HT2729 Itunes Progress bar stuck

Hi everyone, My Itunes progress bar is stucked and doesn't show the progression of the songs. Do you know how to solve it? Thanks!!

I have this question too!  I'm using 11.0.2

Similar Messages

  • Apple Logo and Progress Bar Stuck 1 out of 5 while Restoring my iPhone 5 to iOS8. How can i Do for This Problem. Sometime iTunes say An Unknown error occured (error -14)

    Apple Logo and Progress Bar Stuck 1 out of 5 while Restoring my iPhone 5 to iOS8. How can i Do for This Problem. Sometime iTunes say An Unknown error occured (error -14) iTunes Version is 11.4

    The error that you are seeing has to do with your Internet connection. Try disabling your anti-virus software and connect the iPhone again and try to restore. See this support document for help. http://support.apple.com/kb/HT1808

  • Progress bar stuck while installing Mavericks in recovery

    Hello
    I erased the harddrive via Disk Utility in recovery and now i'm trying to reinstall OS X Mavericks. The problem is that the progress bar is stuck. It says "Downloading additional components. Your computer will restart automatically" yet there has been no progress at all. It's just stuck. I'm connected to WiFi and everything. It's a 2011 17 inch MBP

    Since the update appeared to complete properly using iTunes, did you try the reset again by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen?

  • Progress bar stuck in upgrade

    While trying to update, I first updated from my iPad, and it got stuck multiple times (between resets by holding power and home button) about ⅚ through the second progress bar. Now I put it in recovery mode, and updated via iTunes. The progress bars on my mac all went through and finished, and now iTunes shows my iPad as it normally does, but my iPad screen still shows the progress bar at ⅚! What should I do?

    Since the update appeared to complete properly using iTunes, did you try the reset again by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen?

  • Trying to install CC apps, Progress bar stuck

    I have spent most of my day trying to get the Creative Cloud desktop application installed (I have had to now create a new user on my computer which has seemingly fixed that), and when I tried to install Audition as a test, the progress bar got stuck at 40%. Since it wasn't going anywhere, I tried to cancel it, but it got stuck on cancelling for ages. So what I did was close the application, end all the Adobe processes and open CC Desktop up again. It crashed twice, and I then tried running it as administrator. It is now running, but my Audition download is now stuck at 11% for no obvious reason.
    Has anyone had similar problems? Is there any way to fix it? (I've tried deleting the adobe files in %appdata%).
    This is a 64-bit computer running on what should be fully updated Windows 7 with 8GB of RAM and an i5 4670K.

    if you've already gone through all the help on that page, you really need to make sure your cc app is properly installed.
    i would uninstall it.
    run the cleaner to see if it can find anything, http://www.adobe.com/support/contact/cscleanertool.html
    restart your computer.
    then reinstall the cc app and make sure it installs without problem.

  • ITunes progress bar freezes iTunes, kinda.

    So I just got my HD replaced. My iTunes library file (the .xml file) became corrupted. I started a new Library. I'm now in the midst of adding new songs, not the songs that I originally had in my iTunes. What happens though anytime I edit the id3 tags for more than one mp3. So lets say I add art work to an album. The progress bar pops up and freezes. iTunes though is still responsive. I can pause music. I can select a different track. Yet, the progress bar still is shown. I've been using iTunes for years and I know this isn't possible. It won't let me CMD+Q quit the app. But if I right click in the dock and choose Quit (not force quit) the app quits fine. I can then reopen it like normal.
    Let's say I go back to the album that I was adding cover art too. Half of the songs will have the cover art, the other half not. I then have to add the art one by one or I'll get that same progress bar error. This is very annoying, since I'm building my library all over again. I have to quit and re open the app multiple times. Frustrating!
    I've tried a new new Library file, I tried re-installing iTunes. Same thing happens. Should I just delete the entire iTunes folder in /Library? Will that fix it?

    Boot from your System install disc and run Disk First Aid and Repair permissions.

  • Itunes progress bar Bug

    Hi there
    I found a bug in the latest iTunes 8.0.2.
    I would like to describe my steps:
    I've just imported an Audio CD. At this this time i deleted some songs out of my Library and selected to delete it from the Harddisk as well.
    After this click it shows up a window that said me "Delete this song" or something. In this window was a Progress Bar which has the same status as the progress from the importing Audio File. It confused me a little. But iTunes has done the Job correctly.

    You're welcome.  However, that isn't a bug; it's designed that way.  When you click Back Up Now in iTunes it will still backup your device to your computer.  This allows you to back up to both iCloud and to your computer at the same time.  The only difference when you are backing up to iCloud is that you devce will no longer automatically back up to your computer when you sync with iTunes.  It automatically backs up to iCloud instead (by connecting your device to wifi and your charger, and locking your screen).  You can still, however, manually back up to your computer at any time by clicking Back Up Now on the Summary tab.

