HT2711 I used the "repair disk utility" to see why my computer is running slow but it gives me an error message saying, "disk utility can't repair this disk, and restore your backed up files.  My computer was running slow and taking some time to load page

I haven't used my computer in a month, so when I turned it on, I saw it was running slow. The circle that is used to load the page kept coming up and it took sometime for things to load up. I tried to go Into safe mode, and it worked, but I know your limited on what you can do in that world. I also tried to repair the disk but it kept giving me an error message. How can I resolve this problem?

Time Machine is a back up you have to set up to back up before there is a problem like a hard drive failure.
It is possible to recover files from a failed drive, but it is an expensive proposition.
There is a faint hope that an app like Disk Warrior or TechTool Pro might repair the drive. You could try making an appointment at an Apple store and ask a technician there to take a look... the diagnosis will not cost you.
http://www.apple.com/retail/geniusbar/

Similar Messages

  • After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

    After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it. See below for how to clone a drive.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

  • My computer is shutting down before fully booting up.  I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files.  Can anyone suggest what I should do next?

    My computer is shutting down before fully booting up.  I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files.  Can anyone suggest what I should do next?

    So, you can't Install OSX to the external?
    Or you can't boot from it when you do?
    You're not the only one wondering... I'm reminded of the Goose that laid the Golden Egg story.

  • Can I fix a disk with this message?-Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

    Can I fix a disk with this message?
    Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

    Some problems can indeed be fixed this way. But working from Recovery_HD or Disk Warrior DVDs and working in the restricted environment those provide can be difficult. You can literally spend days working on this problem (while your regular work is unavailable) only to discover the old drive is unsalvageable.
    There is no way to know up front whether you are facing a major Hardware failure or a minor software glitch, or something in between. Often you are forced to work from the drive you no longer trust. I continue to recommend you do this work from a different, fully functioning Mac OS X booted from a different drive.
    If you have had the foresight to (as The hatter often recommends) clone your virgin install onto another drive for use in such situations, you will be able to recover from such problems in record time. If not, my previous recommendations stands:
    Buy a new Drive. Or  two. Install Mac OS X from scratch on a new drive, and get your Mac running again. Later, you can use the full power of Mac OS X to attempt to rescue your data, if needed. Then Zero the old drive, to see if it can hold data again reliably.
    If the old drive eventually provides some needed data, and is salvageable, Merry Christmas.

  • Error disk utility can't repair this disk...disk and restore your backed-up files

    I have been working on a project using an external hard disk. I used my Macbook Pro (2010)  to create this project and files (about 31 GB). Now I am trying to open the disk on my iMac (2014) and it doesn't show up. I can see the HDD when I use disk utility but get this message when I try to repair/restore the disc:
    "error disk utility can't repair this disk...disk and restore your backed-up files"
    The funny thing is that the disk works absolutely fine with my Macbook Pro. What am I missing?
    Imac :OSX 10.9.4 , 2.7 GHz Intel Core i5, 8 Gb Ram.

    Nico,
    Did you find a way?
    This just happened to me too.
    https://discussions.apple.com/thread/5981446
    -John

  • TS1901 Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

    Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    *** ??? I need to take out the data from a WD320 that shows this error and then format the WD and put the data into again
    THANKS !!!

    I'm sorry, is there a question here? You seem to know precisely what you need to do…

  • Disk Utility says "drive can't be repaired, disk and restore your backed up files."

    My Mac Book Pro froze yesterday and I had to force restart it. It had been showing me messages that my hard drive disk was full for a while and I was in the middle of transferring files to my external hard drive and I accidentally put a huge large file from my external hard drive into the trash on my laptop which makes me wonder if that means I added more GB to a computer that was already very full. Anyway, after freezing I restarted it and the desktop wouldn't load properly. The desktop picture was there, but folders on desktop did not appear, finder bar was missing and the dock was acting super slow and nothing worked when clicked on. Then the next few attempts were around the same result and eventually became stuck on the apple logo, spinning gear and a progress bar that was not loading at all.
    Here's what I've tried so far:
    Safe mode- nothing happens
    Command + R - I am unsure how to work this since I can't seem to find an internet connection when it prompts for one. None of the internet connections have much signal and my own information doesn't seem to load since the gear spins to find the internet connection name and password I typed to load it but can't seem to find it. Perhaps I have the wrong internet information, but I don't think so.
    I tried Command + S to use in single user mode and type in a command to help fix the drive, BUT, even though the black screen and white lettering mode did show up, it remained in a place where I was not allowed to type anything and the last thing written at the bottom of the screen was something about set up for bluetooth, I think. I tried this twice and both times it stopped in the same place and I could not type a command.
    Disk Utility using installation dvd to verify and repair disk. Verify says disk needs repair and then repair has some red colored phrases: Invalid volume file count. (It should be 786374 instead of 786274) Incorrect number of thread records. And there was another problem listed but I do not remember it. Then, near the end of repairing it says: "Disk Utility stopped repairing Macintosh HD." It tells me it couldn't repair the disk and that I should back up as many of my files as possible, reformat the disk and restore backed up files.
    That would be fine and dandy, but I have no idea how to back up my files and do all this. I have no idea how to exactly get the data off my hard drive. If someone does, please list a step by step guide for me on how to do so.
    I have an external hard drive and I tried plugging in and selecting the hard drive and making a "New Image" to copy to the external hard drive destination, but it just stops a few seconds into it and tells me there is an input/output error. I tried read only, read/write only, compressed options for making a copy and all yield the same result.
    In Disk Utility, I believe I have a partition -the Macintosh HD. I have listed on the left hand side: 320.07 GB Hitachi HTSS45.....etc. and below it in non-bolded, grey lettering it says "Macintosh HD."
    The Hitachi, when clicked upon, shows the S.M.A.R.T. status as Verified and the Macintosh HD doesn't show much in details except for "Not mounted."
    At one point, the Macintosh HD was in bold lettering and seemed to be mounted for a few minutes. When that happened, I was able to see the details reading: Mount Point: /Volumes/Macintosh HD, Capacity: 319.73 GB, Available: 11.92 GB, Used: 307.81 GB, etc.
    I'm getting nervous to keep turning on and off the computer on force start and shut downs, especially since I have been reading up that the longer the computer is on, the more the hard drive is in use and the more chance for it to start deleting or overwriting my files. Is this true?
    It's not mounted anymore since it was momentarily mounted. I just want to get my files off the disk and save them to my external hard drive. That is my main goal right now. What can I do?
    Thank you in advance for your help!

