HT2638 Photo date update not effective

Dear all,
Last week, I updated my photos EXIF because the date were wrong (March 2012 instead of October 2013). I see in Aperture & in Finder that my photo & EXIF have been updated accordingly. They are all dated on October 2013.
I sync my iPhone with iTunes and here is the problem. Some photo remains dated on 2012... I think there is a Cache or something like that in iPhoto but I rebuilded 3 times my Library and the problem is still remaining...
I don't know what to do. I would really apreciate to have the right date on the photo. I'm making a world tour and that's all my memories
Regards,
Pierre

First thanks for anwsering,
This involve iPhoto '11 on OS X Mavericks (10.9.1).
I updated the dates through aperture with "Ajusting Date & Time" in the Metadata menu
In iPhoto & Aperture dates are updated as well as in Finder they all show photo dated in October 2013.
The issue only happen owhen I'm syncing my iPhone and my iPad.
Pierre

Similar Messages

Foreign Exchange - Posting date - updation - Not Working Properly

Hi Friends,
At the time of posting the Purchase invoice in Transaction Code MIRO, the system is picking the Exchange rates form the table based on our posting date in the Invoice screen.
System is not updating the exchange rate, if we change the Posting date just before posting.
Example:
Transaction code MIRO
Posting date 21.01.2010; Exchange rate picked by system - 46.67 (USD and INR) Maintained in Table - 21.01.2010 - Rs.46.67
before posting we are changing the posting date from 21.01.2010 to 22.01.2010
Posting date 22.01.2010; Exchange rate picked by system - 46.67 (USD and INR) maintained in Tabl - 22.01.2010 - Rs.46.99
To bring the correct exchange rate into effect, We are coming out of the Transaction code and Re-entering the correct posting date.
Is there is any solution to make the system pick the exchage rate whenever we change the posting date?
Thanks in advance friends and collegues

Thanks for Quick reply
I have a separte Exchange rate in PO (purchase Order) and I have not activated the fixed Exchage rate in the Purchase Order
If I have activated the Fixed Exchange rate in Purchase order - then the system will not accept other Exchange rates in Transaction Code MIRO (booking LIV)
I have not activated the Fixed Exchange rate in Purchase order (Please have a look at the Purchase Order - A check box for maintaining the Fixed Exchange rate through out the P2P Cycle.
If the fixed exchange rate is notactivated in PO, the system will pick the Posting Date in the Transaction Code MIRO (LIV) for calculating the Exchange rate.
Now my query is why the system is not changing the Exchange rate automatically when I change the Posting date in Transaction Code MIRO. Please also let me know what should be done from our side so that whenever I change the posting date in Transaction Code MIRO, the system should pick the Exchange Rate according to the Posting Date in Transaction Code MIRO.
Thanks for showing Interest
Thak you and Kindest Rgeards
Srikaanth

Master data updation not reflected in Bex report

Hi,
There is a field "Approver" in a report. It will only show the name of the Approver. And recently the same approver name has been changed in MDM system and now the problem is newly changed name is not reflecting the reporting. It shows the only old name in reporting.
My doubt is, what about already loaded record in BW system. Whether changes will be made for the older data. I mean it is possible to overwrite the approver name stored earlier in BW.
D Raj

Hi
Yes, master is always overwritten.
load the new value to the approver Info object.
in RSA1 -> right click --> activate master data.
Initially when data loaded, records will be Modified version. when you perform activate master data then M versions records will turn to A version.
records with A version are only visible in Report.
If your report is on Aggregates, then you have to perform ACR (attribute change run) to update the same new value in aggregate.
you can use the program RSDDS_AGGREGATES_MAINTAIN.
Regards,
Venkatesh

Batch Change Photos' Date - Not Time

Is there a way to change a bunch of photos' date, but not the time?

Neil:
Not in iPhoto. Unfortunately you've go to change the time as well. If there are not too many of them you can do it this way.
1 - move all that you want to redate to the same date to a new roll.
2 - in the Finder copy the folder in the Original folder that represents the roll with the files to be redated to the desktop.
3 - using an application like PhotoInfo batch change the date to whatever you need. It can just add or subtract a specific number of days, months or years to the date as you see fit.
4 - change the name of the folder and import back into iPhoto.
5 - delete the original roll of photos with the incorrect date.
That's about it. It's not too convoluted and can be done. This way the new date will be embedded in the file and stay with it if needed in a new library or other application.
Do you Twango?

I updated my LG G3 this week and now it SUCKS! When I'm connected to WIFI, nothing on Facebook works. The photos and videos won't populate. I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now.

I updated my LG G3 this week and now it SUCKS! When I'm connected to WIFI, nothing on Facebook works. The photos and videos won't populate. I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now. Before I updated my phone, I really liked it, now I don't like my phone at all! When will this be fixed? I hope it's soon. I'm thinking of changing providers now.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have updated my iphone and all data have gone including photos contacts and notes .is there any solution? I am about to syncope!

