HT2736 how much time does it need to arrive to the email?

i sent my brother an album as a gift on iTunes.
is it possible to make it arrive now? i put today's date as the arrival date.
so, is there a certain hour that the gift arrives to the email?
thanks,
Tom

Hello,
Any sales-person (or any person for that matter) that provided metrics of such things should not be trusted.
You can not take something and apply a static/fixed measurement to something that has varying values.
Maybe the Network is Slow and running at 128kbs versus 1GB .... How are we to know how fast your network is?
Maybe the database has 10 instances running on it at 95% utilization .... How are we to know that?
Maybe you have a 10k SCSI drive, versus a 15k SCSI drive for data .... How are we to know that?
Too many variables that can function at different speeds to respond.
Thank you,

Similar Messages

How much time does adf.waitForpageLoaded() waits ?

If I am using adf.waitForpageLoaded() and suppose the page loading is very slow or the page doesn't load completely . How much time does it wait For before finally throwing exception ?

Default timeout will be 60 secs.

How much time does it usually takes for moderator approval for a post

How much time does it usually takes for moderator approval for a post?
I have a post posted on Mar 9 and it is still pending for moderator approval.

It's impossible for anyone here to say. It could be very quick, or a given book may never appear. As RG said, it's completely up to the publisher in the applicable country.
Regards.

How much time does the dowload of photoshop CC take ?

How much time does the dowload of photoshop CC take ?

Hi Saurabh,
I am facing the same problem. It is taking very long time in "Create Database Schema".
How the problem got resolved for u?
My Laptop capacity is 500 GB (USB), 2 GB Ram, Dual Core Processor.
Any idea how long it will take in this configuration?
Thanks in advance.
Vijay G

How much time does the ESS import take?

Hi,
How much time does import of ESS into NWDI take?
I have selected following files for import yesterday:
SAP-JEE
SAP-BUILDT
SAP-ESS
SAP-JTECHS
SAPPCUI_GP
and looked at it today and it is still importing.
In CMS Transport Studio State column displays message: Import running.
Any ideas why it takes so long?
Regards,
Ladislav

Hi,
I have imported files one by one in this order:
SAP-JEE
SAP_BUILDT
SAP_JTECHS
SAPPCUI_GP
SAP_ESS
Is this order correct?
I didn't import EP_BUILDT - is it required?
I have checked the CBS logs and there is one broken DC in SAPPCUI_GP compartment
in the pcui_gp/isr development component.
The build log contains this error:
    [javac] Compiling 316 source files to /usr/sap/PDI/JC26/j2ee/cluster/server0/temp/CBS/3/.B/22/t/0C0A08ED5B9ACC3F0164FD6D8A0DB879/classes
     [javac] ERROR: /usr/sap/PDI/JC26/j2ee/cluster/server0/temp/CBS/3/.B/22/t/0C0A08ED5B9ACC3F0164FD6D8A0DB879/gen_wdp/packages/com/sap/pcui_gp/isr/isrprocessevent/FcISRProcessEvent.java:470: cannot resolve symbol
     [javac] ERROR: symbol : method getWebContextAdapter ()
     [javac] ERROR: location: interface com.sap.tc.webdynpro.services.task.ITask
     [javac] ERROR:                               .getCurrentTask()
     [javac] ERROR:                                                                ^
     [javac] WARNING: Note: Some input files use or override a deprecated API.
     [javac] WARNING: Note: Recompile with -deprecation for details.
     [javac] 1 error
Maybe because of this error the requests are queued?
How to fix this?
Regards,
Ladislav

How much time does ipad 4 take to fully charge???

how much time does ipad 4 take to fully charge???

It will obviously vary depending on how drained the battery is, but figure on 3-4 hours for a full charge.

How much time does a single transmission take?

Hello,
I was wondering what is the time taken to transmit one sample takes. For example, if the sample interval is 5 seconds, does the actual transmission take 10ms? What does it do for the rest of the time?
Also, how much energy does a 3202 node take to transmit a single sample?
Thanks,
Sravan

