HT2729 I bought something in a game for 5$ and didn't get anything but I was charged. This is happening more and more and I don't know what to do. Can anyone help me?
I bought something in a game for 5$ and didn't get anything but I was charged. This is happening more and more and I don't know what to do. Can anyone help me?
have you contacted the developers of the games to let them know?
Similar Messages
-
I just got an Ipad and I really dont know much about them its a 32gb 4g wi-fi, I use at&t as my server(dsl) and that works fine but I need to download my mcafee which comes with my at&t for free but it wont let me download it says I need more than 6.1.0and I dont know what to do can anyone help, I know someone that has 1 just like mine but she doesnt use a antivirus and doesnt have any trouble but,,, I have a laptop and a desktop and I use mcafee on both,, so any suggestions, I just down know what to do,,, can anyone give me input on what to do, and I also what to know is there anyway I can use my portable device that I got thru at&t that I can buy minutes on, is there an adapter for this ipad that I can use this on,, help I need all I can get,, thanks chrystie
You can not install it.
Only apps from the official Apple App Store can be installed. -
My ipad screen has gone black and I don't know what to do the screen still works and I can still unlock it and I can still type. But I don't know what to do can anyone help me it will be much appreciated
If the reset doesn't do it then it's possible that the backlight or another part of your screen has broken. Unfortunately it's not really user servicible. I'd make an appointment at your local apple store and have them check it out. If your device is still under warranty and they don't determine that the damage was the result of 'abuse or neglect' (their words) then it could be a free replacement.
I'd just do a backup before you take it in, just in case. -
My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?
Sounds like you may have a harddrive issue. You are probably going to need to get that changed out and then install the OS X again to get it going.
-
Okay I wanted to upload a photo to instagram but i could'nt because it said that I had to go to privacy settings go to photos and turn on the instagram app but there wasnt any app to switch to on amda i dont know what to do can anyone help me?
I also have the ios7 and before i upgraded it it worked fine
-
Hi! I can't save my projects to the creative cloud... When I try to upload them to the cloud it shows a message of no connection. I'm connected, so I don't know what to do, can someone help me?! I'm using Photoshop touch for iPad iOS 7 thanks!!!
No I was not!!! I had to answer a lot of questions after my first time at the cloud!!! Now everything is all right!!! Thanks a lot!!!!
-
Can anyone help me? I redeemed an iTunes card but can't buy anything cause I need to answer the verification questions but don't know them.
You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(89872) -
Ever since the latest update, when I click on the firefox icon in my taskbar, I don't get a new browsing window when I used to be able to do so.
I've checked the tabs menu in the options, and I don't see a way of enabling this feature.
Can anyone help?-> Update Firefox to the latest version 10
* [[Installing Firefox on Windows]]
Perform the suggestions mentioned in the following articles:
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)''' -
I don't know whats the problem can anyone plz assist me
Dear friends
I have two servers one for application and other for oracle. Yesterday we changed the domain of database server and then on application is not connecting with oracle database. we can ping and share files from both servers. Also modified application settings in web server to match new configuration.
And another thing i can't connect with sys as sysdba it shows insufficient privillege error and in the application it shows ora-12638 credential retrieval failed so please anyone help me it is very urgent..C:\Documents and Settings\RSalha>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Sep 15 10:17:28 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: sys as sysdba
Enter password:
ERROR:
ORA-01031: insufficient privileges
Listener.ora_
# listener.ora Network Configuration File: D:\oracle\product\10.2.0\db_2\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = orcl)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_2)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = IMEORCL)(PORT = 1521))
TNSNAME.ORA_
# tnsnames.ora Network Configuration File: D:\oracle\product\10.2.0\db_2\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.10.10)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
) -
I downloaded and installed itunes, but itunes will not connect to ;internet (I do have internet. I don't know what too do, can you help?
I'm having the exact same issue. I'm connected to the VPN, but I can't mount or otherwise connect to the shared drive. Did you ever resolve this?
-
I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?
Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time. -
I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them ... can anyone help?
Hi Mary,
I don't remember those arrows in 10.6, only 10.7 & up!?
I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved all the way to the left. Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
By wuzradioman here...
https://discussions.apple.com/thread/4218928?start=0&tstart=0 -
I was trying to update my ipod for ios 6. It got downloaded but could not update my ipod. my ipod screen is now showing one message usb -up arrow-itunes, can anyone suggest something please.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?
Hello there, RobenCaatje.
The following Knowledge Base article is specific for the issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Specifically:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?
Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
Select the Power Adapter tab and uncheck the boxes marked
Wake for Wi-Fi network access
and
Enable Power Nap...
if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
Enable Power Nap...
11. Reinstall OS X.
Maybe you are looking for
-
I bought the Dark Knight DVD that came with a digital copy and down loaded it into iTunes. But when I sync my 5th gen iPod the movie almost finishes transfering and errors out. Is it only compatable with the iPhone and touch? I found out the first ti
-
Authorization Control For characteristics Maint.
Dear All, My requirement is that,during material master creation/change,my user can change only certain characteristics in a class.What is the purpose of Authorization group field available in CT04.This what comes with F1 help,but I am not able to re
-
Hi, I am using a vendor as a Broker at header level of sales order. This vendor i want to be used in pricing table so that proper brokerage can be paid too him. right now i am using standard condition table 363 (plant, vendor material). but system is
-
Error with Discoverer ADministrator connection
Hello: I´m working with IAS and Discoverer 10g R2.(the discoverer installation is in another Server) My problem is that i can't connect to Database with Discoverer Administrator because i have the error ORA.12170 of timeout. But if try to connect me
-
Flash builder4 and zend studio 7.1.2
Hi I need help, I just installed flash builder 4, I currently have zend studio 7.1.2 I want to know how to enable the flex thing in my zend studio. can somebody please tell me how to do it ?, is flash builder installation enough to enable the flex th