HT2693 What's pass code before I download recent update for security .
What is a pass code before updating system
Welcome to the user to User Technical Support Forum provided by Apple.
Clearly state your Issue and the Troubleshooting Steps you have tried to Resolve it.
Similar Messages
-
I don't know what to choose when trying to download an update for firefox
See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
If necessary Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
HT201413 I didn't receive pass code before so I need to Recover my pass code
I didn't receive pass code before so I need to Recover my pass code
If you didn't set a passcode, then there isn't one.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
Ask for pass code before turning it off?
I iPhone would ask us for the pass code before we can turn it off, if it's stolen people that have it will be unable to turn it off so we can find it using find my iPhone.
KiltedTim wrote:
For one thing, it would create a fire and safety hazard if the phone were to be physically damaged and could not be powered off.
The power off function is not truly a power switch. It is merely a signal to the electronics to power down the device which even then is not a full power down. There is still some power consumed as when you push this "soft" button again for several seconds the device will power up. There is no true power removal switch on the phone. Your argument about removing power is moot. With a soft power on/off switch if the product is damaged the power off/on function is probably not going to work. As such there are no regulatory requirements as the device is operated by low voltage batteries, not household mains. Big difference. -
What is error code 5105 when downloading free apps?
what is error code 5105 when downloading free apps?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with.
I suspect if you're trying to open a file in 08 that's been opened in 09 the file has been updated to 09 and will not open in 08.
-
Having a constant error when downloading latest update for Illustrator CC, error message:
Adobe Illustrator CC Latest Updates (December 2014) Installation failed. Error Code: U44M1P7U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html -
i am unable to download the update for my ipod.."the network connection has timed out". my internet is working fine, i have the latest iTunes..whats going on?
Temporarily disable/turn off your anti-virus and firewall software and try the download again.
Stedman -
every time i tried to download an update for Photoshop, I received an error message U44M1I210. What do I have to do?
Creative Cloud Help / Error U44M1I210 | Install updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html -
Every time i try to download the update for my iPhone through itunes, An error message shows up! The code is -39 Please help! I need to restore my Iphone but it makes me Download the update to IOS 6 first and it doesnt download
i am having the same problem, my error message is that basically it (connection) has timed out! i have tried all day to get it to go thur
-
After downloading the updates for Premier Elements 12 I got the following error message U44M1P7. What does this mean and how can I correct it. Thanks.
glennpsychdoc
What computer operating system is your Premiere Elements 12 running on? I suspect Mac because of the name your error.
Please read the following Adobe document with the details and fix for error U44M1P7
ATR Premiere Elements Troubleshooting: PE12: 12.1 Update Released
Specifically open the following link in the above
Update 12.1 installation errors | Photoshop Elements, Premiere Elements
Please let us know if that works for you.
Thank you.
ATR -
Forgot pass code so I backed up, updated and now won't restore because icloud is open. I cant get in to turn it off! Help
Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
What is t-code SHD0's 'Variant Groups' used for?
hi all:
What is t-code SHD0's 'Variant Groups' used for?
It seems can't work,who can help me?
thanksss.Variant groups
An extension of the standard variants is involved in the variant groups; the standard groups are often insufficient:
Different users (groups) should work with different variants;
Some users should be able to execute a transaction with different variants.
This is possible - in addition to the advantages that the standard variants offer - with variant groups:
Variants from variant groups are automatically applied, but only for users that are assigned to them.
A user can be assigned to several groups and can change the assignment.
The values of the groups are not applied in the batch input mode.
If a transaction is started with another transaction variant, the values are not additionally applied to a variant group.
How are the variant groups maintained?
You can enter the group names on the "Variant Group" tab and maintain variant groups with the "Create" or "Change" functions.
The group name must be in the "correct" namespace.
In addition, there are two Where-Used Lists:
Which users are assigned to the group,
For which transactions the group applies.
Which transaction variants belong to the groups?
The name of a transaction variant that is to belong to a group meets the following naming conventions:
<Name of variant group><name of transaction code>. Example: A transaction variant is to be created for the XYZ transaction that belongs to GROUP1. The name of the transaction variant is then GROUP1XYZ.