Hey Sravan,
I wanted to provide some additional details to Kyle's post above.
This is on average what we have seen with a 3212 node sampling at a 60 second sample interval:
Sleep Duration: 58.774 seconds
Sleep Power: 7.41 mJ
Acquisition Duration (All 4 channels): 1150 ms
Acquisition Energy: 2.84 mJ
Transmit Duration: 55 ms
Transmit Energy: 9.17 mJ
Receive Duration: 21 ms
Receive Energy: 1.83 mJ
Additionally, if your sample rate is above 61 seconds, then you will run into the Heartbeat Interval which fires after every 61 seconds of inactivity. Below are average power measurements for the heartbeat interval:
Transmit Heartbeat Duration: 55ms
Transmit Heartbeat Energy: 7.79 mJ
Note: Each heartbeat will then also need to account for receiving that a response from the gateway (Receive information from above).
Taking all that into account, the graph below shows estimated battery life for sample intervals up to 300 seconds. The dips in the graph represent a sample interval that is just larger than the heartbeat interval, which essentially means you are transmitting twice in a very short period.
Hopefully you find this information helpful. Please let me know if I can clarify anything for you.
National Instruments
WSN/Wireless DAQ Product Support Engineer

How much time does 8.2 software have?

I've been reviewing software revisions for the Cisco ASA 5500 family. We have a few clients running 8.2 and the jump to 8.3 will require significant effort to make sure everything translates properly. There are no features in 8.3 that these clients require so it seems in their, and our, best interest to let them ride the 8.2 software until an upgrade is necessary to continue receiving security patches. I have looked for EOL notifications but have not found anything for 8.2. I have also placed an inquiry with our SE at Cisco, but I thought I would ask if anyone knows anything about how much time 8.2 has before we could expect to see an EOL notification.

Hi,
Here is some information related to 8.1 Software.
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/end_of_life_c51_640618.html
Table 1. End-of-Life Milestones and Dates for the Cisco ASA 5500 Series Adaptive Security Appliance Software Release 8.1
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
January 15, 2011
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
July 16, 2011
Last Ship Date:
OS SW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
October 14, 2011
End of SW Maintenance Releases Date:
OS SW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
July 15, 2012
End of New Service Attachment Date:
OS SW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
July 15, 2012
End of Service Contract Renewal Date:
OS SW
The last date to extend or renew a service contract for the product.
October 11, 2015
Last Date of Support:
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
July 31, 2016
HW = Hardware OS SW = Operating System Software App. SW = Application Software
I can't seem to find the same for the 8.2.
Though I would consider that there are still alot of users happily going about with the very old PIX firewalls running software 6.x or even older. Not saying its a good thing but it work.
And considering 8.2 is the latest software before the BIG NAT change I would imagine it will stay in use for a long time for those that dont want to learn/adopt the new NAT format.
- Jouni

How much time does an AP take to failover to secondary controller

hi All,
My query is to understand how much time will an AP take to failover to its secondary WLC(Backup) incase primary goes offline.
Whats the heartbeat time for each AP to verify reachability to WLC.
also what is the purpose of AP Fail over priority under each AP. i want to ensure AP's fall back to primary WLC once its back online.(Preemption)

Hi Matehw,
My query is to understand how much time will an AP take to failover to its secondary WLC(Backup) incase primary goes offline.
We can not tell exact time but normally It takes 1-3 minutes.
Whats the heartbeat time for each AP to verify reachability to WLC.
AP Heartbeat Timeout - AP sends heartbeat to WLC (By default its 30s). Once the primary WLC(or where AP is connected to)goes down, With heartbeats, the AP realizes sooner that the controller has become unreachable.
also what is the purpose of AP Fail over priority under each AP.
First of all there are three types: it goes like this Cirtical...high...medium..low.
***To configure AP failover priority, we must enable AP Fallback feature globally and then individual APs with a suitable priority level.
*** When using both the local and global backup configurations, the locally configured settings take precedence in the event of a controller failure. If an AP is not able to join any of the locally configured controllers, it then tries to join the global backup controllers.
More info:
http://rscciew.wordpress.com/2014/01/22/ap-failover/
Regards
Dont forget to rate helpful posts

How much time does it take to build a website in muse?

I would like to know how much time I will have to use in order to make my website from scratch.
I already have the content (Images, Text, Organization)
I would like it to be 10 pages.
I have watched a lot of tutorials and have played with muse for a while.

Hi
This would entirely depend on the site and the design you are creating.
There is no exact time defined as such , as you have already gone through tutorials and worked with Muse , I would suggest you to use the features and try.
Thanks,
Sanjit

How much time does CATPATCH.sql take

Hi,
Iam upgrading my db from 9.2.0.1 to 9.2.0.4 . Its been 2 hrs since the catpatch.sql script is runnig. When i queried dba_registry it is showing status as loading for packege & body.
Can any tell me how much does this script takes.
Thanks in advance.
Bhavesh

The speed of execution is very dependent on the memory and CPU of the machine in which the patch is being applied. I have seen times ranging from 30 minutes to 4 hours. The four hours was experienced with a database in a virtual machine with 512MB of RAM.

