HT2736 How do I find out the status of a iTunes card I gifted to another person via email?

I used the option in the iTunes Store to buy a gift card for a friend.  I did this three days ago, and the email with the code has not yet arrived, nor have I received a confirmation from iTunes.  When I look at the history in the Store, there is no way to check on the status.  The whole idea was to get the gift to my friend quickly.  Three days isn't quick...

Welcome to the Apple community.
When you purchase a gift card for another person, it is usually delivered instantaneously by email. If that email has not arrived, then check your Your Purchase History.
If you do not see the gift card in your purchase history, there is a good chance you have purchased it incorrectly and it has not been sent.

Similar Messages

  • How can i find out the balance of a itunes gift card without redeeming it?

    How can i find out the balance of a itunes gift card without redeeming it??

    Hello,
    You can get more information regarding to your problem here : http://support.apple.com/kb/ht5035
    All the best !

  • How do i find out the status of the ink in the HP 5510 machine?

    Please can you advise how i find out what the status of the ink is in the "HP 5510" machine?

    Hi,
    Please use this:
    From the Printer Home screen, touch the right directional key, and then touch the Ink icon to display the estimated ink
    levels.
    Regards,
    Note: The ink icon is similar to a drp\op of water.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I find out the size of my iTunes library in iTunes 11?

    Need to find out so I can deem which model of iPhone 5 is suitable when I upgrade at the weekend, but the info bar at the bottom of the window has disappeared and quite frankly, I'm clueless.
    UPDATE: Found the answer.

    There are no such totals at the bottom of the window. How can that be? I'm using iTunes 7.6.
    However, I did navigate to the music folder and found my library was 12.65G. I have a 100 gig hard drive and something is using up a 99 gig. The only other program on my computer that has a lot of memory use is iPhoto - about 11,184 photos.
    I don't know if this is the correct place to ask this, but how can I look at the contents of my Hard drive in detail and see a list of each item in it and how much memory each item is using? And the totals involved? I get the feeling there is something in my hard drive that is taking up most of the space, but I don't know what it is.
    Thank you for your reply.
    Robert Mason

  • How do I find out the size of my iTunes library?

    Please spell it out for me.
    Thanks

    There are no such totals at the bottom of the window. How can that be? I'm using iTunes 7.6.
    However, I did navigate to the music folder and found my library was 12.65G. I have a 100 gig hard drive and something is using up a 99 gig. The only other program on my computer that has a lot of memory use is iPhoto - about 11,184 photos.
    I don't know if this is the correct place to ask this, but how can I look at the contents of my Hard drive in detail and see a list of each item in it and how much memory each item is using? And the totals involved? I get the feeling there is something in my hard drive that is taking up most of the space, but I don't know what it is.
    Thank you for your reply.
    Robert Mason

  • HT4489 How do you find out the size of a contact card?

    The old Mobile Me service had lots of issues with the number of contacts you could have. Now it seems that with this info: http://support.apple.com/kb/HT4489
    iCloud: Limits for Contacts, Calendars, Reminders, and Bookmarks
    Apple has tried to inform us about the limits you can have. None the less it does not tell you how to ( for instance) know the size of the memory taken by ( contacts). So they have given us guidance but no way to know how to use it or check it. Can anybody advice how to measure the size of contacts ( for instance).? For business users this could be important. Thanks in advance for any assistance. Guy M.

    Address Book's own database will be differently structured from an exported vCard so it's not really worth tampering with that.
    The vCard is a series of fields separated by line returnes, with records being separated by BEING:VCARD and END:VCARD - a typical single simple card looks like this:
    BEGIN:VCARD
    VERSION:3.0
    N:National Film Theatre;;;;
    FN:National Film Theatre
    ORG:National Film Theatre;
    TEL;type=WORK;type=pref:020 7928 3232 booking
    TEL;type=WORK:020 7928 3535 prog planning
    TEL;type=WORK:020 7815 1335 tech
    TEL;type=WORK:020 7928 3233 booking
    item1.ADR;type=WORK;type=pref:;;The Box Office\, BFI Southbank\nBelvedere Road\nSouth Bank;London;;SE1 8XT;
    item1.X-ABADR:gb
    X-ABUID:A1345405-E248-4B2B-906B-F5AFA5BF15CB\:ABPerson
    END:VCARD
    As you can see it's only a small amount of data - 464 bytes - so really I don't think you need to worry about the size of any individual entry except where photos are concerned - obviously they take up a lot more room. I checked a card with a typical small photo and the size was 5,137 bytes: so only quite a large photo is going to cause you any problems.
    I don't know of any way of collecting statistics on the all-contacts vCard, except that if you converted it to a tab-delimited format and imported it into a spreadsheet or database program it would tell you the number of contacts.

