 e.g. select a free app in the store and click on 'create Apple id' when 'buying' it

HT5114 How can I create multiple accounts without the necessity to create multiple email addresses? I now have 2 i-phones (mine and my wife's#, 1 i-pad #mine#, 1 i-pad mini #10 year old's#, and 1 I-pod touch #11 year old's). I would like to maintain pur

How can I create multiple accounts without the necessity to create multiple email addresses? I now have 2 i-phones (mine and my wife's), 1 i-pad (mine), 1 i-pad mini (10 year old's), and 1 I-pod touch (11 year old's). I would like to maintain purchase control, but would like to be able to have a separate account ID for each person. Is that possible?

Each email address can only be on one iTunes account, and all purchases are tied to the account that buys them. If you want to have separate iTunes accounts on each then you will need separate email accounts for each iTunes account

HT201441 how to un link apple id without the original apple id

how to un link apple id without the original apple id my ipod is restored and the owner that had the device past away and dont have a way to fix the ipod in order to sell it for the relative that is trying to deal with the lost I was told to sell this items to help the relative that had the lost... please let me know how to do this '.... tks

There's no way to do it, sorry.

How do you create a messages account the new macbook air

how do you create a messages account the new macbook air

Not possible to create a new mailbox with the iPhone.
If the account is an IMAP account, you can create additional server stored mailboxes with the email client used on your computer for accessing the account or via webmail access for the account using a browser. Any additional server stored mailboxes created with an IMAP account will be available automatically when checking the account with the iPhone's Mail client, and will be kept synchronized with the server automatically.
This is not possible with a POP account. You may be able to create additional server stored mailboxes with a POP account via webmail access for the account using a browser, but such mailboxes will not be available with the iPhone's Mail client, or with any email client used to access the account.
Message was edited by: Allan Sampson

HT2589 How to register an apple id without a credit card

I don't know why do i need to enter my credit card to register an apple id?
Anyway, I followed a help page that claims registering w/o a credit card is possible. But in the process it asked again for a credit card. And it didn't go further. So it seems impossible to me. Please, help!

Not that I know of. The
Creating Apple ID without credit card: Apple Support Communities
only works with a new ID/e-mail address.
You can contact iTunes:
Apple - Support - iTunes - Contact Us

HT204053 how can i create apple id without filling bill information just for free?

i just want to create apple id without filling bill information, just for free application to download.

False, Apple does not charge for free apps. You have an authorization hold, just like many other merchants do to verify that the account is valid and has funds available. The hold will fall off the account in a couple of days without charging your account.
iTunes & Mac App Store Authorization Holds -
http://support.apple.com/kb/ht3702

How can i create an apple id without a payment method or a free method?

How can i create an apple id by using a free method?

Follow the insructions here. It has to be a new acount, you can't update an existing account.
Create an iTunes App Store account without a credit card

How do you create an array without using a shell on the FP?

I want to be able to read the status of front panel controls (value, control box selection, etc.) and save it to a file, as a "configuration" file -- then be able to load it and have all the controls set to the same states as were saved in the file. I was thinking an array would be a way to do this, as I have done that in VB. (Saving it as a text file, then reading lines back into the array when the file is read and point the control(s) values/states to the corresponding array element.
So how do I create an array of X dimensions without using a shell on the front panel? Or can someone suggest a better way to accomplish what I am after? (Datalogging doesn't allow for saving the status by a filename, so I
do not want to go that route.)

Thanks so much m3nth! This definitely looks like what I was wanting... just not really knowing how to get there.
I'm not sure I follow all the icons. Is that an array (top left with 0 constant) in the top example? And if so, that gets back to part of my original question of how to create an array without using a shell on the FP. Do I follow your diagram correctly?
If I seem a tad green... well I am.
I hope you understand the LabVIEW environment and icons are still very new to me.
Also, I had a response from an NI app. engineer about this problem. He sent me a couple of VI's that he threw together approaching this by using Keys. (I still think you are pointing to the best solution.) I assume he wouldn't mind m
e posting his reply and the VI's for the sake of a good, thorough, Roundtable discussion. So here are his comments with VI's attached:
"I was implementing this exact functionality this morning for an application I'm working on. I only have five controls I want to save, but they are all of different data types. I simply wrote a key for each control, and read back that key on initialization. I simply passed in property node values to the save VI at the end, and passed the values out to property nodes at
the beginning. I've attached my initialize and save VI's for you to view. If you have so many controls that this would not be feasible, you may want to look into clustering the controls and saving the cluster as a datalog file.
Attachments:
Initialize_Settings.vi ‏55 KB
Save_Settings.vi ‏52 KB

HT2589 how can i use apple id in the iTunes without credit card

i created an apple id but i can't use it in the Itunes and apple store because i don't have a credit card i don't have money to buy application i want just the free ones what sould i do !!!!!

If you only want the free apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

How do you create a list without a visible scroll bar?