    If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
    1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Disk utility can't repair my 2011 Macbook.  It says "disk and restore your backed-up files".  Now what?

    My Macbook crashed so I tried everything to restart it.  what finally worked is opening it from the install disk.  I performed a "repair disk", and after saying "invalid node structure" and "invalid record count", it says it cannot repair the disk.  I don't know what step to take next.  How do I see if time machine has backed my files up?  Do I need to erase the HD and reinstall? 
    Thanks!

    It seems your hard disk is dead, but you must check further. The easiest way to check is to connect your mac to another mac via firewire cable, then restart in Target Mode. this will turn you mac into an external drive, just the right place to test if your disk is still good.
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1443.html
    See also
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26785.html

  • Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

    Hi, my Western Digital HDD crashed few days ago.
    I had approximatly 450GB on it.
    It doesn't want to be repaired or verified.
    Does someone know a way to save all my files before restoring the Western Digital drive ?
    Thanks you by advance.
    Hope you will find a way. 
    Nico

    Nico,
    Did you find a way?
    This just happened to me too.
    https://discussions.apple.com/thread/5981446
    -John

  • Disk Utility can't repair this disk...disk, and restore your backuped-up file.

    Computer got uber slow.
    I started to worry.
    Now computer won't start.
    VERY worried.
    Tried to repair disk. Received error message above.
    Any help would be greatly appreciated.

    sulaver wrote:
    Computer got uber slow.
    I started to worry.
    Now computer won't start.
    VERY worried.
    Tried to repair disk. Received error message above.
    Any help would be greatly appreciated.
    You can't have received an error message "Disk Utility can't repair this disk...disk, and restore your backuped-up file." since that is pure gobbledegook and isn't even good English.
    What may have happened is that
    (a) your hard drive has become so full that the operating system can't find any space in which to.... operate.
    (b) as macjack says, it has crashed - possibly as a result of (a).
    (c) you have been allowing Time Machine to back up to your internal hard drive instead of to a backup disk, which has caused (a) to happen.

  • I got an error message saying that update couldn't update because disk was full and it said to empty recycle bin, anyone know where to locate this mysterious elusive recycle bin?

    i got an error message saying that update couldn't update because disk was full and it said to empty recycle bin, anyone know where to locate this mysterious elusive recycle bin?

    arghineedhelp wrote:
    i got an error message saying that update couldn't update because disk was full and it said to empty recycle bin, anyone know where to locate this mysterious elusive recycle bin?
    On your computer.

  • I cannot restore aback up from my computer after a softwared update. i kep getting an error message saying the phoneis disconnected even though it it not.

    cannot restore aback up from my computer after a softwared update. i kep getting an error message saying the phoneis disconnected even though it it not.

    If you're not a developer then you really should not have upgraded.
    I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

  • There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

    There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT4623 I am having 4S. It is showing the IOS 6 update, but whenever I try to update it, it shows an error message saying " It cannot be downloaded at this time". Can someone please tell me how to update it?

    I am having 4S. It is showing the IOS 6 update, but whenever I try to update it, it shows an error message saying " It cannot be downloaded at this time". Can someone please tell me how to update it?

    Make sure you have the Latest version of iTunes on your computer.
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch.  I have done this numerous times, but today I got an error message saying the required file cannot be found.  At the same time all of my photos on my iPod vanished.  Can anyone help me?

    I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch.  I have done this numerous times, but today I got an error message saying the required file cannot be found.  At the same time all of my photos on my iPod vanished.  Can anyone help me?

    Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

Maybe you are looking for

  • Not able to call action of a button

    Hi All RIght now i am facing a very strange issue. In my applictaion if on my page i drop a buttion and add action for that button. If i add a SOP(System.out.println()) in that action i am able to see that in my back end means action is called. But o

  • Lockup and messed display with intel 2.7 driver

    my 865 G box xorg 1.5 + intel = crash and i am thrown to the console xorg 1.6 + intel legacy = working (bad performance) xorg 1.6 + intel 2.6 = crash and i am thrown to the console xorg 1.6 + intel 2.7 = no more console but this i have kde 4 themed m

  • Data source for Profit center wise Receivables

    Hi Friends,      Is there any data source/query for getting the Profit center wise Receivables and Cost center wise payables. please guide me to get the same. Thanks in advance Karthik

  • A peculiar problem with encode url

    Hi, I have the following code snippet in jsp <a href="<%=urlencoder.encode("cxc.jsp?P1=RWDS") %">> Rewards</a> But when this page is requested, the oracle application server responds with response 404 stating requested url not found.we aer using orac

  • No time to download whole Master Suite trial - only want InDesign trial!

    The trial of the full CS6 Master Suite takes too long to download and I only want one part of it: InDesign.  How can I just download that trial version?