HT2729 Where is "video settings" in the new iTunes?

I am trying to change my fullscreen settings to widescrean but I can't find it

Hello majik25,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning these issues:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Your iPhone, iPad, or iPod touch may not appear under Devices in iTunes after you connect it to your Windows PC. Any of the following may also occur:
The device cannot be restored in iTunes.
An exclamation point, question mark, plug symbol, or "X" appears next to the device's entry in Device Manager.
During an update or restore, the device may no longer be recognized by iTunes.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Similar Messages

  • Where are my apps in the new itunes version?

    I cannot find any of my apps on the new itunes version that I downloaded, I can only see what apps I currently have on my phone, but where are all of my previously purchased/downloaded apps?

    In iTunes, do View - Sidebar.
    Then click apps on left column

  • Where are my apps in the new iTunes?

    Where are they? When I connect my iPad it does'nt show up. How do I update apps if I can't find them.

    In the upper left corner is a drop-down menu. There you can select the apps. To check for updates you have to use the button in the lower right corner.

  • Where is my iphone in the new itunes

    i have connected my iphone 5s to my computer but i cannot seem to find it in itunes. does anyone know where to find it?

    Hello majik25,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning these issues:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Your iPhone, iPad, or iPod touch may not appear under Devices in iTunes after you connect it to your Windows PC. Any of the following may also occur:
    The device cannot be restored in iTunes.
    An exclamation point, question mark, plug symbol, or "X" appears next to the device's entry in Device Manager.
    During an update or restore, the device may no longer be recognized by iTunes.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • In the new iTunes 11 where is the genius sidebar that used to be on the right hand side of your music playlist?

    In the old version of iTunes you had a genius sidebar on the right hand side of your music library that showed similar artists and songs to the song that was currently being played or highlighted in your personal library. Where is that function in the new iTunes 11?

    I looked under file but I couldn't find the "Genius & Playlist" option. I also looked under the other options on the top left side but I couldn't find it there either. And all "Genius suggestions" does for me is show similar songs already purchased in my library. It doesn't show me anything new that I haven't purchased.

  • I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked.  What am I doing wrong?

    I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one. 
    On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
    What am I doing wrong?

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    If necessary:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • Apple aware of video problem in the new Intel iMacs

    Macworld Daily News
    Thursday - February 09, 2006
    Apple investigates Intel iMac Front Row problems
    By Macworld staff
    Apple has confirmed it is aware of, and investigating, reports of video problems in the new Intel iMacs.
    Recent reports claimed that some users had experienced random horizontal lines and other video playback problems when playing video in Front Row.
    "Apple is aware of this issue and is looking into it," the company said in an email to a web-based pressure group that has been gathering information on the problem. "If a customer has any technical issues, they should contact AppleCare."
    The problem is allegedly software-based.

    "Sure, I'd be more understanding had it been an issue that required a very special set of conditions to trigger"
    Apparently it does as this issue is not affecting all users.
    "As I was told, affected owners would not be proactively notified"
    Where you you prefer them to use their limited resources, trying to figure out who MAY be affected and sending them some sort of detailed action plan, or spending the resources determining the cause of the issue and developing a solution that can be distributed to the ones who need it not only now, but those that may discover the issue next week?
    I can understand that you are frustrated, and don't blame you for feeling that way, but this is an all new piece of technology and bugs are going to come up that were missed in testing. No company can afford to test at a 100% level. To do so would drive the costs so high as to make it impossible to sell the product, especially to the market the iMac is aimed at. Apple has a pretty darned good track record of resolving issues quickly when they appear. Until they do you only have a few choices. Use the workaround until the solution appears, waste time complaining about it, or sell the iMac and purchase a different product. That's really about all you can do!
    It was good of you to spend your valuable time, and yes it is valuable, trying to help the engineers or service reps solve the issue. That they spent that much time with you should show their commitment to solving this issue.
    Be patient, give them a chance, they have not had long to try and figure this out.

  • [svn:fx-trunk] 12025: Switching out the old video component for the new video component that uses OSMF .