  • How can I find out the status of my podcast feed submission?

    I submitted a podcast feed for approval 2 1/2 weeks ago. I've yet to get an approval. I got the acknowledgement email. I followed up a week ago; and they asked me to send my feed to them again for reference. Nothing. As many podcasts as they have, it seems Apple could do a lot better than sending requests into a black hole. 
    I don't have any profaniity or music under copyright in it. I"m doing reviews of a TV show so I kinda need to get going here.
    I did a podcast a couple of years ago, and it seems I got approval in like 48 hours. Super frustrated. If anybody knows how to get a status or ETA out of Apple I'd love to hear it. Thanks.

    You are not alone. A number of people have complained of a long delay after a submission is accepted. I'm afraid there isn't much you can do about it. You could try emailing support at podcasts 'at' apple.com, but you may just get a form answer telling you how to submit a podcast, which you already know.

  • How do i find out the temp of my macbook

    how do i find out the little stuff like that?

    Many people use CoreDuoTemp:
    http://macbricol.free.fr/coreduotemp/
    But there are a number of utilities to use, including istatpro for your dashboard:
    http://www.apple.com/downloads/dashboard/status/istatpro.html
    Also, check here for more:
    http://osx.hyperjeff.net/Apps/

  • Hw to find out the status of the program...? like active / inactive?

    Hi kindly let me know how to find out the status for the programs (like active / inactive).
    I have 100’s of zprograms; I want to know at a time which are all active and which are all inactive.
    I heard some table is there, but don’t know exactly, let me know if you have any idea…
    Akshitha.

    Hi akshitha,
    1. Active and Inactive status is stored in table REPOSRC.
    2.  Just goto that table in SE11/SE16,
         and enter (copy/paste) the list of your 100 programs.
    3. <b>In that there is a field R3STATE
       Where A= Active
                 I = Inactive</b>
    From there u can filter as per ur requirement.
    regards,
    amit m.

  • How can I find out the dpi of an image in Acrobat.

    How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

    Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
    That opens a panel on the right.
    To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
    Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

  • How can I find out the overall time and not only the time of a single clip?

    I have set up two cameras in one room. Both cameras record the same thing from different perspectives at the same time. I have found an interesting scene for video 1 (recorded by camera 1). Now I would like to find the time at which the interesting scene takes place in video 2.
    However, I have not seen any way to get displayed, at what time the scene starts in relation to the total length of the video (e.g: scene starts after 5 minutes from total 10 minutes).
    The indicated time refers only to a part of the clip and not to the overall project, even if a special clip is not selected. Does anyone know, how I can find out the time?

    Go to Settings>iCloud>Storage & Backup.  It will be shown just below the Back Up Now button at the bottom.

  • How can you find out if another VI running on the same computer and how can you find out the name of that VI?

    Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
    If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone? 

    I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them.  I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
    I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory.  I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods.  [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
    I think you could adopt this idea to do what you need.
    BS

  • How can I find out the mail server from email address?

    Hi:
    How can I find out the mail server from email address?
    for example: If I know the email address is [email protected],
    how to find the pop3 and smtp mail server?
    THANK YOU

    You can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
    The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
    Sean

  • How can I find out the screen size of the users moniter using the Acrobat SDK?

    How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
    Thanks,
    Gregory

    Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
    Gregory

  • How can i find out the more than one times occurance of integer in a array?

    How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

    Kumar_Mohan wrote:
    How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
    Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

Maybe you are looking for

  • SAP BPC 7 APPSet Restore SQL 2005

    Hi Everyone, I have SAP BPC 7 setup in a multi-server environment, and it's working well. I created a dev environment, installed SAP in the same fashion, and now when I try to restore an app set through server manager in dev, it keeps putting the SQL

  • Integration issue in mm

    Dear sap gurus, in obyc i had assign trasaction event key bsx in this one i assigned to stock account and i create one account gr/ir this one i asigned to wrx, i created one 4% tax this one assigned to ob40. after gr/ir (migo) stock a/c dr 100 to  gr

  • Scrollbar for content in Lightbox?

    Added some images to a lightbox. When the lightbox content is larger than the browser screen size no vertical scroll bar is shown in the browser, so you can't scroll the content, which kinda renders it useless. How do I get the scrollbar to appear? A

  • Unix command to turn OFF Software Update

    I've browsed through the networksetup -help and the systemsetup -help files and can't find anything that would allow me to send a unix command that would turn automatic software update off? Anyone got any thoughts?

  • Develop to Library

    When I sharpen an image in Develop, the changes do not stay when I go to Library.  How do I fix the changes?