How much bandwith does SBO need

I need to know how much bandwith the SBO clients needs ? Is there a document or table in SAP where it tells me these information ? Mostly these is for branch office and need these information (MS Terminal Server is not an option)

Hi
One of our client is using 1mbps dedicated tunnul, but the performance is not out standing. ofcourse there is other traffic flows in that band mainly the user signIN authentication required for domine
I would say citrix would do well in comparision
Regards
Sandeep

How much time does it take an SDK program to save an AR Invoice?

Hi Guys,
I know there are lots of things that I need to consider to know the answer to this question but I'm gonna ask it anyway.
I have an HP Proliant ML370g5, with two intel zeon 1.86ghz quad core processors, 4gb ddr3 400mhz.
Do you have an idea how long does it take an sdk program to save an AR invoice? Everynight, I need to automatically save around 600 invoices with an estimated 500 detail lines per invoice. The data are coming from a temporary table that is filled up by a remote program (not SDK) by day. At night, the SDK will get those data and post it to SBO as AR Invoice.
I hope I made my explanation clear. PLease help.
Thanks,

Hi Joel,
Why don't you just test one invoice? I know when you're in the user interface it gets very slow when posting big documents, but the SDK should be similar speed as the user interface when clicking the Add button.
I haven't posted such big documents with the SDK. Another drawback of such big documents is that when you scroll through them via the user interface it takes very long to retrieve those documents and makes the entire user interface slow.
Hope it helps,
Adele

How much time does it take to launch iMovie on Macbook pro retina ?

On my system ,it takes some 4-5 s,should not it be faster due to ssd?iPhoto opens in one -two seconds,however.

I've been downloading a rented movie from iTunes on my iPad or several hours now and barely a quarter done. What am I doing wrong?
Impossible to say. A transfer takes as long as it takes. And since you are giving us no concrete information to go on, all we can do is make guesses. For instance, you list a PB G4 platform and OS X v 10.6.3. Should I assume you are performing the transfer on an old 400 MHz PB or a newer Intel Duo PBP 2.67 GHZ platform. Are you using an old 1.1 USB connection or USB 2.0? is this a direct download from iTunes via a wireless connection and if so is it running in "a", "b" or "n" mode? Should I assume that Time Machine is making hourly backups and is interferring with normal transfer operations or not? How may other processes and/or applications should be assumed to be in operation. Should we assume the rental is in an SD or HD format?
Basically, you hardware/software combination may or may not be performing normally. But it is impossible to say whithout knowing more about what (in terms of data size) is being moved and how you are moving it.

How much time do I need to process the data

Re. my previous question.
I will be scanning 26 analogue channels at 7 khz into the PCI 6024E using a SCXI 1000 with an 1100 temperature module and the voltage signals going into the 1180 direct feedthrough.
I would like to acquire up to 3 seconds of data at 7 khz on all 26 channels. I then would 'decimate' the 20 thermocouple channels down to a sample rate of about 700 hz from 7 khz and then display the temperature profiles on a chart and then write the data to disk for all 20 channels writing only the reduced number of samples for each channel.
Two of the 7 khz inputs I would do an RMS calculation on and then display the results and also write the results of the RMS to a different file.
The program then needs to
be ready to sample new data again for three seconds.
The computer is a P3 500 MHz with 327 MB ram.
Another part of the question would be suggestions about how to write the program so that we could be sampling new data while the program is processing the old data and writing to disk.

Hello mhtl,
If your question is how long will it take to process the tasks you mentioned, there's really no way to tell. This not only depends on the machine, but how you implement it. Certainly, tasks such as this are possible. In fact, we have a good example program that shows you a good structure using threads and queues.
Running Multiple Tasks in LabVIEW
(Make sure you select the "advanced" VI inside the llb file.) This example puts the three tasks, acquire, analyze, and present into three separate threads so that they are all acting simultaneously. (Which I believe was your question.) In your "analyze" V
I, you could be processing your data while the "show data" VI is simultaneously writing previous data to file. There is a good tutorial linked to the page I mentioned above as well. This topic is also covered in our LabVIEW Advanced training course if you're interested.
I hope this helps!
Russell
Applications Engineer
National Instruments
http://www.ni.com/support

HT2736 how much time does it need to arrive to the email?

Similar Messages

Maybe you are looking for