HT2736 recipients are not receiving gifted music

I've gifted music, but they are not receiving it?

Do the recipients have access to the folios?

Similar Messages

  • Can't accept BBM invitations and Invites sent show as "Pending for Authorization" but recipients are not receiving them either (PIN Message Status : Service Blocked)

    I recenly changed device from BB Curve 8530 to BB Bold 9900 and ever since then can't accept BBM invitations and Invites sent shows only as "Pending for Authorization" but recipients are not receiving them either. Tried sending PIN messages  but  I got a red x next to the message and the status says: "Service Blocked" .
    When my phone got lost, I was lucky that I just synchronized my device to my BB Desktop. Not only was I able to retrieve my contacts (phonebooks and BBM) but also ALL txt msgs and even call logs
    Anway, that happening, I assumed I don't need to re-send all my BBM friends invites since some were able to communicate with me. But for those who have deleted my profile (knowing it got lost) and were still on my contact were the ones affected. I tried deleting them and sent an invite only to find out that: I can't accept BBM invitations and Invites sent shows as "Pending for Authorization" but recipients are not receiving any. (they also have the same pending for authorization notice on their end) 
    When I tried to send them a PIN message I get a red x next to the message nd get the service blocked message.
    Help I do not know what else to do.
    ** FYI: new contacts added with my new PIN have no prob sending invites and me accepting them all.

    Hello Lhea,
    This issue is most likely Caused by the BlackBerry not being provisioned for BlackBerry Data Services. 
    Please have a look at the following article that covers "Service Blocked" when sending a PIN message:
    http://btsc.webapps.blackberry.com/btsc/KB19244
    I hope this helps.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Since upgrading to Lion, my PC recipients are not receiving photos I attach to the email sent from iphoto. Why?

    Since I upgraded to Lion, my photos are not attached to emails. Example: I select photos in iphoto, click Share and send the email.
    Recipients tell me that there is 'nothing attached, no photo attached."  Can you help?

    This doesn't work for me at all. I tried entering exactly the same information that I used to set up my regular email account and I'm still getting an error message. I even tried switching to using my gmail account and neither one worked. Then it got hung up and had to repair my database! I have a lot of photos on my Mac (thank goodness they're backed up) and I was really sweating it for a moment.
    Apple is so easy until it's not. I find this to be really aggrevating and I'm irritated that it hasn't been fixed. In fact I did an online search and someone described this same problem in detail and it was exactly what was happening to me. Same error messages.
    I'm frustrated that Apple keeps updating it's operating system and then we go through these glitches.
    And while I'm at it, I have never had such a frustrating time using my login information as I have to get into this forum! Why do they make it so difficult? There's just something about the way it's worded that get's me messed up every time. Meanwhile, at least get iPhoto fixed!

  • I just started using Adobe Send but customers are not receiving my emails

    I am using Adobe Send to send pdf files to my customers. I choose my files, enter my customers email address & copy me...hit send.
    However, my customers and myself are not getting my emails...anyone else have this happen? How do I fix? I can't track the emails if my recipients are not receiving them?!

    There are still many accounts who are not getting the emails…what I am doing is copying myself at my msn.com as that account seems to get all of them.
    So then once received, I then forward them from my msn email address. Then they get them.
    I think they get put in spam or blocked because because the from email address says (faked from)
    My bigger question — my links are expiring – this link below doesn’t work anymore???
    <https://files.acrobat.com/a/preview/a0aaa21d-d509-4ac5-b6b4-6f0c3eec337a> <https://files.acrobat.com/a/preview/b3a351a3-3b8a-4d94-b9eb-a71fc693f1a3> <https://files.acrobat.com/a/preview/17e2ba1f-d971-4bd8-955d-0ab2729dbdd9> <https://files.acrobat.com/a/preview/5f834289-94e9-42c2-898d-75ed90595064> NEW! ONLINE CATALOGS! <https://files.acrobat.com/a/preview/a0aaa21d-d509-4ac5-b6b4-6f0c3eec337a> <http://tinyurl.com/CatalogsApril2015> <https://files.acrobat.com/a/preview/fbe2dd3b-cc8f-434e-8350-18b2b8977acc> <https://files.acrobat.com/a/preview/b3a351a3-3b8a-4d94-b9eb-a71fc693f1a3> <https://files.acrobat.com/a/preview/17e2ba1f-d971-4bd8-955d-0ab2729dbdd9> <https://files.acrobat.com/a/preview/5f834289-94e9-42c2-898d-75ed90595064> Shop by Brand or Occasion! <https://files.acrobat.com/a/preview/a0aaa21d-d509-4ac5-b6b4-6f0c3eec337a>
    Jane Bayer
    Evergreen Colorado Territory Manager
    303-946-3648 Cell
    1-800-921-1198 Fax
    www.myevergreen.com<applewebdata://D4BD4473-0E8C-4F3E-95A4-742A945BE6B0/www.myevergreen.co m>
    Product Videos!<http://www.myevergreenonline.com/t-productvideos.aspx>
    How to register online!<http://help.myevergreenonline.com/en/knowledgebase/how-to-register-for-an-account/>

