HT2736 How is it delivered and how do I know if has got there?

If I gift an App,....
How do I know it has been delivered and how do I know it has got there?
Do I get an email or message?

You can try reaching out to iTunes support and see if they can tell you if a purchased code has been redeemed or not, but I don't know if they track that.
I'm guessing you cannot ask the gift receiver?
iTunes Support

Similar Messages

HT204053 there is a new email on my phone apple id when I try to make an app purchase my own apple id does not work. How does this happen and how can I change it back?

There is a new email address on my phone in the apple id password box. My password will not work. How did this happen and how can I change it back?

Of course your password shouldn't work on a different Apple ID. This can happen for many reasons, no worries, just sign out back back in using your own ID.
iOS: Changing the signed-in iTunes Store account
http://support.apple.com/kb/HT1311

When I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?

when I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?

Does the iPod connect to other networks?
Do other device connect?
Did the iPod connect to this network before?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
To help avoid future transgressions set the Restrictions for In-App Purchases...
Settings > General > Restrictions
Understanding Restrictions > http://support.apple.com/kb/HT4213

How to enable RFC and how to use it in Report..please tell its very urgent

Dear Techie's,
Please tell its very urgent..
How to enable RFC and how to use it in Report. ??
Virendra

hi,
pls chk any of these links.
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
rgds
Anver

I need information on how Adobe Drive works and how to set it up

Hey folks,
believe it or not, but I have been searching a lot on the web already on how to find information how Adobe Drive works and how to set it up.
Most information that I found is old and seems to be valid only for older versions of Creative suite. Here in the company we use CS5.5 and will switch to CS6 soon.
I already downloaded Adobe Drive 3 and installed it on my Mac. Unfortunately I don't know what to do next? Do I need Adobe CQ to make it work? Or can I use it with an existing SVN infrastructure, that we have here? Actually I would like to access the SVN via Adobe Bridge. But after the installation of Adobe Drive my Bridge CS5.5 is crashing while starting up, and I didn't find out how to fix this again.
Actually I just found the manual for Adobe Drive 3 and read it. Seems to be easy in case its working. But it's not in my case, as mentioned above.
Any idea what could be the problem?

Thanks,
in the meantime I managed to re-setup Adobe Drive 3 again. Bridge CS5.1 is still crashing (i have a log-file with a detailed error-report, if somebody knows how to extract information from this.
At least now I can start Drive as a standalone application.
So now my main question is how to connect Drive 3 to our subversion infrastructure in the company. Does anybody have information on this?

How do I edit and save a word document that has been e-mailed to my ipad

How do I edit and save a word document that has been e-mailed to my ipad and then re-send

Use the paid version (install and activate) of Microsoft Word.
https://itunes.apple.com/sg/app/microsoft-word-for-ipad/id586447913?mt=8

In Mac Mail on OS 10.5.8 I am receiving bogus emails which claim to be sent by people in my address book, but actually are not. How does this happen and how can I correct this problem

n Mac Mail on OS 10.5.8 I am receiving bogus emails which claim to be sent by people in my address book, but actually are not. How does this happen and how can I correct this problem

You said:
I am receiving bogus emails which claim to be sent by people in my address book, but actually are not.
...and:
Are you saying that my address book has not been hacked into? That others are getting these email addresses from another source?
This confuses me. Are you saying that you are receiving bogus e-mails from some of your contacts, or are you saying that they are receiving bogus e-mails from you?
If the latter, there are a number of reasons that people might be getting e-mail from you. Malware, though technically possible, is extremely unlikely. See Someone is sending messages from my e-mail address!
If the former, that's rather unusual. The only decent explanation I can think of is that a bunch of your Windows-using contacts got infected with something and their machines are being used to spam everyone in their contact lists, which would include you.

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

How to download itunes and how to use windows in my iPad?

How to download itunes and how to use windows in my iPad?

The iTunes app comes pre installed on your iPad.
Use Windows? The iPad is an iOS device. Not possible to run Windows on an iPad.

My mother contacts disappear when she sends a message or call someone, how is this possible and how to fix it?

My mother contacts disappear when she sends a message or call someone, how is this possible and how to fix it?