I have updated my iphone4 and all data have gone including photos contacts and notes .is there any solution?

All data that was on your iPhone should be on your computer.
All photos that were transferred to your iPhone from your computer should remain on your computer and can be retransferred. Photos/videos captured by the iPhone can and should be imported by your computer as with any other digital camera - especially before installing an iOS update. Re-transfer these photos from your computer as with any other photos available on your computer.
Contacts and notes are designed to be synced with a supported application on your computer, and there are some free email accounts that support syncing contacts and notes over the air.

I just updated to ios 6.1 and now my cellular data is not working

I just updated to ios 6.1 and now my cellular data is not working

UPDATE: Ok, I just got back from the Apple store and I've performed a full restore. The good news is that the restore did allow cellular data to work again, restoring as new and restoring an iCloud backup both worked fine. I also tried everything Apple suggests on the http://support.apple.com/kb/TS3780 an only restoring had any effect. Even though that worked for me, I went Ahead and went to the Apple store because this problem had already occurred with me, but only intermittently (requiring frequent resets); the 6.1 update seemed to just make it more 'permanent' so to speak. after the tech tested it with a known-good SIM compared to a new iphone 5, he observed the same stalled cellular data, so my iPhone was swapped out. Hope this helps.
Cheers

Data is not getting updated in table using RFC

Hi Experts,
In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
Regards,
Sari

HI Sari,
as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
-- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
-- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
Thanks,
Bhupesh

Data is not getting updated in DB table

hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table
sender side:       ZVendorIdoc
receiver side:
DT_testVendor
Table
    tblVendor
      action       UPDATE_INSERT
      access      1:unbounded
        cVendorName 1
        cVendorCode 1
     fromdate    1
     todate      1
      Key
        cVendorName 1
if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
plz suggest if any change need to be done to update the data
Regards
sandeep sharma

Hi Ravi
you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
i did on exp with this : i deleted all the record from the table and then triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
Thanks
sandeep

Table PA0045 is getting updated but data is not getting displayed in Infty

Hi,
When i save entries for any employee in Infty 0045 , the table pa0045 is getting updated with the record.
But FOR FEW USERS, who created the record, the data is not getting displayed in one tab of the tabstrip bur rest tabs are filled with data. Its the case with few users only .
Regards,
Jyoti

Check if there is proper data to be shown in the tabstrip.
EX.. Loan Amount Granted in the Tabstrip Basicdata ...

Data is not updating from DSO to CUBE

Hi Friends,
Can any one please Guide me.
Data is updating upto ODS but not from this lower level ODS to top of the cube from last week and displaying error as " Exception condition "DATE_INVALID" raised" .
How i can proceed to find which date field is getting wrong date or not getting date ..Can any body tell that how we can analize the possibilities in this case to find the error and solution .I need to solve this today,Can any body guide me please.
BR,
Venkat

hi
check the transformations between dso and cube, and check any inconsistence. if not then follow the link
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/F-DATE_CONVERT_TO_FACTORYDATE
this may help you.

Before 8.3 update when I saved photos they were added to my camera roll. Then I could access the photo I wanted from any app. Now when I SAVE a photo it is not added to the camera roll at all. iCloud photo is on. AND my Photo Stream is GONE entirely.

Hi all. Since updating my iphone 6 a couple days ago, I have discovered awful glitches in photos. When I save photos they do not get added to my camera roll. My Camera Roll and Photo Stream used to match. I would take a photo on the camera and I would see it on my photo stream. Yesterday, I added an edited photo to my camera roll by saving it (I thought). But it was not there. In the past, if I wanted a photo to post in any app, from Twitter to Facebook to Yelp, in order to retrieve it easily (if I had a lot of photos on my phone) I would sometimes text it to myself and then save it. It would be added to my camera roll. Then, when any app asked me to upload a photo, I could find it right at the beginning of my camera roll photos. Now, when I save a photo it does not appear on my camera roll. I discovered this yesterday when posting a Yelp review. I found the photo I wanted to use on my camera roll and it was way back at the beginning of the camera roll. I edited the photo. I saved it. It did not get added to my camera roll. So then I looked for the photo on the camera roll where I had originally found it way back at the beginning. The edited version of the photo was gone. Could not find my photo to upload to Yelp. Then I discovered it was the same with every other app on the phone.
PHOTO STREAM DISAPPEARED! This was my main problem and primary question until I tried to resolve the issue. I saw a message on my phone that said (I thought) that I needed to connect my phone to my laptop to restore icloud backups. So I manually connected my phone to my Mac Pro Laptop (2011) and backed up my photos. I made sure iCloud was turned on for photos. I have it set to Download and Keep Originals. It is also set to Upload to My Photo Stream. And iCloud sharing is turned on.
WHEN I connected my phone to my computer I got a message on my phone about setting it up for personal hotspot and it would not complete the update unless I replied. At first i did set it up, but it seemed to be an issue, so I simply let my phone and computer use my home wifi network. I don't need the personal hotspot, but it seemed to affect the photo issue further.
Now where I used to see Photo Stream and Camera Roll, it simply says All Photos. I am extremely confused. This is a mess. Any suggestions would be much appreciated!

