HT2736 Can I give a digital subscription in the Newstand as a gift?

Is it possible to gift a subscription to a Newstand periodical?  I want to give someone a subscription to The New Yorker but can only see how to gift apps, books, music, etc., but not subscriptions which are a form or in-app purchase...

Sure you can, but it's a bad idea, as if something went wrong with the device it would have to be sent back to the US for service.
Just buy them a gift card for use toward a new phone

Similar Messages

  • Can I give access to ICQ through the Oracle Messenger client?

    Can I give access to ICQ through the Oracle Messenger client, is similar JIT in Jabber?

    you can try, but it will not be supported by Oracle Support.

  • How can i give a dedicated domain to the wiki

    How can i give a dedicated domain to the wiki eg. wiki.mydomain.com instead of server.local/wiki
    Trying to get rid of the /wiki can this be done outside of editing the apache conf file.

    You're on your own with this:
    How to Enable Wiki Services on Multiple Virtual Hosts with Mountain Lion Server

  • Can somebody give me an appreciation of the crp8337 owc bluetooth keypad matching the Apple bluetooth keyboard?

    Can somebody give me an appreciation of the crp8337 owc bluetooth keypad matching the Apple bluetooth keyboard?

    You can upgrade memory and the hard drive. Nothing else is user-upgradeable. All processors are soldered to the motherboard.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
    You can see HDD and SSD options at OWC. Reliable RAM vendors are OWC, DataMem, and Crucial.com.

  • HT2736 Can I give a season pass as a gift?

    Can I give a season pass as a gift?  It appears that I can give the specific episodes of a show, but not a season pass to the show.  If I cannot give a season pass, why not?  Is there some reason Apple will let me buy one for myself, but not someone else (apart from 'we dropped the ball')?

    Yes you can switch. Don't let anybody tell you otherwise, I just changed from Canada to US even though I had an active season pass and iTunes Match. Call Apple support and they will help you: http://support.apple.com/kb/HE57
    My season pass and Match account have been cancelled by the way, I have to pay again to re-open these.

  • How can i give multiple paragraph styles on the same line

    i want to give different paragraph style in the same line in an indesign document. bt when i tried it, it is coming in two different line.
    actually i am doing a project in which Frame maker document is transformed into indesign document. in frame maker this is possiable, but in indesign i cannot give different paragraph style in the same line of the document.
    Is there any way to do this ????

    YaneshTyagi wrote:
    i want to give different paragraph style in the same line in an indesign document. bt when i tried it, it is coming in two different line.
    actually i am doing a project in which Frame maker document is transformed into indesign document. in frame maker this is possiable, but in indesign i cannot give different paragraph style in the same line of the document.
    Is there any way to do this ????
    Hi, Yanesh:
    Please understand, the FrameMaker feature known as a run-in paragraph, which is a paragraph with a "carriage return" but without a "line feed," HAS NO COUNTERPART in InDesign. InDesign also lacks the FrameMaker side heading feature, which is created by the combination of a reserved area in the text frame and the paragraph property to inhabit that area. FrameMaker separates paragraphs by using the larger of space below paragraph and space above paragraph, but InDesign separates paragraphs by adding the space below paragraph and the space above paragraph.
    There are several complicated manual methods of simulating these FrameMaker properties in InDesign.
    Here's a recent forum discussion of these exact issues: http://forums.adobe.com/message/3759635#3759635. The thread mentions DTP Tools' conversion tool, the MIF Filter commercial plug-in for InDesign, and discusses its shortcomings. I don't recall it mentioning in-tools.com plug-ins that can simulate side headings, like those in FrameMaker, but they don't convert FrameMaker to InDesign. 
    You can add your vote for InDesign's developers to include these FrameMaker features, and any others you'd like to see, here: wish.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • HT1539 my daughter has taken the insert page with redemption code out of the dvd case and we cannot find it.  is there any way i can still download my digital copy of the movie in itunes?

    We Have managed to lose the insert page that came with our dvd and digital copy.  Is there a way i can still download the digital copy without the redemption code?

    Please please help me, if you know how.

