HT2602 I am stuck. I can not figure out how to get the microsoft office that is on my (admin) profile dock onto the dock for the other users on my mac. Can anyone help me out?

I am stuck. I can not figure out how to get the microsoft office that is on my (admin) profile dock onto the dock for the other users on my mac. Can anyone help me out?

ebony --
So, when you open your main Applications folder, there is no Office app there?
It's in your Users>Applications folder?

Similar Messages

  • WHen I put music onto my devices I will have some songs that will play, while others will be grey and can not be played....also I find that when I purchase an album from iTunes all songs from the album will not be downloaded...

    WHen I put music onto my devices I will have some songs that will play, while others will be grey and can not be played....also I find that when I purchase an album from iTunes all songs from the album will not be downloaded...

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       
    If necessary
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

    Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

    Yes - email & text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks.  If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?!  I've rebooted the iPad & my wireless card several times but neither action helped.  Have any clue what I should do now?

  • Help and some explanation how to get a Microsoft.Office.Tools.Excel.Worksheet host item that extends the functionality of the current Microsoft.Office.Interop.Excel.Worksheet object

    Hello,
    I would use some help and more info about how to get host object that extends the functionality of my current Interop.Excel.Worksheet object. I read this artical: https://msdn.microsoft.com/en-us/library/ee794671.aspx where I can call this function
    GetVstoObject to get host object. But I see that here I need to pass the Globals.Factory object as second parametar. Can someone give me more details about that parameter and how to access it? I would like to get host object so I can access extension
    property, since my interop excel worksheet doesn't have it.  
    I am using Visual Studio 2013 for developing Excel addin. Using Excel 2010.
    Thanks in advance for help.
    Regards,
    Zeljka

    Hi Zeljka,
    >>I am using the Microsoft Office PIAs, so my question is how to access this automatic generated class Globals in my case?   <<
    Sorry, I am not able to understand the application you were developing exactly. From the orgnal post, you were developing an application level add-in, however based on the description above, it seems that you were building an console or Windows form application
    to automate Office application.
    If you were developing Office automation, the host item can't work for this secnario since it should run under the VSTO runtime.
    If I misunderstood, please feel free to let me know.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have just bought a new pc with windows 7 my old one can not be started so I can not deauthorise etc, how do I now put my iphone 4 on my new computer, I don't care about the songs I have those on external hard drive, but I don't want to loose my contact

    I have just bought a new pc with windows 7 my old computer cannot be started so I cannot deauthorise it etc, how do I now put my iphone 4 on my new computer, I don't care about the songs I have those on external hard drive, but I don't want to loose my contacts, calenders etc

    Terry,
    Plug your iPhone 5 into your Leopard Machine.
    Fire up iPhoto.
    The phone should become available in iPhoto, and then you can import the camera roll.
    -Alan.

  • I had my screen sectioned with an application running permanently in it and have lost it, please can someone tell me how to get it to do that again? Thank you.

    Hello,
    At some point a while ago I somehow mistakenly must have clicked on something in error and suddenly my Google Analytics programme (which is shown in by bookmarks at the top of the screen) was displayed in a section of the browser window to the left - the browser screen was split into two sections, with the google analytics program running in the left section and the right section was my regular browser window where everything ran as normal.
    I have no idea how this happened, but love it and have come to really appreciate it. However I've just changed computers, operating systems and allsorts and now I've got everything back on track that window has sadly gone and I cannot find how to get it back. I've searched through every option I can find and cannot figure out how to do that again!
    Can anyone help please? :-)

    Hi jscher200,
    Thank you for your reply, sorry for the VERY late late response, but I have just figured out how to control this separate 'panel'. I find it really useful for monitoring Google Analytics in as it can just sit there running. It does have its limitations, as it's a limited size (you can't expand it to full screen view), so you can only ever see a vertical section of a website and need to scroll to look to the right or left, but I have the live view of people accessing my website running on there and if the numbers start racking up at any time, I can scroll to look and see what pages they are accessing, where they've been referred from, etc.
    To get it to work, you save a website address in the Bookmarks Toolbar and when you can see it sitting on the toolbar at the top of the screen with its little icon, right click on it then click 'properties', then tick the box 'Load this bookmark in the sidebar'. The next time you click on this bookmark to open the website, it will load in this sidebar, which looks like a separate 'window' but is immovable. You can only have one sidebar application running at a time, but can change it by right clicking on the bookmark you want to load in there and it will then change to that one next time you click on that bookmark.
    I hope this might be useful to others, as I asked for help with this on loads of forums and not one person knew that this existed - even really skilled techies!

