HT2729 When I hit camera then try 'Video' the program won't start just photos. What's wrong?

When I hit camera then try 'Video' the program won't start just photos. What's wrong?

Sounds to me like you are trying to tap on the word VIDEO.
To change to video you don't tap on the word VIDEO. Instead, you drag the centre of the screen down. That will change the option from PHOTO to VIDEO.
Of course, to go back to PHOTO or to SQUARE you drag the centre of the screen up.

Similar Messages

I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail. It looks like it's working ok; but when I hit Send nothing happens and the program stops responding. Any suggestions?

I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail. It looks like it's working ok; but when I hit Send nothing happens and the program stops responding. Any suggestions?

I have starter 3.0 and cannot share pictures via outlook express. Evidently that version is discontinued and my outlook express does not support the MAPI that is required. I think the only solution is to upgrade to photoshop
elements or to send photos as attachment to your e-mail. I have the same problem using Zoom Browser EX sending photos via internet. I spent a whole day trying to resove this issue and have exhausted all options. Just like "Instant share" in HP image Zone that was replace by photoshop album starter 3.0 and now it is out dated.

It doesn't open new tabs or windows when I click on then. it gives a problem loading page quite a bit, what's wrong?

When i open it it takes a long time to open, when I go to mail, or other places. it opens a Server not found
Firefox can't find the server at us.mg5.mail.yahoo.com
Check the address for typing errors such as
ww.example.com instead of
www.example.com
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
All this when I click on a button or do a search in Fire Fox.
It seems like I have to play with it to open anything.
I went back to the normal Fire Fox and it's still happening.
I sometimes have to restart my computer to get the buttons in the mail to show up or Face Book to work right.

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

I need to get into the Bios of my p6112p, when I hit F10 it says entering the configuration &doesnt?

I have a hp p6112p that was stuck by lightning. I had to replace the motherboard to get the power supply to turn on. The computer then goes to the Bios start up screen and when you hit F10 it say entering the configuration but never does just stay on the same screen. I replaced the CPU. Same problem. I had my hard drives tested and both are ok. I was told by the company that I purchased the MB from that my memory most likely wasnt compadible. I have tried super talent, g.skill, & acer and no memory worked. I called the company I got the MB again and he said it isnt a defective MB because I and getting to the start up of the Bios screen. He still says its the memory and that Its not like I am a computer store were I have 20 different brands I can try until I find one thats compadible. Can somebody PLEASE HELP ME???? I really am at witts end! Thanks
rebelthepit

rebelthepit wrote: I have a hp p6112p that was stuck by lightning. I had to replace the motherboard to get the power supply to turn on. The computer then goes to the Bios start up screen and when you hit F10 it say entering the configuration but never does just stay on the same screen. I replaced the CPU. Same problem. I had my hard drives tested and both are ok. I was told by the company that I purchased the MB from that my memory most likely wasnt compadible. I have tried super talent, g.skill, & acer and no memory worked. I called the company I got the MB again and he said it isnt a defective MB because I and getting to the start up of the Bios screen. He still says its the memory and that Its not like I am a computer store were I have 20 different brands I can try until I find one thats compadible. Can somebody PLEASE HELP ME???? I really am at witts end! Thanks rebelthepit
Hello reblthepit, HP systems are a bit picky about what memory will work in a HP system.
You might want to go to Crucial.com and run their memory configurator and let Crucial advise the memory that is certified compatible with your system. This takes the guessing out of trying to purchase memory that is supported for your system.
Just because the motherboard will boot the start of the bIOS does not neccessarily tell you a lot. If you had some memory issues, and no memory was recognized by the BIOS, you would be getting some beep error codes.
If the motherboard was not a genuine HP Provided motherboard, it will not work with the HP provided operating system. You would need to purchase a new operating system.
You also could not just replace the motherboard and try to start the system without a new installation of the operating system. There would just be too many driver conflicts.
Just some thoughts.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Adobe Reader won't open Tried installing updated Adobe Reader and error came up in the process and told me to contact software manufacturer. Could I uninstall current Adobe Reader and then try installing the current AR? Any ideas?

My Adobe Reader wouldn't download tickets. Tried opening Adobe Reader application but it would not open. I saw my Adobe Reader needed to be updated, so I attempted to install new Adobe Reader. When it came to finalizing, it said there is an error and can't do. Any ideas? I have no functioning Adobe reader. Should I uninstall old Adobe Reader and then try installing the updated AR?