  • Can anyone give me exact answer of the following questions???

    what is NACE and for what it is used?
    what is output types?
    what is message type?
    what is need of configuring the output type and message type and why???
    How can u add the field in standard table and how can u make data flow into table field in that standard table field???
    Regards,
    Nirav Parekh

    Hi
    Output type and Message Type Both are same
    NACE is the Tcode used to link the Application type, Output Types and its processing Routines like ( Driver programs and attached Script forms or Smartforms).
    You should know the Application of a document first Like:
    for PO it is EF, for sales Doc's it is V1, for Delivery docs it is V2, for billing Doc's it is V3 etc.
    so first select the Application type (ex: EF) for PO and press OUtput types
    then a list will come in that you should know the related output type for PO.
    in this case it is NEU,
    select that and click on the processing Routines button on the left side
    it will display the Medium, Driver Program and the Script form or smartform related to that document..
    Output is a link between the Driver Program and the Sapscript,
    An output type summarizes messages of the same meaning. It contains parameters that are valid for all its assigned messages, for example appropriate partner functions.
    Transmission medium is a medium which the layout will be come out, this may be printout, Fax or Mail
    Check this link.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19884743b111d1896f0000e8322d00/content.htm
    ex-how to config output type.
    You will assign output types using Transaction NACE.
    Do the follow steps to assign output type
    1)Select Application Type V2 which will have description Shipping.
    2)Click on Output types button.
    3)Go to change mode by pressing Ctrl+F4.
    4)Select one output type which already exists
    5)Do Copy As(F6)
    6)Give your output type against Output Type field.
    7)Under General data Tab, Give Program and Form routine and Save the data.
    i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
    Output Determiantion :
    You can use output control to automate either messages or subsequent processing of partner-specific messages"
    This means, it provides a method for you to perform subsequent processing once a document is saved in the system. This subsequent processing is normally to print the document, but can also include activities such as:
    - Faxing the document
    - Emailing the document
    - Sending an idoc of the document
    - Sending an EDI message for the document (via an Idoc)
    - and so on.
    In general, it uses the condition technique to determine what, if any, output is to be produced. The condition technique works by selecting key fields from the document (document type, plant, etc.) and matching them to master data records you have previously set up. If there is a match, then output is produced.
    You can use transaction NACE for the output determination settings for all applications.
    1. When you start transaction NACE, a list of all represented applications appears.
    2. From this initial screen, you can access all the individual processing screens for output determination from the EDIT menu.
    3. Select the relevant application. This transaction does not have a menu path in customizing.
    Refer the following links.
    http://help.sap.com/saphelp_crm40/helpdata/en/b3/58bf39f7568648e10000000a11402f/content.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/c8/19878343b111d1896f0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/c0/4e4746497d11d385ee0000e81ddea0/content.htm
    Check the following documentation
    In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
    If suppose data can be read from EDI then we should go for condition records.
    So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
    Go to the Transaction NACE.
    choose the related sub module.. like billing or shipping
    doubel click on Output Types
    Choose the Output Type for which whcih you wanted your script to trigger
    Then select the Output Type and double click on Processing Routine
    Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
    Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
    Device Types for SAP Output Devices (Detail Information)
    Definition
    The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
    The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
    You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
    How do I choose the correct device type?
    • In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
    These standard device types are completely defined and need no modification or extension before you use them in device definitions.
    • You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
    • Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
    • Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
    • If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
    Attributes of a Device Type
    A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
    • Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
    • Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
    • Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
    • Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
    • Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
    • Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
    Using the APPend structure in the menu of SE11 Table we can add new fields into table
    and these two new fields are to be placed on a screena nd are to be populated along with the transaction data from the related transaction of that table.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Everything runs als Root, can someone give me a hand for the system rights?