  • I want to reset my Macbook Pro back to factory condition because I want to completely eradicate Mackeeper which the previous owner (it is preloved) had downloaded. But I don't want to lose the Microsoft Office that she had installed previously. Help?

    I recently bought a pre-loved Macbook which has been sparsely used but I only realised Mackeeper was installed after I got back home. I did a thorough check previously before I bought it but I didnt know what Mackeeper was until I checked it out online. I want to get rid of it completely and the only way to do that is to reset my Macbk to factory mode but by doing so, I will delete Microsoft Office too and the previous owner had lost the key product no and the neccessities to reinstall the software. I have seen others say something about moving it to an external hard drive but I don't have one and I think it would be costly? Please, any experts on this matter come forward and give your best opinions. Thanks!
    Additional info -
    Software type: OS X 10.9.2

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    3. Other issues
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • Why did I get an emails stating that i uploaded 50 photos and have used my quota for the month when I have not uploaded ANY photos. I just installed PSE 12.

    I just installed PSE12 and I think it automatically synced photos to REVEL?
    I don't want all my photos on REVEL. How do i control this.
    It also states that I reached my 50 max for the month. I didn't upload any photos!
    i this a push for paid subscription?
    There is no upload button under share?
    so how is this controlled. I looked at my revel and I have some older pic up there from about 8 months ago.
    All my nikon pics are in raw, when will you support this?
    If I have to convert them all into jpgs, this is a tedious task and I may as well use Flikr?
    Thanks,
    Chet

    Hi Chet-
    This is a user to user forum that  adobe employees also monitor and reply on.
    Our records  show that you have indeed hit your limit of 50 uploads. The uploads began around 5/2 from Elements on Windows to Chester's library, which was then deleted on 5/5. Each upload counts, even if you delete and re-upload.
    When you first install elements, it asks if you want to make all your albums mobile or just select ones. If you say all, then all will be uploaded to revel (if you have enough uploads available). If you select certain ones, then only those will sync with revel. It sounds like you seleted either some or all and your elements organizer is trying to sync with revel as requested. The idea behind mobile albums is that they stay in sync whether you upload from elements or revel.
    If you do not want to have all albums as mobile albums in the Elements Organizer,
    you can open up Preferences, switch to the Adobe Revel Preferences section and if the box is checked saying
    "Automatically access all my catalog media in Adobe Revel", uncheck that checkbox and click OK.
    You do not have to have a premium subscription as long as you only want to upload 50 files or less to revel. A subscription will get you unlimited uploads.
    Regarding raw files:
    1) If you select a raw file to upload to revel from elements, it will first create a jpg and then upload it to revel 12.1. You will only see a jpg file in revel when you look from your other devices.
    2 )If you then edit the raw file from elements, it will replace the old jpg in revel with the edited one.
    3)If you edit the jpg file in revel (that was made from the elements raw file and uploaded to revel in 1 above), then it will show there and will also show up in the version set in elements.
    4) If you import a raw file directly into revel (say from adoberevel.com rather than elements) you will not see it show up in elements. There is not a feature to sync a raw files or their associated jpg file with elements.
    I hope this helps. Please let me know if you have further questions.
    Pattie

  • HT5624 how do I change the security questions on my daughters itunes account. I do not remember adding the questions and they do not make sence to me. can not figure out how to get to her  email account that it is showing for her altern

    I cant seem to be able to change the secutity questions on my minor daughters itunes account. I set the account up but I do not remember adding the security questions and they do not make sense to me. It says that the alternate account it would be sent to is@ me.com but I can not figure our how to get to it to retreive the email to reset the questions. My daughters account may have recently been hacked so I am trying to change all passwords. I changed the itunes account and added another email but I still can not change security questions in case I ever need them.
    <Email Edited by Host>

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
    The reset link on an account will only show if there is a rescue email address on it, alternate email addresses are different and not used for resetting them. If she has a rescue email address on her account then steps 1 to 5 half-way down this page will give you a reset link on the account : http://support.apple.com/kb/HT5312
    Navigate to appleid.apple.com using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    If she doesn't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use steps 1 to 7 half-way down the HT5312 link above to add a rescue email address for potential future use

  • Can anybody tell me how to get INV available quantity of a item through API

    Hello,experts.
    Can anybody tell me how to get INV available quantity of a item through API?
    And offer any example for this.
    Thanks in advance

    Check from This table : MTL_ONHAND_QUANTITIES and MTL_ONHAND_QUANTITIES_DETAIL.
    Anyway just curious, if you able to access this forum (which requires internet connection), why you can't access TRM and IREP ?

