HT2731 i hav iphone and i restart it and delete all the files inside how can i start again my iphoe it say i need a valid sim with no pin lock to activate it again pls help

i hav iphone and i restart it and delete all the files inside how can i start it again it say i need a valid sim with no pin lock to activate iphone again

ICCID unknown is a critical failure, usually caused by hacking or jailbreaking the phone. It can not be fixed. The phone will need to be replaced.

Similar Messages

No SIM card installed insert a valid SIM with no pin lock to activate iphone

Dear Sir, Recently I noticed that my iphone 3GS is responding very slowly, I thought it got hanged due to the high memory usage so I restarted it but after the restart it showed me iTunes logo & a USB cable. Though the SIM card inside the phone doesn’t have any lock but the message says: No SIM card installed insert a valid SIM with no pin lock to activate iphone. When I connected it to itunes I get this message: iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes, there was a passcode on my iphone which can not be unlocked now as after sliding the arrow the only options I get are: emergency calls & info’s as IMEI: 01 215500 xxxxxx x & ICCID: Unknown. I was suggested to delete the complete programme & get the iTunes reinstalled but I don’t want to lose my data. Can you help me to get my data back? Pls. reply ASAP. Thanks & regards.

ICCID unknown is a critical failure, usually caused by hacking or jailbreaking the phone. It can not be fixed. The phone will need to be replaced.

HT1430 i dont really have knowledge about this its so confusing.it try putting new sim with no pin lock to activate it again but still nothing only itunes on screen

help

I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
Anyway, if you choose to do so, you can leave feedback here:
Apple.com Feedback
Apple Support Feedback
Developer Feedback
Product Feedback
QuickTime Feedback
Search Feedback

I keep getting the message :No SIM card installed Insert a valid SIM with no PIN lock to activate iPhone - there is a sim in the tray in the phone...how do I fix this?

I have recently upgraded from the iPhone 3g to an iPhone 4, and I was going to give my 3g to a friend, but it comes up with the message as above, whenever the phone is turned on...
There is a sim card installed...
My carrier (virgin) say that they have unlocked the phone from optus.
How do I fix this?
thanks
Anushka

Virgin use the Optus network here in Australia - which is why, the 3G phones showed you connected to the Optus network, and not to the Virgin network...They don't have their own network, they piggyback on Optus - which is why it would show that it is locked to Optus!
They also said they would unlock my iPhone 4 - which has been done! So there's obviously something wrong with the phone...

New Iphone 4 factory unlocked: "No SIM" "Insert Valid SIM with no pin lock"

Hi, I'm new in the forum.
I've just bought a new factory unlocked Iphone 4 from a top rated seller in USA, came back to my country, inserted my Sim in the Iphone, and got the message:
"No Sim" "Insert valid sim with no pin lock to activate Iphone"
This Sim I was using in my old Iphone and actually in a Blackberry Storm.
After the message I put it back again in the BB, and it works fine.
But in the Iphone I get always this message.
One thing: My SIM is a regular one, and I had to use a tempalte available in the net to cut it into a micro SIM.
In the BB it keeps on working.
Any idea?
Thnak you
Luis

I answer your question: I buy a lot of things from ebay, and I just looked for "an original factory unlocked" one, assuming their are original, just that.
If I had known I could have bought it CHEAPER directly in Apple, I would have never done it in ebay! (I was told in my country that if you buy in the web, normally you get a discount, sound logic to me.
On the other hand I saw that this seller sold over 1000 Iphones and I trusted that's all.
I'm not dealing with phones, I sell art.
Anyway I still trust what is written there, that they are factory unlocked, and I'll try what you say tomorrow with my carrier: I'll buy a micro sd, and if it still doesn't work, I'll write this seller to see what's going on
Thanks for your advice
Luis

Hello, i tried to update my iPhone 3GS and it work and my phone switched back on but it says insert a valid SIM with no PIN lock, what do i do?

hello, i tried to update my iPhone 3GS and it work and my phone switched back on but it says insert a valid SIM with no PIN lock, what do i do?

http://support.apple.com/kb/ts3694#error29
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Insert a vaild SIM with no PIN lock to activate iPAD

PUK Locked
Insert a valid SIM with no PIN lock to active iPAD
Unlock

Your post is rather difficult to decipher. Please state a complete question so that we understand what it is you wish assistance with. Meanwhile, perhaps this will help:
http://support.apple.com/kb/HT1316
Regards.

I accidentally deleted all the files inside Quicktime, and now when I try to import to iMovie it won't let me...how do I fix this?

How do I get them back? It's from the Quicktime that already came with my Mac...please help me...It won't let me import movies to iMovie!!

