HT2729 my iPad TV artwork is not working. Please Help
When I put my TV Shows on to my iPad the artwork is not showing
I see. Try plugging in another speaker to the headphone jack, if you have one. If this new one works, that means it's the original speaker's problem. If it doesn't work with this new headphone, then it's probably your iPhone's or iPad's software that has the issue.
P.S. make sure the second speaker/headphones work. If these don't work in the first place, the experiment's results will be misleading.
Similar Messages
-
My ipad 3 sounds are not working please help
Hi
I have an ipad 3G wifi IOS version 5.1.1(9B206) modem firmware 1.0.11..once i plug my headset sounds work perfect but without the headset sounds doesnt work..not in you tube not in music nothing..but when i increase the ringing volume in settings -> general -> sounds it perfectly woks but when i increase with the volume button on the right side top it doesnt increse unless the headset is pluged in..also without the headset no sounds on apps, keyboard and when unlocking..i did trying restting the ipad ,tried double clicking the home button and went to multitask and swiped to the right and checked whether the mute is enabled and its a no and its a NO..
Please Helphttp://www.youtube.com/watch?v=cJg7qp_TzqM
watch this works like magic -
HT201406 my ipad touch screen is not working please give solution for it.
my ipad touch screen is not working please give solution for it.
i have connected ipad to itunes and done it restore seetings then also my touch is not working but
when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i doIf you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
Regards. -
After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me
Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?
-
my ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.
Hi
Thanks for the support but I had already tried this . Again did it as you advised. Still not able to connect the ipad mini with Bluetooth.
Could it be that some app is causing issue. I can connect my car and computer over Bluetooth but not ipad mini.
On the other had ipad is connecting to other iPhone but only not mine.
Still showing ipad not supported message. And also shows not paired.
Please help. -
I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!
An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply -
HT1414 my handsfree is not working please help me
Hi There!
I am using Iphone 4s and ny handsfree in not working please help meTry restarting you iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.
-
I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration
Contact the email provider and obtain the correct setup information.
-
The built-in mic in g50 122ca laptop model is not working. please help me out.
the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)
here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report".
Maybe you are looking for
-
How do i find out who is using my apple id?
I have been having problems with my mac air - i get repeat messages that another device on the network is using my mac's ip address. Today, I got an email saying that my apple id was used to sig into iCloud via a web browser. I don't use firefox. I h
-
Bitlocker - Drive not detected, asks to format.
Greetings. Situation: Laptop with encyrpted drive (bitlocker) fails (unable to boot). Data recovery is required. Hard Drive is removed and connected to a system running Windows 7 Enterprise. Instead of drive being detected as encrypted, a Window requ
-
How to add custom buttons in the tool bar of the crystal reports viewer
Hi, I'm using Crystal report viewer (Crystal 2008) in my report and I want to add custom buttons and handle them in the tool bar of the viewer. Is there anyway to achieve this? Please help me in this regard. Thanks in advance. Siva.
-
Hi there, I have an odd problem. Since a couple of days Mail doesn`t sync with Yahoo anymore. It looks like, that Mail can't set this account online anymore. My iPhone doesn't have any problems at all. Funny thing though: I sync Mail (etc) via my Mob
-
I am creating an IDML file by using the properties from a MIF file. I have an Image object in MIF file. Its location is represented by using Left, Top, Height and Width. But in IDML file location representations are different. How can I include Image