Technically the limit of 4Gb per folder should have been removed in a recent patch. Personally I an unconvinced as the developers have said so twice before and something else arose to bite people at 4Gb. So the limit probably does not exist anymore and moving mail and compacting will fix it without data loss if it occurs as recent issues have been about displaying mail after the 4Gb point, not storing it.
Use the Ctrl and Shift keys in conjunction with your mouse to make multiple selections.
click followed by Shift+ Click selects everything between the two clicks, including the items clicked.
Holding the Ctrl key while clicking allows you to select or deselect mail to either fine turn the list from shift clicking or to make one of your own.
Ctrl +A selects everything in the list from the current selection to the end.
One option is create an important folder and move your important stuff to it then ctrl +A the whole remaining inbox.

WHAT are tokens and how it is issued and how it is viewed and solved by who

WHAT are tokens and how it is issued and how it is viewed and solved by who
points will be awarded

Hi Jagrut,
If you are talking of support token then,
TOKENs are nothing but the issues faced in the actual live system(Production).
So the end user who is facing will raise it, it will be assigned to the production support team and they will solve it.
Regards,
Atish

TS4147 I updated my iphone yesterday. I have the 4S. I have my daughters and mine contacts now. I don't want hers. How did that happen and how do I get rid of them?

I updated my iphone yesterday. I have the 4S. I have my daughters and mine contacts now. I don't want hers. How did that happen and how do I get rid of them?

This happens with you are both syncing data such as contacts on your devices with the same iCloud account. This will result in the data being merged and synced back to all connected devices. To correct this you need to have different iCloud accounts on each device.
To do this, on the device that will be changing iCloud accounts go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on the iPhone. After everything is turned off, scroll to the bottom and tap Delete Account. (This will only delete the account from the phone, not from iCloud, so the other phone won't be effected by this.) Next, set up a new iCloud account using a different ID, then turn data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to your new account. At this point you will have two separate iCloud accounts on each phone with identical data.
Next, you'll have to go to icloud.com on your computer and sign into each iCloud account separately and delete the unwanted data (for example, deleting her contacts from your iCloud account and vice versa). These changes will be reflected on each device and things should now be fixed.

How to find Latch and what actions need to be taken when there is a latch

Hi
Can you please tell me how to find Latch and what actions need to be taken when there is a latch?
Thanks
Regards,
RJ.

