HT2693 The Icloud acount has little use but saying its almost full

Dear Sir/Madam,
I have this Icloud acount and very happy with it.
I also have some Apple Devices such as Ipad, Iphones etc. From those devices I have checked that I had used less than 1G in usage. but it shows that my account is almost full. I have contacted some of your App Stores in Sydney. All they do not know why and refere me to contact with you directly.
Please let me know what is happening to my account.
Looking forward to hearing from you soon.

Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new.  Try each of these in order until the problem is resolved.  If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation.  Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG

Similar Messages

  • My camera roll is barely empty but says capacity almost full due to old phone picures from old that I can't view. HELP!!

    My phone only has 200 pictures but capacity says I have almost reached my limit with over 1,000 pictures I cant view. I synced somehow my old pictures from my old phone. How do I clear my space? Help!!

    That's normal.  You can't see photo stream photos on icloud.com.  You can only see them on an iOS device or computer that is signed into your account with photo stream enabled.
    Also, photo stream photos are not backed up, only camera roll photos are.  Photo stream photos will stay in iCloud for 30 days so connecting to your photo stream will enable you to access photo stream photos from the last 30 days.

  • I need to change my iCloud email address.  I changed it for my Apple id but I can't log out of iCloud to change it there.  Find my iPad is activated so I can't delete my iCloud account.  I don't have the email address the iCloud login has anymore.

    I need to change my iCloud email address.  I changed it for my Apple id but I can't log out of iCloud to change it there.  Find my iPad is activated so I can't delete my iCloud account.  I don't have the email address the iCloud login has anymore so I can't have the password sent there.  To sum it up, iCloud has an old email for the account log-in.  I don't remember the password for the old email.  I have Find My iPad activated so the iCloud account cannot be deleted.  And I am already logged out of iTunes & App Store. 

    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple IDand that ID is a previous version of your current ID, not an entirely different one.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • I have photoshop elements 11 installed on my desktop pc, I want to install it on my laptop as well, I read that it can be installed on two systems, but I get a message taht the redemption code has been used by another ID, please help

    I have photoshop elements 11 installed on my desktop pc, I want to install it on my laptop as well, I read that it can be installed on two systems, but I get a message taht the redemption code has been used by another ID, please help

    A redemption code can only be redeemed once.  It is used to acquire a serial number. The serial number is what you need to activate the installed software.  If you did not keep the serial number when you first installed, you might still be able to find it in your Adobe account online if you registered the software.

  • I need help with a second hand iphone i purchased recently,i am having issues setting it up as it has is requesting for the icloud account that was used by the previous user

    i need help with a second hand iphone i purchased recently,i am having issues setting it up as it has is requesting for the icloud account that was used by the previous user

    Sorry.
    The iPhone is of no use until/unless the previous owner removes it from their account.
    You will need to find the prior owner or return the iPhone.

  • TS3988 Hi! I just upgraded my iphones to iOS5, and started iCloud... Now, on my iphones ( both of them!) my cousin's  AppleID comes up when I want to update an app .... When I check the settings on the phones, it has MY appleID, but not for the apps? help

    Hi! I just upgraded my iphones to iOS5, and started iCloud... Now, on my iphones ( both of them!) my cousin's  AppleID comes up when I want to update an app .... When I check the settings on the phones, it has MY appleID, but not for the apps? help?

    Welcome to the Apple Community.
    Which settings are you checking, you should be checking settings > store

  • I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

    i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

    I have exactly the same problem.
    I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
    Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
    Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
    The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
    What the **** Is The Microsoft Deal with all of this!?!?
    PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
    If anyone has a link, it would be appreciated.
    Message was edited by: nostrawaggus

  • My wifi has changed and the backup reminder has come on but I can't get it to go away and I can't log on to the new wifi. How do I fix this?

    My wifi has changed and the backup reminder has come on but I can't get it to go away and I can't log on to the new wifi. How do I fix this?

