HT2731 Do u get a bill sent through the post with your purchases on?

Do u get a bill sent through the post with your purchases on?

No.
You can look up your purchase history in itunes.
You should also get an e-mail.

Similar Messages

  • Why can't I open/see PDF files that are embedded in an email or sent through the internet?

    I can read/see PDF files that are attached to an email, but I can't see/read them if they are embedded in an email or sent through the internet.

    I have a similar problem. I can open, read, and save PDF files, but I can't view my online bank statement on my Mac. The statement opens automatically if I use a PC, but on my Mac the page says I need Adobe Reader to view my statement. I already have the latest version of Adobe Reader. The problem seems to be that that the plugin only goes to the Libray. It doesn't get installed into Safari or into FireFox either.

  • I've never used acrobat. I've attempted to contact billing/payment through the Adobe site, but answering questions asked, I'm cycled to the same pages. I need to chat, email, or contact billing

    I've never used acrobat. I've attempted to contact billing/payment through the Adobe site, but answering questions asked, I'm cycled to the same pages. I need to chat, email, or contact billing

    You seem to have asked your question twice. Answred at I've never used acrobat. I've attempted to contact billing/payment through the Adobe site, but answering questions asked, I'm cycled to the same pages. I need to chat, email, or contact billing

  • Updating firmware when I can't get an internet connection through the router

    I am trying to update the firmware for WRT54G V8, but some of the instructions indicate I need to have the router connected and be connected to the internet.  I cannot get an internet connection through the router.  Can I upgrade firmware without being connected to the internet through the router.  (I have had this router for about a year and a half with no problems until now.)

    Yes, you can upgrade the firmware without an Internet connection.
    To upgrade the firmware, first download the new firmware into a computer that you can wire to your router.
    Next, power down your entire network.
    Then wire the computer to a LAN port on the router.
    Disconnect all other wires from the router.
    Power up the router and allow it to fully boot (1-2 minutes).
    Power up your computer.
    Login to the router, and do the firmware upgrade  (it will likely take several minutes).
    Power down your entire network.
    Next you need to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • Tried opening my Mac in safe mode SMS mode. And pram mode. It acts like it is going to start up the gets about 10 percent through the grey start up box and then suts down

    Tried opening my Mac in safe mode SMS mode. And pram mode. It acts like it is going to start up the gets about 10 percent through the grey start up box and then shuts down. Any other thoughts?  Thanks

    Douglaslouis,
    which model Mac do you have, and which version of OS X is installed on it?

  • HT1338 Is the only way to get a software update through the Apple Store where you have to give a credit card?  I thought system updates are free.  I don't want to leave a credit card number with Apple.

    Is the only way to get a software update through the Apple Store where you have to give a credit card?  I thought system updates are free.  I don't want to leave a credit card number with Apple.

    This may also help. Someone in another thread typed the above link only works if you haven't established your account, but when I just checked my account the "None" button was there?:
    http://support.apple.com/kb/ht1918

  • I'm running Lion on a Late 2008 MacBook Air.  With no other applications running, I can no longer Check for Software Updates.  It gets abut half way through the checking process and then freezes.  The MBA passes Disk Utility. Thoughts?

    I'm running Lion on a Late 2008 MacBook Air. 
    With no other applications running, I can no longer Check for Software Updates.  It gets about half way through the checking process and then freezes. 
    The MBA passes Disk Utility. Thoughts?
    Thanks
    Jim Taylor

    How long do you leave it?
    Mine can sometimes sit for quite a while (maybe 10 minutes??) before it finally finishes.
    You could look at the relevant logs via Console (Utilities folder) to see if Software Update is complaining about anything.
    charlie

  • So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

    So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
    Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
    Can anyone suggest a solution to this vexing problem?
    Thanks in advance.

    Jeremy.Laurin,
    have you tried agb76’s approach here?

  • TS1424 When trying to pay for an app, i get the following message:  "your purchase could not be completed. For assistance contact itunes support at .." However i cant find tbe remedy at that address. Any ideas ?