  • Migration Assistant Progress Bar Stuck Halfway

    Today I bought the new 13" MacBook Pro (baseline).  I updated Migration Assistant on my 2008 Macbook and after that the transfer of content to the Pro seemed to be going smoothly.  However, the progress bar of Migration Assistant has stuck halfway, with an estimated 40 minutes remaining.
    I don't know if this is related to the fact that I forgot to have my 2008 Macbook charging and so it ran out of battery during the process, until I realized it and attached the charger.  When I looked online for an anwer, someone had said to make sure that the "donor" computer didn't go to sleep, so I went and changed the settings on the Macbook so it wouldn't go to sleep.  Nothing happened and I don't know what step to take next. 

    The Migration Assistant is known (by users of this board) to be problematic between PowerPC and Intel. If you succeeded the first time, it may be the problems the second go around even though they are between Intel Macs, is from any Rosetta applications and plugins installed on your older Intel Mac.
    Here's the user tip Kappy and I wrote about migrating between platforms:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=1872713

  • Progress Bar Stuck, weird behavior running reports

    Sorry if it's not the right way to reply or post a comment.
    I just installed EA3 and additional to comments reported by ChrisMiller about the "Locks' reports, please, add this "weird" issue that occur once you try to run whatever of those reports, the progress bar got stuck like the query is running but it's not true, if you move your mouse pointer over the progress bar you'll see the child query corresponding  to "Blocking lock by user" the query predicate is looking for :BLOCKER_ID that doesn't exist?  and if you try to run another different report (whatever) you'll see in the progress bar the query executing is the one that was stuck from "Locks" reports, again you see the query with the :BLOCKER_ID in the predicate.

    if you've already gone through all the help on that page, you really need to make sure your cc app is properly installed.
    i would uninstall it.
    run the cleaner to see if it can find anything, http://www.adobe.com/support/contact/cscleanertool.html
    restart your computer.
    then reinstall the cc app and make sure it installs without problem.

  • Itunes progress bar is not moving and music won't play. I also have no audio from my laptop at all. Any ideas? I am running windows 8.

    Have had no previous problems with iTunes but for past two weeks my I tunes progress bar is not moving and music won't play.
    I also have no audio from my laptop at all. Any ideas? I am running windows 8.

    I'm having the same incredibly frustrating problem. I have 50-60 GBs of music and now literally ALL OF A SUDDEN most of my mp3s won't play in iTunes. Of the songs that do play, many of them sound garbled (almost as if you were listening to them underwater). As others have noted, the songs do in fact play properly in other media players (VLC, MPC, WMP, etc).
    I feel like I've tried just about everything but I can't seem to fix the problem. Nor have I been able to find any viable solutions after hours of scouring the internet. Here is a list of the steps I've taken so far, in chronological order:
    1. Closed/re-opened iTunes
    2. Re-booted computer
    3. Uninstalled/re-installed iTunes
    4. Tried deleting songs from iTunes library and then re-adding them, but after dropping files into the library they don't show up at all, iTunes refuses to import them
    5. Downgraded from iTunes 8 to iTunes 7
    None of these things have helped at all and I am amazed that even after completely uninstalling iTunes 8 and then installing version 7 I'm still experiencing the same problem. And, on top of things, I've found that iTunes 7 is not recognizing the ID3 tags for many of the songs it does import.
    My apologies for the length of this post. I just want to be specific and provide as much info as I can so that maybe we can find a solution to this thing.
    So, any help would be greatly appreciated. Thanks!

  • Initial progress bar stuck

    We have a Flex 1.5 app our clients use. 99.9999% of the time
    when our sales people go on a demo for a potential client, the app
    loads just fine. That .0001% of the time, the initial progress bar
    gets to a certain percentage and just sticks. In one situation,
    having the sales person demoing use or install Firefox on the
    client’s machine did the trick. We have a similar situation
    with a potential client and we have tried everything. We’ve
    cleared caches on both browsers, we’ve uninstalled and
    reinstalled the Flash plug-ins for both IE and
    Firefox…we’ve upgraded to IE 7…no matter what we
    do, the app loads up and stops at 8%. It loads for every other
    existing client and every other demo sales goes on…it loads
    on all of our local machines in-office…this one single
    client’s office cannot load the app…and the best part
    is, it loaded for them last week when the sales first went to demo.
    They went in for round two this past week and the app will not pass
    8% on any of their machines.
    Any suggestions?