1. What is a latch?
Latches are low level serialization mechanisms used to protect shared
data structures in the SGA. The implementation of latches is operating
system dependent, particularly in regard to whether a process will wait
for a latch and for how long.
A latch is a type of a lock that can be very quickly acquired and freed.
Latches are typically used to prevent more than one process from
executing the same piece of code at a given time. Associated with each
latch is a cleanup procedure that will be called if a process dies while
holding the latch. Latches have an associated level that is used to
prevent deadlocks. Once a process acquires a latch at a certain level it
cannot subsequently acquire a latch at a level that is equal to or less
than that level (unless it acquires it nowait).
2. Latches vs Enqueues
Enqueues are another type of locking mechanism used in Oracle.
An enqueue is a more sophisticated mechanism which permits several concurrent
processes to have varying degree of sharing of "known" resources. Any object
which can be concurrently used, can be protected with enqueues. A good example
is of locks on tables. We allow varying levels of sharing on tables e.g.
two processes can lock a table in share mode or in share update mode etc.
One difference is that the enqueue is obtained using an OS specific
locking mechanism. An enqueue allows the user to store a value in the lock,
i.e the mode in which we are requesting it. The OS lock manager keeps track
of the resources locked. If a process cannot be granted the lock because it
is incompatible with the mode requested and the lock is requested with wait,
the OS puts the requesting process on a wait queue which is serviced in FIFO.
Another difference between latches and enqueues is that
in latches there is no ordered queue of waiters like in enqueues. Latch
waiters may either use timers to wakeup and retry or spin (only in
multiprocessors). Since all waiters are concurrently retrying (depending on
the scheduler), anyone might get the latch and conceivably the first one to
try might be the last one to get.
3. When do we need to obtain a latch?
A process acquires a latch when working with a structure in the SGA
(System Global Area). It continues to hold the latch for the period
of time it works with the structure. The latch is dropped when the
process is finished with the structure. Each latch protects a different
set of data, identified by the name of the latch.
Oracle uses atomic instructions like "test and set" for operating on latches.
Processes waiting to execute a part of code for which a latch has
already been obtained by some other process will wait until the
latch is released. Examples are redo allocation latches, copy
latches, archive control latch etc. The basic idea is to block concurrent
access to shared data structures. Since the instructions to
set and free latches are atomic, the OS guarantees that only one process gets
it. Since it is only one instruction, it is quite fast. Latches are held
for short periods of time and provide a mechanism for cleanup in case
a holder dies abnormally while holding it. This cleaning is done using
the services of PMON.
4. Latches request modes?
Latches request can be made in two modes: "willing-to-wait" or "no wait". Normally,
latches will be requested in "willing-to-wait" mode. A request in "willing-to-wait" mode
will loop, wait, and request again until the latch is obtained. In "no wait" mode the process
request the latch. If one is not available, instead of waiting, another one is requested. Only
when all fail does the server process have to wait.
Examples of "willing-to-wait" latches are: shared pool and library cache latches
A example of "no wait" latches is the redo copy latch.
5. What causes latch contention?
If a required latch is busy, the process requesting it spins, tries again
and if still not available, spins again. The loop is repeated up to a maximum
number of times determined by the initialization parameter SPINCOUNT.
If after this entire loop, the latch is still not available, the process must yield
the CPU and go to sleep. Initially is sleeps for one centisecond. This time is
doubled in every subsequent sleep.
This causes a slowdown to occur and results in additional CPU usage,
until a latch is available. The CPU usage is a consequence of the
"spinning" of the process. "Spinning" means that the process continues to
look for the availability of the latch after certain intervals of time,
during which it sleeps.
6. How to identify contention for internal latches?
Relevant data dictionary views to query
V$LATCH
V$LATCHHOLDER
V$LATCHNAME
Each row in the V$LATCH table contains statistics for a different type
of latch. The columns of the table reflect activity for different types
of latch requests. The distinction between these types of requests is
whether the requesting process continues to request a latch if it
is unavailable:
willing-to-wait If the latch requested with a willing-to-wait
request is not available, the requesting process
waits a short time and requests the latch again.
The process continues waiting and requesting until
the latch is available.
no wait If the latch requested with an immediate request is
not available, the requesting process does not
wait, but continues processing.
V$LATCHNAME key information:
GETS Number of successful willing-to-wait requests for
a latch.
MISSES Number of times an initial willing-to-wait request
was unsuccessful.
SLEEPS Number of times a process waited a requested a latch
after an initial wiling-to-wait request.
IMMEDIATE_GETS Number of successful immediate requests for each latch.
IMMEDIATE_MISSES Number of unsuccessful immediate requests for each latch.
Calculating latch hit ratio
To get the Hit ratio for latches apply the following formula:
"willing-to-wait" Hit Ratio=(GETS-MISSES)/GETS
"no wait" Hit Ratio=(IMMEDIATE_GETS-IMMEDIATE_MISSES)/IMMEDIATE_GETS
This number should be close to 1. If not, tune according to the latch name
7. Useful SQL scripts to get latch information
** Display System-wide latch statistics.
column name format A32 truncate heading "LATCH NAME"
column pid heading "HOLDER PID"
select c.name,a.addr,a.gets,a.misses,a.sleeps,
a.immediate_gets,a.immediate_misses,b.pid
from v$latch a, v$latchholder b, v$latchname c
where a.addr = b.laddr(+)
and a.latch# = c.latch#
order by a.latch#;
** Given a latch address, find out the latch name.
column name format a64 heading 'Name'
select a.name from v$latchname a, v$latch b
where b.addr = '&addr'
and b.latch#=a.latch#;
** Display latch statistics by latch name.
column name format a32 heading 'LATCH NAME'
column pid heading 'HOLDER PID'
select c.name,a.addr,a.gets,a.misses,a.sleeps,
a.immediate_gets,a.immediate_misses,b.pid
from v$latch a, v$latchholder b, v$latchname c
where a.addr = b.laddr(+) and a.latch# = c.latch#
and c.name like '&latch_name%' order by a.latch#;
8. List of all the latches
Oracle versions might differ in the latch# assigned to the existing latches.
The following query will help you to identify all latches and the number assigned.
column name format a40 heading 'LATCH NAME'
select latch#, name from v$latchname;

My apple ID online is different than my apple ID on my iPhone. How can this happen and how do I fix it?

My apple ID online is different than my apple ID on my iPhone. How can this happen and how can I fix it?

You'll have to get the other person to delete your son's email address.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

HT2736 How is it delivered and how do I know if has got there?

Similar Messages

Maybe you are looking for