    When trying to pay for an app, i get the following message:  "your purchase could not be completed. For assistance contact itunes support at .." However i cant find tbe remedy at that address. Any ideas ?

    You will need to do as the message says and contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • HT201364 I am unable to redownload OS X Mavericks on a Late 2013 new Macbook Pro 13". I get a message saying "We could not complete your purchase" " OS X Mavericks can not be installed on this computer"

    I am unable to redownload OS X Mavericks on a Late 2013 new Macbook Pro 13". I get a message saying "We could not complete your purchase" " OS X Mavericks can not be installed on this computer"
    I nee an easy way to resolve this with Apple.

    why is it this problematic to resolve?! obviously there's a valid installer image for our macs, why can we not have access to it to use on our laptops?
    I do not understand, nor accept the explanation given before - about it being a newer model... it doesn't make sense... how does that translate to "no download available".
    also, if it was a valid point - we would have had that download with the release of 10.9.1 - which we don't.

  • HT4414 When I try to purchase Mountain Lion i get an error message:  "We could not complete your purchase.  The product distribution file could not be verified. It may be damaged or was not signed."  I can purchase other apps, why not Mountain Lion?

    When I try to purchase Mountain Lion i get an error message:  "We could not complete your purchase.  The product distribution file could not be verified. It may be damaged or was not signed."
    I can purchase other apps, why not Mountain Lion.   I get the same message on my wife's IMAC.

    The only thing that worked for me was to boot in safe mode.
    Power down.  Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore. 
    No trouble at all once I did this.
    Hope it helps.

  • Hi, every time I attempt to purchase OXS Mountain Lion I get a message that says unable to complete your purchase because "The product distribution file could not be verified. It may be damaged or was not signed." Any idea what I am doing wrong, cheers.

    Hi, every time I attempt to purchase OXS Mountain Lion I get a message that says unable to complete your purchase because "The product distribution file could not be verified. It may be damaged or was not signed." Any idea what I am doing wrong, cheers.

    Welcome to Apple Support Communities
    Press Shift key on boot and purchase OS X 10.8

  • I am getting some errors while distilling the post script file.

    I am getting some errors while distilling the post script file. please check and suggest me, how to control this?
    <PDFX ISO="15930-1:2001" COMPLIANT="true">
    PDF/X Compliance Report
    1.  Summary
       Warnings: The total found in this document was 0.
       Violations: The total found in this document was 0.
       No problems were found in the document.
       This document passes PDF/X-1a:2001 compliance checks.
    </PDFX>
    Regards,
    Jack

    @Jack – you were using a joboptions file by Distiller to convert a PostScript file to a PDF/X-1a.
    What you get is no error message, just a report, that everything went ok. And in this case I cannot see any advantage using PDF Export for printing to PostScript/distilling to PDF. Ok, maybe one, CS5 and above would export in a background process.
    To prevent InDesign flattening transparency, you could use PDF/X-4 as your export setting. You cannot use writing to PostScript for that task.
    Check including tags for tagged export to prevent misalignment of text because of a strange bug with PDF Export when you are using 9pt text on 12pt leading or text with a ratio of 9/12 for point size and leading in multicolumn text frames.
    Uwe

  • I made a purchase of books through the program, with the money as I was cleared for two purchases and I did not have books

    I made a purchase of books through the program, with the money as I was cleared for two purchases and I did not have books

    This morning, I did a power down and reboot of the I-Pad, that got the "Please Wait" resolved.  I then tried clicking on the additional picture set and it did download and install, so the problem is now resolved.

  • When synchig my iphone to my itunes, I get an error message at the end with code 1150.  What is this error code and what does it mean?

    When synching my iphone to my itunes, I get an error message at the end with code 1150.  What is this error code and what does it mean?

    try uninstalling and reinstalling itunes on your computer. here is a link for that http://support.apple.com/kb/HT1925

Maybe you are looking for