    I have seen behavior like this when an application is near
    the 32k limit.
    How are you running the app? Always from a Flex server? If
    so, a suggestion for debugging is to compile the swf on a maching
    the works, and then call it from a custom wrapper.
    It might be worth trying this i reverse as well, saving the
    swf on the non-functional system and running it directly from a
    wrapper on a system that it has been working.
    The 32k limit issue involves the compilation on the Flex
    server, If a swf get generted and compiles and run successfully on
    one system, it should run on all.
    Hmm, even before that, try running the app with debug=true,
    on the non-functional system. The debug switch causes code to get
    generated into the swf that changes the way it get compiled. Often,
    this will either overcome the 32k problem, or will display it
    clearly.
    See the FAQ on CFLEX.net for more details on the 32k issue.
    Tracy

  • I updated, playing one day, next day progress bar stuck at 0:00

    I up graded one day, the next the progress bar stays on 0:00 
    Help!!!

    This is a fairly common problem. I have no idea what Apple had not issued a fix for it yet. But here is a thread from a couple months back with one theory as to WHY it happens...
    http://discussions.apple.com/thread.jspa?messageID=1988850
    Patrick

  • Progress bar stuck during update on my ipad. It has been like this for 12  hours. Please help!

    After doing some research, I think it is in recovery mode. I can't connect it to iTunes because it's asking for my 4 number pw-and I can't access it because the screen is still on the status bar! Help!

    Anyone???

  • Mac. MobileMe-to-iCloud. Upgrading Mail Database process seems to be hung - has been running for over 1 hour - progress bar stuck at about 20%.

    Am wondering whether to 'Force Quit' and restart, or to let it keep running. Noticed that Activity Monitor is reporting very use of CPU (98% to 100%) of an activity named as "AddressBookSourceSync". Am not sure if that's related to this issue. Any suggestions? Thanks....
    MacBook Pro 17" Intel Core 2 Duo 2.3 GHZ, Memory 4 GB Mac OS X Lion 10.7.2

    did you ever resolve this?  I have the same problem.  Now it is March 2012, your question was in October of 2011.

  • Yosemite upgrade, stuck at 50% progress bar

    Some guys faced the same issue. But I couldn't restart to safe mode with shift, and recovery mode turn off wifi doesn't help to me. I tried to verify and repair the disk and permissions as Apple Care told me when I called, but not help. I also tried to use internet recovery with cmd option R and reinstall 10.9, but after reinstallation and reboot, it also stuck with some error log file, and I couldn't save this log file to my HD because I don't have permission it said.
    Anyone can help me with that? I tried to use cmd S and sudo command could't be recognized in that mode. Maybe someone can help me go to safe mode without shift and let me turn off file vault (not sure whether it's on) or delete some apps.
    Or any other ways to reinstall 10.9 without losing current files? I didn't back up.
    Please help me.

    This worked for my MBP 17" mid-2010 after 10 hours of minor panic watching progress bar stuck at 50%:
    Reboot and hold SHIFT key to go into Safe Mode and keep holding that SHIFT key.
    *Patience is the key to the Shift key*
    Keep the Shift key down.
    Do not let go of Shift key until you go to Italy when the computer does its Venetian blinds thing and goes into Safe Mode.
    Check whether you have any login items. Do this via via Sys Preferences > Users & Groups
    It is going to be slow. You are in SafeMode.
    Remove any login apps.
    Run any updates for Yosemite (e.g. Pages, Numbers, Keynote) within Safe Mode.
    Reboot. 
    Remember, YMMV

Maybe you are looking for

  • Help DBA and Programmers shut out after site Move.

    I am hoping that somebody will help me with this problem. This week we Moved a group of application programmers to a new site due to office space needs. However we have a DMZ that is accessible from the internet for our customers B2B business. Proble

  • Set image link to a file which not yet exists

    Hi to all, I'm working with InDesignCS2 on Mac and Windows. Is it possible to set an image link to a file which does not exists yet. I have document with some JPG files in low resolution. Later, if the document layout is finished, I want to change th

  • Connecting laptop to WRT350N and wireless security

    Hi, I have the following problem. I need to connect a laptop to WRT350N router. Everything works OK if I do NOT use wireless security. If I use PSK (WAP) then at the Preferred Network screen I set the settings to WAP/PSK and enter the shared key. How

  • Shake Workstation and Rendering Cluster Anyone?

    We are a new company currently developing new products for the scientific community. During development (We are talking months here...), we can allocate time slots for Shake distributed rendering on our development cluster (19 ea. Xserve G5 Dual 2 GH

  • RWD Uperform and BW (Using BEX Analyzer)

    We are currently trying to record our BW/BI training materials with uPerform.  When we try to execute the actual query to produce the report while recording, our PCs lock up and no results are returned.  It actually takes closing out UPerform and BEX