(Had to step away & do things) I can't even open up the Adobe Reader application to uninstall; get message it won't open. And now have more things needing to be downloaded to print. Any ideas on how to open the app, so I can uninstall. I have a MAC OS X 10.9.4 When the installation initially failed I received this message from Adobe, " Adobe Reader Installation Error Package name Adobe Reader xi (11.0.07) Installer: installing abase path/installer: The install failed (The install encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.) It did not specify what the error was

Photos and camera apps crash when I hit camera roll/take a picture

After updating to ios5, I can no longer access my camera roll, not take a picture. When I hit camera roll, photos crashes. When I take a picture it says saving, then crashes. I have tried turning off the apps and reopening them. I have tried restarting/resetting. I have tried turning it off and letting it sit for 3 days. I tried accessing my camera roll through other apps like facebook, twitter, photoshop but it crashes. I tried to access my camera roll from iphoto and import my pictures but my iphone no longer comes up in iphoto. I feel as though that restoring it may be the only option left, but I do not want to lose my photos and there's still no guarantee that photos and camera will work after restoring. Anyone else ever hear of this before? Help!

There is a similar thread elsewhere...but to save you the search, simply go to this page:
http://www.iphoneincanada.ca/how-to/how-to-fix-iphone-camera-roll-crash-and-phot os-turned-to-other-in-itunes/
The discussion in the other thread leads to that link...
Simply put...I had the same problem, found that link, solved the problem!

HT4623 im having a problem updating my phone. it downloaded the first part but then when i hit install it says software update is not available at this time. what do i do ?

im having a problem updating my phone. it downloaded the first part but then when i hit install it says software update is not available at this time. what do i do ?

Does it say Try Again Later? If so, try again later. Worked for me on one device, later! 2 of my devices are being a bit more stubborn!

TS3899 I cannot select an email to delete on my IPhone 5. When I hit edit then check the email i wish to delete it unchecked itself. Help it is driving me crazy. I tried deleting the email account and re-adding it but it didn't work.

I cannot select an email to delete on my IPhone 5. When I hit edit then check the email i wish to delete it unchecked itself. Help it is driving me crazy. I tried deleting the email account and re-adding it but it didn't work.

Sorry if I confused you. Let me try again:
1) do a full backup your iPhone to a PC using iTunes
2) go to: settings, general, reset, erase all content and settings.erase phone.
3) when iPhone starts again choose set as new phone. Do not restore from icloud or iTunes.
4) once done. Setup your email accounts. When done, verify checked emails do not uncheck themselves.
That resolved, finish setting up:
5) go to: settings, icloud, uncheck email, and set other icons as wished. Now setup icloud account.
6)This step will make all contracts reside in icloud and be available always: Once icloud account is setup, go back to settings, email contacts. Open each email account and uncheck contacts, but leave mail checked. Then go to the icloud email account and check contacts.

When I close Firefox and then come back to it layer a box comes up that says it's already running. It ays to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firef

When I close Firefox and then come back to it later a box comes up that says it's already running. It says to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firefox again. If I can't get this fixed I will start using someone else. Someone told me a way to close Firefox but I forgot what they said.
== This happened ==
Every time Firefox opened
== a couple of months ago

Hello Brian.
You don't need to restart your computer to open Firefox again: you just need to close it manually through your application manager (CTRL+SHIFT+ESC in Processes tab). Anyway, hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Firefox+hangs
What's probably happening is that you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?

I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?

The acsm file is not the book, it is a ticket to get the book. I sometimes get library books online, here is what I do.
1. Start ADE on the computer
2. Go to library website and find the book I want to download.
3. Click on the download link
4. In windows 7 a box opens asking whether I want to open( or run) or save the acsm file
5. Click open/run and ADE downloads the book into the "Library"
6. Transfer the book (epub file) to the reader.

When recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?

when recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?

when recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?
The basic answer is that Apple has not programmed the capture routine with this capability. As such, you can always send QT feedback requesting this feature be added as a future enhancement.

When i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.

when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.?????????????????????

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

HT201210 After downloading latest version of iTunes it will not open. This error message is displayed; The program can't star because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Then a second error box

After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second: iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126). I have tried reinstalling a number of times and restarting computer but no luck.

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

When I watch a streaming HD video the picture is jittery. Could adding RAM solve the problem?

When I watch a streaming HD video the picture is jittery. Could adding RAM solve the problem?

hello ozltem, i think this is related to this bug in adobe's flash plugin: https://bugbase.adobe.com/index.cfm?event=bug&id=3223393 (apparently they are aware of the issue & can replicate it, but they are not fixing it because it doesn't have a high priority).
as a workarounf you could try if [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_solution-2-downgrade-to-flash-10-3 downgrading to flash 10.3] (which is still supported) or [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode].

I was told to update iTunes. The update failed. Now I can't open iTunes but get the following messages: The program can't start because MSVCR80.dll is missing from your computer. Try reinstating the program to fix this problem. Then I get iTunes was not

I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support

Troubleshooting issues with iTunes for Windows updates - MSVCR80

HT2729 When I hit camera then try 'Video' the program won't start just photos. What's wrong?

Similar Messages

Maybe you are looking for