    Hello Nicolettep,
    It sounds like you are getting prompted to back up your device but you are unable to join your updated Wi-Fi setup. I recommend the troubleshooting from this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Tap Settings > Wi-Fi and turn Wi-Fi off and on
    Restart your iOS device.
    Unable to connect to a Wi-Fi network
    Verify that you're attempting to connect to your desired Wi-Fi network.
    Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.   Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5   I am new to Mac.

    I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.
    Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5   I am new to Mac, so I hope somebody can give me some advice.
    Cheers

    if it's ntfs microsofts filesystem then you need a windows machine to recover them

  • Purchased ML 3 weeks ago from Apps store, started to download then stopped "an error has occurred" tried numerous times since but no success. The ML icon looks to start but says waiting and so am I. Any guidance appreciated

    Purchased ML 3 weeks ago from Apps store, started to download then stopped "an error has occurred" tried numerous times since but no success. The ML icon looks to start but says waiting and so am I. Any guidance appreciated.
    iMac-Mid 2007 MacOSX V 10.7.5

    maybe this will help:
    https://discussions.apple.com/message/19032230#19032230%2319032230
    https://discussions.apple.com/message/19107160#19107160

  • THE BW SYSTEM HAS VERSION 30A26 BUT REQUIRED VERSION 70000

    Hello Gurus!!!!
    I am trying to execute BW 3.0 Query into BI 7 by opening it into BI 7.0 Business Explorer -> Analyzer. It is giving error "THE BW SYSTEM HAS VERSION 30A26 BUT REQUIRED VERSION 70000"
    Please help what does it mean 7 how to resolve it.
    Thanks
    Sangita

    Hi Kumari ...
    Could you please share your findings from OSS?
    I have the exactly same issue and looking for solution
    Thanks & regards
    Ivan

  • For iOS the ipad version shows the folio that has been published, but the iPhone app is not.

    I am responsible for handling the apps and not at all involved with or know how the folio creation process works.
    When I build the app for iOS the iPad version shows the folio that has been published, but the iPhone app is not showing the folio.
    Is this something related to the build process or how the folio was created?
    The folio also shows up in the Android app (at least the phone I have tested with).
    Thanks,

    "Android and iOS viewers have different requirements for displaying folios. Any folio size you create can appear in an Android viewer. The articles are scaled and letterboxed as needed. However, on the iPad, the viewer displays only folios with a 4:3 aspect ratio. The iPhone viewer displays only folios with a 3:2 or 16:9 (1136x640) aspect ratio."
    Here is the entire post if you'd like to read more: Digital Publishing Suite Help | Creating documents for multiple devices

  • My Iphone4 charges when The battery has fully died but when its on the lighting bolt does not appear. "Help"!

    My Iphone4 charges when The battery has fully died but when its on the lighting bolt does not appear. "Help"!

    Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.  If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    Suggest that you take full advantage of the above.

  • Ical program has disappeared from my computer.  The cache still has my info but there is no program to display it.  Can still see it on my touch.  How do I recover it or where can i re download?

    ical program has disappeared from my computer. The cache still has my info but there is no program to display it.  Can still see it on my touch.  How do I recover it or where can i re download?

    Mark,
    To reinstall iCal:
    1. Insert the Snow Leopard Installation disk into the computer.
    2. The disk will appear on the desktop.
    3. Double click on the "Optional Installs" folder.
    4. Double click on the "Optional Installs.mpkg."
    5. Click on (Continue) in Introduction.
    6. Click on (Continue) in Software License Agreement.
    7. Click on (Agree) to agree to the terms of the software license agreement.
    8. Click on the disclosure arrow ▶ next to Applications.
    9. Select (✓) iCal.
    10. Click (Continue).
    11. After iCal has been reinstalled, download and install the Mac OS X 10.6.8 Update Combo v1.1 to bring iCal up to the most recent version.

  • I forgot the icloud password and i've but my email wrong

    i forgot the icloud password and i've but my email wrong what should i do?
    please helppp

    If the methods described in If you forgot your Apple ID password won't work for you, contact: Apple ID: Contacting Apple for help with Apple ID account security

Maybe you are looking for