I restored it twice, once from icloud backup and then from my computer back up. I just restored again and set it up as a new iphone and now my photos are saving again. I was then able to sync apps and music from my itunes to my phone... So happy you wouldn't believe!!

Data is not updated in the database

hi.. to all..
i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
i don't know wat's problem with the program...
Plz help me.. to get resolve this problem..
import java.applet.*;
import java.awt.*;
import java.sql.*;
import java.awt.event.*;
import sun.jdbc.odbc.*;
public class Customerdetails extends Frame implements ActionListener
     TextField ccod,cname,add,phno,conp,email,fax;
     Label l1,l2,l3,l4,l5,l6,l7;
     Button save,exit;
     Connection con;
     ResultSet rs;
     Statement stmt;
     String s1,s2,s3,s4,s5,s6,s7;
public Customerdetails()
    super("CustomerDetails");
    setSize(700,750);
    setLayout(null);
    setBackground(new java.awt.Color(245, 117, 105));
    l1=new Label("Customercode");
    l2=new Label("CompanyName");
    l3=new Label("Address");
    l4=new Label("PhoneNumber");
    l5=new Label("Contact person");
    l6=new Label("EmailAddress");
    l7=new Label("FaxNumber");
    l1.setBounds(20,100,100,70);
    l2.setBounds(20,180,100,70);
    l3.setBounds(20,270,100,70);
    l4.setBounds(20,340,100,70);
    l5.setBounds(20,420,100,70);
    l6.setBounds(20,500,100,70);
    l7.setBounds(20,580,100,70);
    ccod=new TextField();
    cname=new TextField();
    add=new TextField();
    phno=new TextField();
    conp=new TextField();
    email=new TextField();
    fax=new TextField();
    ccod.setBounds(200,120,150,50);
    cname.setBounds(200,200,150,50);
    add.setBounds(200,280,150,50);
    phno.setBounds(200,360,150,50);
    conp.setBounds(200,440,150,50);
    email.setBounds(200,520,150,50);
    fax.setBounds(200,600,150,50);
    Button save= new Button("Save");
    Button exit= new Button("Exit");
    save.setBounds(200,680,100,40);
    exit.setBounds(350,680,100,40);
    add(l1);
    add(ccod);
    add(l2);
    add(cname);
    add(l3);
    add(add);
   add(l4);
   add(phno);
   add(l5);
   add(conp);
   add(l6);
   add(email);
   add(l7);
   add(fax);
   add(save);
   add(exit);
save.addActionListener(this);
exit.addActionListener(this);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void WindowClosing(WindowEvent w) {System.exit(0);}});
public void actionPerformed(ActionEvent ae)
Customerdetails cud= new Customerdetails();
if(ae.getSource()==save)
s1=ccod.getText();
s2=cname.getText();
s3=add.getText();
s4=phno.getText();
s5=conp.getText();
s6=email.getText();
s7=fax.getText();
try
      String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      con=DriverManager.getConnection("jdbc:odbc:prism");
      stmt=con.createStatement();
      rs=stmt.executeQuery(query);
      stmt.close();
catch(ClassNotFoundException e)
System.out.println(e);
catch(SQLException e)
System.out.println(e);
else if(ae.getSource()==exit)
System.exit(0);
else
System.exit(0);
public static void main(String args[])
   Customerdetails cud= new Customerdetails();
}

This doesn't look right:
,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
/M

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

HT201320 This last week, I updated my iPhone with iOS6 and now my Yahoo Mail no longer works. I've deleted and restored the account without fixing the problem. The iOS update did not effect my iPad. Anyone have a suggestion?

This last week (of 17 Sep 12) I updated my iPhone 4 to iOS 6 and now my Yahoo mail does not work. I keep getting a "Yahoo server busy" message. This problem has not effected the update to my iPad 3 - it works fine. In addition, I have deleted and added my Yahoo mail - same result. Looking for ideas on repairing the link between iOS 6 and Yahoo. Cheers

Same here, albeit with a 3G and both a work Exchange account and personal Gmail are out of action. Reentered my password on the Gmail to no avail.
Unfortunately it seems that increased success has come too fast to Apple, it's starting to display Microsoft-like behaviors, e.g., releasing stuff and letting the customers serve as the beta / guinea pigs.

HT2638 Photo date update not effective

Similar Messages

Maybe you are looking for