What installer software package files? Could you tell me how to get there?
Afraid I'm not a mind reader. You have to download the installer packages from whatever source provides those installer packages. For instance, you would download the DivX installer package file from DivX. The Perian codec installer package would found at the Perian web site. QT "Pro" codec components installers may be include with older Motion or FCP Suite software or from the Apple site, etc., etc., etc. At this point all I know for sure is that that you have part of the DivX package installed and should reinstall the entire package if you plan to use it for anything.
Everyone's codec component configuration may be different depending on what codecs the need to use. Perhaps it would be easier if I provide an image showing the codec components installed on my Snow Leopard configured laptop:
This is a very basic set-up since I do most of my video work on my iMac which has FCP installed on it. In this case you can see:
a) AC3MovieImport.component (Apple)
b) AppleIntermediaCodec.component (Apple)
c) AppleMPEG2Codec.component (Apple)
d) Elgato Turbo.component (Elgato)
e) EyeTV MPEG Support.component (Elgato)
f) Flip4Mac WMV Advanced.component (Telestream)
g) Flip4Mac WMV Export.component (Telestream)
h) Flip4Mac WMV Import.component (Telestream)
i) Perian.component (Perian)
j) x264Encoder.component (MacUpdate)
The first three codecs were installed by my System Installer w/iMovie package (i.e., pre-installed on system when purchased or added afterwards by iMovie). The Elgato codec installers came with with my Turbo H.264 and EyeTV hardware devices. (I you don't have such devices, then you don't needcan't use these codecs.) The WMV codecs were purchased from Telestream. The Perian codec was a free download from the Perian web site and is used for DivX, XviD, 3ivX, DTS, AC3, MKV, FLV, and other audio/video/file type support. (I.e., I don't use the DivX package.) The X.264 codec is a leftover from my old Leopard system and not really used much anymore since I now prefer using HandBrake GUI for most X.264 custom encodes.
At this point, would assume you need to rerun the Snow Leopard/iMovie Installer if you purchased the system with system pre-installed or purchased the it as a system upgrade. Another alternative would be to find another Snow Leopard OS platform and simply copy the missing Apple iMovie codecs from a working system to your non-working system. All other codecs are up to you. Only you know what third-party codecs were installed on your system. And if you don't remember, you will probably find out what you are missing every time you try to play a video containing an unsupported codec.
Since you seem to be very inexperienced here, you may wish to consider joining a local user group or seeking some one-on-one assistance from someone in your local area.

PUK Locked insert SIM with no PIN lock to activate ipad

please invistage to me this matter

PUK locks are controlled by wireless carriers. Contact the source of the
sim to get the PUK or change the sim. Unless the iPad was purchased
as subsidized and therefore locked to a wireless provider, the iPad
should not be locked.

No SIM card Installed – Insert a valid SIM card with no PIN lock to Activate phone

How do i solve this problem?
No SIM card Installed – Insert a valid SIM card with no PIN lock to Activate phone

You do what the message instructs you to do and insert a Valid SIM with no PIN lock.

I have a used mac computer. I want to sync and update my iphone. Currently itunes tells me that my iphone is connected to a different itunes account. How do I make itunes sync and update my phone without deleting all the current information on my phone?

I have a used mac computer. I want to sync and update my iphone. Currently itunes tells me that my iphone is connected to a different itunes account and will sync, but delete everything from my phone. How do I make itunes sync and update my phone without deleting all the current information on my phone?

Iphone will sync with one and only one cpomptuer at a time. Syncing to another will erase the current content and replace with content from the new computer. This is the design of the iphone.
It will erase the content when you sync.
Why not update from the comptuer with which you normally sync?

I have 2 iphones, one for personal and one for business. I need my phones not to sync otherwise they will both ring all the time. How can I log out of my icloud and unsync my phones?

I have 2 iphones, one for personal and one for business. I need my phones not to sync otherwise they will both ring all the time. How can I log out of my icloud and unsync my phones?

Syncing your phones to the same iCloud account won't cause them to both ring all the time, it only puts the same contacts, calendars, and other synced data on the phone. The phones will only ring with someone calls the number associated with the phone.
If you want to stop using iCloud on one or both of the phones, go to Settings>iCloud, tap Delete Account, then choose Keep On My iPhone when prompted. This will disconnect them from iCloud and keep a copy of the synced data on the phone.

I have purchased apps in the past and now every time I download a new app my IPad notifies me that they cannot be purchased at the time. For example, tap tap revenge and 11 others cannot be purchased at the time. How can I get rid of it?

I have purchased apps in the past and now every time I download a new app my IPad notifies me that they cannot be purchased at the time. For example, tap tap revenge and 11 others cannot be purchased at the time. How can I get rid of it. Can anybody help?

The application iExplorer may be useful in your situation. Read these links below
I found this in another long discussion (on the ASC site) about this very same problem that you are having.
http://www.blog.gleff.com/2012/03/app-store-unable-to-purchase-fix/
This is the discussion.
https://discussions.apple.com/thread/3681763?start=45&tstart=0

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

I don't get what you are saying.
Is this all the same document?
What version of Pages?
Have you tried to revert to a previous version?
Peter

HT2731 i hav iphone and i restart it and delete all the files inside how can i start again my iphoe it say i need a valid sim with no pin lock to activate it again pls help

Similar Messages

Maybe you are looking for