  • I gifted a ringtone to my sister that I purchased from the iTunes store, and it is on her phone, but we can't figure out how to get it moved to her ringtones.  Can anyone help?

    I gifted a ringtone to my sister that I purchased from the iTunes store, and it is on her phone, but we can't figure out how to get it moved to her ringtones.  Can anyone help?

    Edit > Preferences.  Select the check box for Ringtones, this will add them to the listing in iTunes. 
    Not sure that really answers your question though.

  • When i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

    when i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

    Ok, it's just a glitch that it's not auto-rebooting from the disk.
    Please backup your personal files off the machine to a regualr external drive and disconnect all drives before doing anything
    Take the 10.6 disk out and clean and polish the bottom with a very soft clean cloth and a tiny bit of rubbing alcohol to cut the oils.
    Stick the disk in and reboot holding c key down, this will make it boot from the disk and you can install Snow Leopard that way.

  • Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion

    Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion.

    FaceTime for Mac: Troubleshooting FaceTime

  • My iphone 5 broke so had to get a sim card and put it in my husbands old iphone 4. i can not figure out how to get my imformation on this his old phone; contacts, apps ect. i have switched my icloud account and apple id on the phone but nothing. HELP!

    My iphone 5 broke so had to get a sim card and put it in my husbands old iphone 4. i can not figure out how to get my imformation on this his old phone; contacts, apps ect. i have switched my icloud account and apple id on the phone but nothing has changed. please HELP!

    You do a restore as new to wipe the iPhone then at the end of restore you will be asked to restore from backup. Choose your iPhone backup.
    Note you cannot restore an IOS newer than the IOS on iPhone, you need to update iPhone first.

  • I am trying to transfer the songs from my iPod touch to my computer and can not figure out how to do it. Please help me..

    I am trying to transfer songs from my iPod touch to my computer and can not figure out how to do it. I also want to transfer the songs I have back in to iTunes. My hard drive went out on my computer and I lost all of my songs, except for on my iPod. I have an iPhone as well and did an update and it wiped out all of my songs. Someone please help me.

    The music sync is one way - computer to ipod.  The only exception is itunes purchases.  Without syncing: File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your comptuer for just such an occasion.  use your backup copy to put everything back.

Maybe you are looking for

  • Brightness at Windows 7 not working - solved

    In my T400 with Windows 7 installed I had the problem that the brightness adjustment didn't work. I searched all forums and installed all new released drivers for Windows 7 (released version) but it didn't solve my problem (including hotkey-driver).

  • HP OfficeJet 4500 and OfficeJet 4600 both not copying any more but will scan and print

    My computer/networking business has 3 HP OfficeJet AIO printers: 2 x 4500 (about 2 years old) and 1 x 4600 (about 6 months old). Only the one 4500 is still able to do everything it should. The others can both print and scan but can't copy any more. (

  • Is there a way to use Text Anchors and Hyperlinks to create a single-page interactive PDF?

    We are trying to emulate the functionality of a website, by creating a series of clickable buttons at the top that would take you to different locations within the page (it's 80" long). This seems to be only possible within multi-page documents, but

  • Configuration Manager Error

    Hi, I have got SQL 2005 Developer edition running and Websphere 6.1 installed, however when I run the LC configuration manager, at the steps where it tests the connection to websphere server, I get the following error: Failed to run JACL scripts. Doe

  • Installing CS4 64bit in Windows 7 to a custom drive letter

    Hi all, Currently a CS3 user on XP SP3 but wanting to retire my old computer and build a new i7 machine running on Windows 7 64bit and will upgrade to CS4 so I can run 64bit mode and take advantage of GPU features plus more than 4gigs of memory! Down