I'd like to create a list that can be scrolled via the actual list contents like iPhone apps.
How do you go about setting this up in Catalyst?
I could make the whole area the 'track' and put the
returned array of objects on top of the track but then
the 'thumb' needs to be the returned array of objects
as well.
Any thoughts or suggestions welcomed.
Cheers,
-Truce

Hi Truce,
It may be tricky to use a scrollbar for this. If you think about iPhone-like behavior (or Acrobat-like, perhaps ), you want dragging downward to move the content downward. But when you drag a scrollbar thumb downward, the content moves upward instead. You can "cheat" your way past this by using the transform tool to rotate the vertical scrollbar 180 degrees upside-down.
However, you may still have a few other problems with using a scrollbar. First, having a thumb over top of your list items may make it hard or impossible to click items (without dragging) to select them. Also, when dragging, the items won't move up/down at the same speed as the mouse. This is because the scrollbar's drag range covers the entire list if you move the mouse the full length of the scrollbar... whereas with iPhone-style dragging, moving the mouse this distance will just scroll you one "screenful."
- Peter

How do You Create Photo Albums without PC - Lumi...

My second week helping someone with ther Nokia 800
Recomending this phone will be with me forever Its only now I am finding all the faults that all the foroums show
The first thing was the small text font size that you can not alter !
Now she want to create photo almbums on the Phone and Rename as she did on her C3-01
" Not unrreasonable "
Only to find this Can not be Done without a PC she want to do it on the Phone same as all other Phones as she has no PC
Is there a way this can be done?
This Ones software seems to have gon backwards
Moderator's note: We have provided a subject-related title to help other forum users easily view and respond to this post.
Nokia 701 Helping with Lumia 800

Well as you seem uninterested in a more extensive answer what else is there. A Windows Phone device is not 'on it's own' so to speak it is part of an ecosystem which includes Skydrive, your Micrsoft account and more. As such it uses features provided by these resources.
As the OS is very secure it does not allow too much tinkering with the 'inside' instead it allows you to pull in information from a number of sources. Your Photo Albums are on Facebook, Skydrive and other locations. There they can be edited/renamed or whatever. This has always been the way WP is designed even before other started copying this behaviour as it makes sense.
In a few years time _everyone_ will be using the cloud like this and it will be a none-issue. When the time comes just remember WP was the frontrunner in this and the other systems followed their lead..
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

How do you locate a bug WITHOUT the emulator and the console?

Hi.
I'm new here and my English is not perfect but I'll try my best to explain my problem.
I'm trying to port J2ME games to various mobile phone devices. I've no problem fixing bugs on Nokia, Sony Ericsson, or any models that offer an emulator and a console window.
*** The problem is: In some case, The same build runs fine on Nokia/Sony emulator, but crash/freeze on LG phones.
(this is just an example, it's not only LG phones that have this problem though)
I believe it is possible to locate the bug by:
- use the 'try/catch' block and print the error message using something like
g.drawString(e.toString(),0,0,0);
where 'g' and 'e' is a Graphics and Exception objects.
But I wonder if there's a way to print 'everything that should be printed on the console', on the phones's display. So we don't need to manually put try/catch block.
ok, to sum up the question.
Question:
1. Is there a way to print 'everything that will normally appear on the console', on the phones's screen?
2. If no, then I'll need to try/catch the problem.
But how can you use try/catch and "drawString" everywhere in the code?, while the actual drawing will be done only in the "paint()" method?
I'm thinking of using 'getGraphics().drawString' when using try/catch outside the paint() method. but what's the point if the actual drawing will be done only in paint() method anyway...
Sorry if it's a stupid question. I just started learning Java programming 3 months ago, let alone J2ME. >_<
Thank you. =)
/bow

Hi Kakyoin,
What I found was helpfull is creating a method in the MIDlet where you can display messages. For instance:
    public void createFormScreen(Alert alert) {
        // Set up the initial screen for the MIDlet
        Form formScreen = new Form("Your MIDlet name");
        firstScreen.append("Welcome to your MIDlet");
        myChoice = new ChoiceGroup(null, ChoiceGroup.EXCLUSIVE);
        myChoice.append("Your first choice", null);
        myChoice.append("Your second choice", null);
        formScreen .append(myChoice);
        formScreen .addCommand(OKCOMMAND);
        formScreen .addCommand(EXITCOMMAND);
        formScreen .setCommandListener(this);
        theListener = this;
        if (alert == null) {
             theDisplay.setCurrent(formScreen Screen);
        } else {
            theDisplay.setCurrent(alert, formScreen);
    }So, from your constructor call the createFormScreen method, and your initial screen will be displayed.
When an allert situation occurs in an object, call createFormScreen in a method like:
     protected void displayMessage(String title, String msg) {
          // Display the error message
          Alert error = new Alert(title, msg, null,
                    AlertType.ERROR);
          error.setTimeout(Alert.FOREVER);
          myMIDlet.createStartScreen(error);
     }Now the error message will be displayed on the screen indefenitaly. Off course your object where the error occurred should have a reference to the MIDlet object. I hope this helps you.
Maik

How do you create a graph in the blueprint of solution manager?

Hi,
Does anyone know how to create a graph in the blueprint of solution manager?

Is a graphic, i´m gonna to summarize you in a chart what i´m doing ....i hope you understand and can help me....
i sinchroniced Solution Manager with Aris for Netweaver and i want to see the graphics that
were created in ARIS for netweaver in Solution Manager but can not be .
I have been researching and not have to see if the Web service??
Thanks!!!
Edited by: Mariana Lavastida on Aug 14, 2008 2:33 AM

HT2589 How do you create apple ID without the payment method?

Similar Messages

Maybe you are looking for