    Revision: 12025
    Revision: 12025
    Author:   [email protected]
    Date:     2009-11-19 17:48:04 -0800 (Thu, 19 Nov 2009)
    Log Message:
    Switching out the old video component for the new video component that uses OSMF.  Also fixing RSL issue with OSMF because a change in flex-config.xml accidentally got overwritten.  Also fixing a bug caught during the last code review where you would set the volume on the VideoPlayer, but the volumeBar wouldn't be made aware of that change.
    Switching out the video component results in many API changes.  The changes are highlighted below:
    Class name changes:
    - spark.primitives.VideoElement is being renamed to spark.components.VideoDisplay
    - spark.components.mediaClasses.StreamingVideoSource is renamed to park.components.mediaClasses.DynamicStreamingVideoSource
    - spark.components.mediaClasses.StreamItem is renamed to park.components.mediaClasses.DynamicStreamingVideoItem
    VideoDisplay/VideoPlayer event changes:
    The new video component's events are:
    - bytesLoadedChange : org.osmf.events.LoadEvent
    - currentTimeChange : org.osmf.events.TimeEvent
    - durationChange : org.osmf.events.TimeEvent
    - mediaPlayerStateChange : org.osmf.events.MediaPlayerStateChangeEvent
    The old video component's events were:
    - close : spark.events.VideoEvent (removed)
    - complete : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
    - metaDataReceived : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
    - playheadUpdate : spark.events.VideoEvent (replaced with currentTimeChange)
    - progress : flash.events.ProgressEvent (replaced with bytesLoadedChange)
    - ready : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
    VideoDisplay/VideoPlayer property changes:
    Renames:
    - maintainAspectRatio:Boolean has been renamed to scaleMode:String and rather than true/false, it now access 4 values: none, zoom, letterbox, and stretch.  See the enum class org.osmf.display.ScaleMode.
    - playheadTime:Number has been renamed to currentTime:Number
    - playWhenHidden has been renamed to pauseWhenHidden, and it's "tense" has been reversed.  So playWhenHidden = true correlates to pauseWhenHidden = false.  Also, before we would only pause when the video component was explcitly set to visible=false, but now we detect if the video components or any of it's ancestors have been hidden.
    - totalTime:Number has been renamed to duration:Number
    New properties:
    - bytesLoaded:Number This is a new property not available on the old video component
    - bytesTotal:Number This is a new property not available on the old video component
    - loop: Boolean this was a property added a while ago on the old video component but not in the original video player spec
    - mediaPlayerState: this is a new property that details the state of the video component.  See org.osmf.media.MediaPlayerState for all the possible values.
    - seekToFirstFrame:Boolean (pending PARB approval) - This is a new property available on VideoDisplay/VideoPlayer.  When autoPlay = false, if seekToFirstFrame is set to true, then we will connect to the server to start downloading the video, figure out the size of the video and resize appropriately, and show the first frame of the video.  If seekToFirstFrame is false, then no connection to the server is made, there's no implicit size for this video, and the first frame will not be show automatically.  By default the value of this property is true.  In the old video component, when autoPlay = false, we always has the same behavior as seekToFirstFrame = true.  Now it is controllable through this property.  Eventually, (not for Flex 4.0), we will most-likely have support for a thumbnail source or a splash screen so the video's preview will show up without making an unneeded connection to the server.  The property name may change depending on PARB.
    Other changes:
    - autoRewind: The default of autoRewind is now true instead of false
    - enabled: before we paused the video when the video component was explicitly set to enabled = false.  Now we pause the video when the video component or any of it's ancestors have been disabled.
    VideoPlayer-only changes:
    - videoObject:flash.media.Video property is now a new property on VideoPlayer.  It was previously only on VideoDisplay.
    - The skin states for the old VideoPlayer were: connectionError, disabled, disconnected, loading, playing, stopped, connectionErrorAndFullScreen, disabledAndFullScreen, disconnectedAndFullScreen, loadingAndFullScreen, playingAndFullScreen, stoppedAndFullScreen.  The new skin states are: uninitialized, loading, ready, playing, paused, buffering, playbackError, disabled, uninitializedAndFullScreen, loadingAndFullScreen, readyAndFullScreen, playingAndFullScreen, pausedAndFullScreen, bufferingAndFullScreen, playbackErrorAndFullScreen, disabledAndFullScreen
    DynamicStreamingVideoItem property changes:
    - bitRate:Number renamed to bitrate:Number
    DynamicStreamingVideoSource property changes:
    - initialIndex has been added to DynamicSteramingVideoSource
    - live:Boolean has changed to streamType:String which accepts values: live, recorded, any.  See the enum class org.osmf.net.StreamType for more info.
    - serverURI:String renamed to host:Object
    - streamItems:Array has changed types to streamItems:Vector.
    ScrubBar property changes (THESE CHANGES ARE NOT DONE YET, BUT SHOULD BE DONE SOON)
    - bufferedStart will be removed
    - bufferedEnd will be renamed to loadedRangeEnd.  This property name still may change depending on PARB.
    - bufferedArea skin part needs to be renamed.  Probably will be renamed to loadedArea.  PARB still deciding.
    QE notes: -
    Doc notes: -
    Bugs: -
    Reviewer: Kevin
    Tests run: checkintests
    Is noteworthy for integration: Yes
    Modified Paths:
        flex/sdk/trunk/frameworks/flex-config.xml
        flex/sdk/trunk/frameworks/projects/spark/defaults.css
        flex/sdk/trunk/frameworks/projects/spark/src/SparkClasses.as
        flex/sdk/trunk/frameworks/projects/wireframe/build.xml
        flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/VideoPlayerSkin.mx ml
        flex/sdk/trunk/frameworks/spark-manifest.xml
    Added Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin.mxml
    Removed Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer2.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/mediaClasses/StreamItem.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/mediaClasses/StreamingVideo Source.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.png
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin.mxml
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin2.mxml