Due to this naming convention, the group name must be in the "correct" namespace.
Transaction variants that (randomly) meet this naming convention do not necessarily belong to a group. The group assignment is activated by
1. Creating a group
2. Assigning users to this group
A transaction variant that belongs to a group can also be used this way, like a transaction variant without a group.
How are the transaction variants that belong to a group maintained?
Transaction variants that belong to a group are maintained in the same way as all other transaction variants, they are distinguished using a naming convention (<name of variant group> <name of transaction codes>).
They can be maintained in the "transaction variants" tab or in the "variant groups" tab. If you maintain them in the "variant groups" tab, you must always enter the transaction code so that the name of the transaction variant can be determined.
Under what conditions is a variant from a group applied?
A variant from a group is applied if users are assigned.
(Only for the assigned users, all other users get the original transaction with a variant from a different group.)
It is NOT sufficient to
Create a group
Create a variant that satisfies the naming convention.
How do you assign users to groups?
You can assign users in the "variant groups" tab in the "user assignment".
Enter the user name.
The user is assigned to the group with the "assign" function, but they see original transaction(s) or the transactions with variants from another group as the proposal.
The assignment of users to the group is deleted using the "delete assignment" function.
The user is assigned to the group using the "Set Proposal" function and the relevant transactions are started for this user with the corresponding variants.
The proposal is canceled with the "Cancel Proposal" function, the assignment itself remains.
If you enter the user names generically (*), you receive a selection screen in which you can
Choose whether assignments or proposals are to be changed
Further restrict user names (the group in the "all users from group" option has nothing to do with the variant group, it concerns the "user group for authorization check" from the user master record (logon data)).
By choosing "Execute", you receive a list in which you can further restrict the user selection. The "Save" function saves the assignments for all selected users.
If you want to start the report in the background, you can choose if just the list should be outputted, or if the database changes should also be performed.
If a user is additionally also to be able to execute the original transaction, he must be assigned to the "empty group", the allocation takes place in the same way, in this case, nothing is simply entered in the group name field.
Regards,
Joy. -
I have an Airport Express and the pass code I used some time ago for my IPad won't work for my new IPhone 5S?
If you are sure that you are entering the correct password, then this sounds like an iPhone issue, so your best bet will be to post in the iPhone Support Community so that the experts over there can help.
Using iPhone
The best that we can do here is suggest that you start with the iOS support document Troubleshooting Wi-Fi Networks and Connections.
Resetting the iPhone took care of an issue like this with my wife's iPhone.
http://support.apple.com/kb/TS1398 -
I am unable to download an update for photoshop elements 11. I keep getting error code U41M1C212.
Can anyone help me figure out how to download the update for ver 11. I have a new camera (Nikon d7100) and the raw files are not supported. I want to download the latest update which I figure should support this new camera. I have tried updating numerous times and I have turned my firewall off...but alas...it didn't work anyway.
Hi grdnlover,
Have you tried downloading and installing the updates manually from http://www.adobe.com/downloads/updates
You may want to refer : http://psekb.blogspot.in/2013/03/error-u41m1c212-while-updating-adobe_ 22.html
Maybe you are looking for
-
HI All, I am getting this error while installing. I tried to modify the task file by changing from err to ign.The problem is that the taks sapview.tsk contains many entries i cannot change one and then try sapinst because i dont know what all views w
-
Ok, I've looked absolutely everywhere I can think to, and still coming up empty handed.. can someone please lend me a hand? I just recently purchased my iPod nano 8g. I had sync'd all my photo's to it.. and everything was going great. Then I decided
-
when adding two videos in timeline, the 1st video last frame and 2nd video first frame overlaping. how to fix this.
-
Sound check doesn't work with shuffle
I can't get the sound check to work on my shuffle. I enabled it in iTunes, and it works fine for my music when playing with iTunes, but when I place the music on my shuffle it doesn't work, even though I have soundcheck enabled in the ipod settings.
-
Installing Creative suite 6, failure to initialize/restart may be pending win 7
During the installer initialization it arrives at the machine restart may be pending however HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager. does not contain InProgress key I have previously rebooted the computer because of issue