    yeah I screwed up big times because of this neat unknow_user "Feature" in Leopard.
    First i installed a os 10.4 app under leopard which let the disk utility slow down and the finder crashes if i change the user rights, and then i changed globally the group and user of everything in the application folder and my documents folder with pathfinder for looking if i can solve the problem that way.
    -But now everything runs as Root and even the hd itself has a owner root and as group admin.
    i don't get the difference between system, root, admin, wheel, username for the owner and group. I googled but found nothing clear about this.
    And i also wonder what i should do about the group and the meaning of root, system, admin, wheel, username as a group for a single user system. Where should i give a read, read&write and execute permission for example?
    at the moment everything seems to run mostly root and every program runs on root and i think this is the worst think that can happen and causes some trouble for the programs.
    Can someone give me a short hand and for example tell me if i should set the hd owner to my username and the group to system or admin or whatever and this also for the application and documents/film and other stuff on my user folder?
    that would be great
    I think i have to reinstall leopard, but as long as this unknow_user problem still resist and no patch is available, i see the same thing happen again and again for me, so a little help would be great
    here the ls -l -a from the system and user directory
    drwxrwxr-t 26 root admin 1496 Nov 1 23:41 .
    drwxrwxr-t 26 root admin 1496 Nov 1 23:41 ..
    -rw-rw-r--@ 1 root admin 15364 Nov 5 22:42 .DS_Store
    drwxrwxr-x@ 3 root admin 102 Oct 30 18:40 .Spotlight-V100
    drwxrwxr-x@ 2 root admin 68 Aug 2 12:29 .Trashes
    -rw-r--r-- 1 root admin 0 Oct 30 17:09 .com.apple.timemachine.supported
    drwx------ 2 root admin 952 Nov 5 22:09 .fseventsd
    -rw-rw-r--@ 1 root admin 262144 Oct 10 11:42 .hotfiles.btree
    drwxr-xr-x@ 2 root wheel 68 Aug 2 12:30 .vol
    drwxrwxrwx+ 400 adrian admin 13872 Nov 5 22:00 Applications
    drwxr-xr-x 2 root admin 102 Nov 1 23:01 Data
    -rw-r--r--@ 1 root admin 10240 Oct 25 05:19 Desktop DB
    -rw-r--r--@ 1 root admin 37442 Oct 25 01:39 Desktop DF
    drwxrwxr-x@ 13 root admin 544 Oct 30 19:46 Developer
    drwxr-xr-x 5 adrian adrian 204 Sep 12 14:25 InputManagers
    -rw-r--r--@ 1 adrian adrian 1568128 Nov 1 23:45 Installer Log File
    drwxrwxr-t+ 60 root admin 2108 Nov 1 22:06 Library
    drwxr-xr-x@ 2 root wheel 68 Aug 2 10:08 Network
    drwxr-xr-x 3 root wheel 136 Oct 30 18:01 System
    drwxrwxrwx@ 3 root admin 102 Aug 2 17:21 TheVolumeSettingsFolder
    drwxr-xr-x 5 root admin 238 Nov 2 00:03 Users
    drwxrwxrwt@ 4 root admin 170 Nov 5 20:21 Volumes
    -rw-r--r-- 1 adrian admin 0 Oct 29 22:51 az.log
    drwxr-xr-x@ 2 root wheel 1360 Oct 30 17:57 bin
    drwxrwxr-t@ 2 root admin 68 Jan 13 2006 cores
    dr-xr-xr-x 2 root wheel 512 Nov 2 04:11 dev
    lrwxr-xr-x@ 1 root admin 11 Oct 30 17:57 etc -> private/etc
    dr-xr-xr-x 2 root wheel 1 Nov 2 04:11 home
    lrwxr-xr-x 1 root 502 11 Nov 1 22:40 mach -> mach_kernel
    -r--r--r--@ 1 root admin 615748 Oct 29 18:23 mach.sym
    -rw-r--r--@ 1 root wheel 10243756 Oct 10 06:38 mach_kernel
    -rw-r--r--@ 1 root wheel 10696809 Oct 10 06:38 mach_kernel.ctfsys
    dr-xr-xr-x 3 root wheel 2 Nov 2 04:11 net
    drwxr-xr-x@ 3 root admin 102 Sep 14 17:40 opt
    drwxr-xr-x@ 6 root wheel 204 Oct 29 18:23 private
    drwxr-xr-x@ 2 root wheel 2244 Oct 30 18:01 sbin
    drwxr-xr-x 11 root admin 374 Jun 9 2006 sw
    lrwxr-xr-x@ 1 root admin 11 Oct 30 17:57 tmp -> private/tmp
    drwxr-xr-x@ 13 root wheel 510 Oct 30 19:52 usr
    lrwxr-xr-x@ 1 root admin 11 Oct 30 17:57 var -> private/var
    and for the my user folder:
    drwxr-xr-x+ 22 adrian adrian 1156 Nov 3 02:30 .
    drwxr-xr-x 5 root admin 238 Nov 2 00:03 ..
    -rw-r--r-- 1 adrian adrian 3 Sep 13 22:41 .CFUserTextEncoding
    -rw-r--r--@ 1 adrian adrian 15364 Nov 5 21:50 .DS_Store
    -rw-r--r-- 1 adrian adrian 11 Oct 16 17:17 .PortAuthority2.4.rc
    drwx------ 2 adrian adrian 68 Nov 5 20:58 .Trash
    -rw-r--r-- 1 adrian adrian 0 Aug 16 04:37 .Xauthority
    -rw-r--r-- 1 adrian adrian 2552 Nov 5 22:43 .bash_history
    drwxr-xr-x 4 adrian adrian 136 Aug 17 21:11 .config
    drwxr-xr-x 8 adrian adrian 306 Aug 6 02:22 .dvdcss
    drwxr-xr-x 2 adrian adrian 578 Oct 21 19:32 .fontconfig
    -rw-r--r-- 1 adrian adrian 489724 Aug 30 17:49 .fonts.cache-1
    drwxr-xr-x 2 adrian adrian 68 Sep 14 17:40 .macports
    -rw-r--r-- 1 adrian adrian 1643 Aug 30 19:01 .mime.types
    -rw-r--r-- 1 adrian adrian 47 Oct 12 22:45 .parallels_settings
    -rw-r--r-- 1 adrian adrian 194 Sep 28 02:52 .profile
    drwxr-xr-x 3 adrian adrian 102 Sep 23 00:48 .stella
    drwxr-xr-x 2 adrian adrian 68 Aug 16 20:09 .wapi
    -rw-r--r-- 1 adrian adrian 467 Nov 5 04:21 .webaom
    -rw-r--r-- 1 adrian adrian 570 Aug 16 04:37 .xinitrc
    drwxr-xr-x 3 adrian adrian 170 Aug 5 08:10 Applications
    drwxr-xr-x+ 23 adrian adrian 1190 Nov 5 20:21 Desktop
    drwxrwxrwx+ 35 adrian adrian 2210 Nov 5 22:08 Documents
    drwxr-xr-x+ 14 adrian adrian 3332 Nov 5 20:02 Downloads
    drwxr-xr-x+ 48 adrian adrian 1836 Oct 30 19:11 Library
    drwxr-xr-x+ 9 adrian adrian 748 Nov 2 23:49 Movies
    drwxr-xr-x+ 8 adrian adrian 510 Sep 29 05:44 Music
    drwxr-xr-x 2 root adrian 68 Nov 3 02:30 New Folder
    drwxr-xr-x+ 6 adrian adrian 748 Oct 18 23:26 Pictures
    drwxrwxrwx+ 3 adrian adrian 238 Nov 4 20:34 Public
    drwxr-xr-x+ 3 adrian adrian 204 Aug 14 21:29 Sites
    drwxr-xr-x 3 adrian adrian 340 Oct 31 05:55 CompilationUnix
    -rw-r--r-- 1 adrian adrian 129 Oct 6 16:48 license.jai