    I've got that same problem: iPod Touch 2nd Gen, Apple Component Cables, and an HD TV.
    The funny thing is, the cable works fine with an iPod Classic (160 GB) but not for the iPod Touch. Can anyone explain why that is?

  • Where is the calendar and contacts on the new itunes?

    where is the calendar and contacts on the new itunes?

    It should be on the Home page but if you can't find it there go to settings>Genereal>Reset>Reset Home Screen Layout

  • I changed my gmail password after suspicious activity was detected.  It works fine on my computer but my iphone 5 doesn't recognize my new password ("cannot get mail" message).  I've tried changing my phone settings to the new password, but no good.

    I changed my gmail password after suspicious activity was detected.  It works fine on my computer but my iphone 5 doesn't recognize my new password ("cannot get mail" message).  I've tried changing my phone settings to the new password, but no good.

    Hello there dinadinadina,
    It sounds like you have modified the password settings for your Gmail account after changing the password. Thats where I would have started too. Next I would restart the device and test it one more time, and then remove and add the account again in Settings:
    Get help with Mail on iPhone, iPad, and iPod touch
    Restart your iOS device.
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Tap the affected email account.
    Tap Delete Account.
    Add your account again.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • How do you get to the options for export settings with the new quicktime?

    I'm having trouble with the new quicktime pro. I'm trying to export a video with specific settings when exporting. It seems that in this version of quicktime you export and the only options i get is how to format : for ipad/pod/phone or 480p which is not what I want I need to change the settings to make my video 480x360 and fast start for web. can someone help

    How do you get to the options for export settings with the new quicktime?
    You don't Use QT 7 "Pro", GarageBand, a video editor app, or a third-party app like MPEG Streamclip all of which can access user conversion settings.

  • HT1386 I have a new computer and when I tried to sync my iPod Touch with the new iTunes, it has lost all of my music and videos from my iPod/old iTunes library: including all but 4 songs of my bought songs, videos and audeobooks!

    I have recently updated my computer since my old one broke and therefore had to download a new iTunes. When I came to add my iPod to this new iTunes, I was given no option to transfer the contents of my iPod library to this new iTunes and was forced to try 'sync'; when my old computer was repaired once we lost all of our data so I had to download a new iTunes then,all of my iPod downloads were transferred and I could easily reburn my CDs so I didn't think the wiping of my iPod would be a problem. When I clicked 'sync' it warned me that it would replace the contents of my iPod with the new iTunes library, as I said I didn't think this would be a problembut then it asked if it should transfer my recent iTunes downloads so I said 'yes'. The sync was completed but now I only have 4 downloaded songs and 5 albums which I burned to my new iTunes! I have lost all the music I bought, all the videos I bought and all the audiobooks I bought! (Luckily I still have my apps.) I tried to restore backup but realised that only covers calendars, contacts E.T.C and I checked my iTunes account and that shows all my downloads but I can't see a way to restore them or anything like that!
    Please help! I am in despair as you can imagine how much moneys worth I have lost and am losing faith in Apple

    Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
    As IO said before:
    You can redownload most iTunes pruchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    I do not think it included audio books.

  • HT1208 Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Use it the same way as previously.
    ctrl B shows the menus.
    ctrl S shows the sidebar.
    What else do you need help with?

  • I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem?

    I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem? I have uninstalled and reinstalled the program twice. Is there a fix? Is it possible I am missing part of the program? 

    I'd start with the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • Does anyone know a converter from the new iTunes TV/movie file type to one that will work on my 5th generation iPod video?

    I just tried to load some new TV shows from my iTunes onto my 5th generation iPod video and it says the video format is not supported. I currently have dozens of TV shows and movies on the iPod, I just wanted to put some new stuff on there. So I need to know if there is anyway of converting the new iTunes video format into one that will run on my 5th generation iPod.
    Thnaks in advanced.

    When you drag a movie from the Media Browser to the Time lIne in GarageBand, you will see a pop-up "Extracting Audio".
    The Movie and the audio file will appear in separate tracks. You can copy the audio region from the sound track to a different track to keep it safe and then hide the Movie track.
    Léonie

Maybe you are looking for