    lllaass wrote:
    lizdance40, did you read the original post? The poster's problem is that when he connects the iPod to his computer the iPod does not appear in iTunes. He does not say he has a wifi problem with his iPod.
    lizdance40 wrote:
    You need to do an update on your router's firmware, or get a higher speed router..
    Or replace the router and or modem.  High demand can burn out a router in 2 years.  Typical life is about 4-5 at most.
    The new iPod is more advanced and if your router is slow or inconsistant signal your iPod will stop trying to connect to save your battery.
    of course he dose have a wifi problwm. read the last line of the original post

  • HT4098 I am trying to cancel a digital subscription within the 24 hour period per the e-mail notice.  Please advise.

    I am trying to cancel my magazine subscription within the 24 hours as stated in e-mail notice.  No option in manage subscriptions.

    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • How can I turn off my subscription to The Times UK

    Have managed to turn off my subscription to The Sunday Times but am still being charged for the Times. How do I turn off?

    http://support.apple.com/kb/HT4098
    If that doesn't help, you'll probably need to contact customer support for The Times.
    Regards.

  • Can i control a digital photocamera trough the USB with Labview

    i want to control my digital photocamera with labview, so that i can take a picture on a labview command.

    NeoVista (www.nvsi.com.au) has an excellent toolkit for controlling Kodak digital cameras - maybe they could help?
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • Can someone give me, in simple terms, the steps to Export a PDF to Word?

    I have spent hours on the phone with Adobe. I am technically challenged. When I used to pull up a PDF, I could use Tools to do this. It now asks me to login and when I do it says there was an error. When I retry, I get nothing..the submit button never responds when I tap it. Thanks for any help.

    This is the Reasder forum. If you have a subscription to ExportPDF, the place to post your question is this:
    http://forums.adobe.com/community/exportpdf

  • Can you get a digital clock for the nano?

    Cant find it anywhere!

    Not at this time.  You can provide feedback to Apple for it using this link.
    http://www.apple.com/feedback/ipodnano.html
    B-rock

  • Can anyone give me some link about the axample about the tree

    Dear All:
    I am learning something about the tree, is there any one can provide a link about a an example for tree node deletion /add?
    and I also need an example about drop and drag a node from the tree too.
    Thank you very much !

    Start with this section from the Swing tutorial on "How to Use Trees":
    http://java.sun.com/docs/books/tutorial/uiswing/components/tree.html
    The Swing Connections has a couple of articles that might help:
    http://java.sun.com/products/jfc/tsc/articles/

Maybe you are looking for