  • Windows users are not receiving attachments sent out of Mail

    I am a consultant. I use Mail in Snow Leopard. Software is up to date.
    Our business uses Microsoft Exchange Server 2003. All other consultants in the company are using Windows. In Mail I connect via IMAP. It has worked flawlessly until recently.
    Recently, my corporate clients (various clients not related to one another nor using the same email server) have complained that they are not receiving my email attachments. It is not universal. It is inconsistent, even with the same client. Sometimes the attachments are there and sometimes not.
    I have verified two things. 1) That the attachments are present in the emails in my outbox. 2) That the emails leave our server with the attachment (I accomplished this by contacting our Microsoft Exchange service provider and giving them examples, which they tracked down and verified that the emails left them with the attachments.).
    Our service provider suggested that Mail is adding something to the email that is causing Outlook (the common denominator is that the clients receiving the emails are all on Outlook) to strip the attachment. Or, the antivirus is stripping it. Something about the Mail email is causing Outlook or some antivirus software to strip the attachments.
    Has anyone else encountered this? Is there something that can be done?
    Right now I've had to go to Thunderbird in order for my attachments to be received. I'd rather stay with Mac all the way, but I cannot trust that my clients will receive attachments.
    I'm hoping that when our company changes to MS Exchange Server 2007, that the problem will go away, since Mail can interface with the 2007 version directly. But, until then, I would really like to stick with Mail, if I can find a work around.
    Thanks.
    Matt

    I am now having exactly the same problem.  But here is a new wrinkle.  ALL the persons having the problem you describe - that attachments are stripped off - are using cox.net as their e-mail provider.   I am not saying that all cox.net mail users are having the problem, but those having the problem are among the cox.net e-mail users.  None of my recipients using aol.com, yahoo.com, gmail.com, verizon.net, zona.net, etc. are having any problems.  Only some of the cox.net e-mail users. 
    I suspect but have not checked that they are all PC users (I use a Mac with Mail) and, now that I have become aware of this thread, I will check if they use Outlook.
    It started a few months ago.  I had no problems before and now this, with the same people.  Obviously something must have changed but what?
    Please let me know if you have found anything more about this - or even a solution?  :-)

  • Some clients are not receiving my mail attachments.

    Some clients are not receiving my mail attachments. Other recipients of the same email DO receive these attachments. It doesn't matter whether it is a jpg, pdf, doc, or other. Sending from gmail or entourage works, only sending from apple mail is a problem.  This has been an ongoing problem for me in Lion and Snow Leopard. I'm new to this forum, so not sure I'm posting in the right area, but I've searched for an answer and can't find anything. Do I need a plug-in or something?  I like my apple mail and don't want to switch, but this is a real problem for me.  Help, please!

    We have the same problem in Snow Leopard, so the problem isn't new. I've been researching this for a while now. Based on what I've read in a whole load of discussions it seems it's an issue in the way Outlook reads the e-mails send by Apple Mail. I've no idea of the technicalities of this but one obvious difference is that Mail's default formatting is Rich Text and Outlook's is HTML, but what do I know.
    We've done variuos test with our PC based clients but with no success: Send as Icon; Window's friendly attachement; Mail Attachement Iconiser, etc. Nothing gets rid of the problem entirely. We're a Mac based Public Relations agency and we send image to the media all of the time...and we have no guarantees that they are getting through.
    It's frustrating that Mail doesn't have an option, as it does for plain text, to send in an outlook friendly way. To me it's a huge problem and if Apple isn't going to sort it, given that Outlook is the choice of Enterprise and 95% of our clients, then we're going to have to spend thousands and switch to Outlook. Apple have gone to great pains to promote cross-compatibility with PC's and perhaps this is one little example of where they could try harder.
    Mail has not had much obvious love and attention for a while and if there's an Apple employee looking in on this thread, perhaps it's time to love it up, give it a few more bells and whistles (without over-complicating of course) and make it sing with Outlook.
    My last attenpt is to try Thunderbird as a default mail client; I'm told it doesn't suffer from the same PC compatibility issues.

  • E-mail appears in sent box but recipients are not getting it

    I have been sending e-mails to people but they are not receiving them. Also the e-mail that I sent shows up in my sent box. The account is through my school and they've been really helpful (just a little bit of sarcasm there). They told me to look at incoming and outgoing servers, which have been correctly put in. Any suggestions?

    I'm assuming this is now a very regular event, and not intermittent?
    Do you have a non-.edu email account to which you could CC or BCC yourself, and see if you are receiving it there? And if so, then verify whether your desired recipients received anything if you did?
    Also, at the same time, CC or BCC your school account. Do you receive a copy there?
    When you send these emails, is the computer that you are using connected to the campus LAN, or are you trying to access their mail servers from "outside?"

  • SahrePoint 2013 Server & Project Server 2013 - Notifications and reminders are not received by certain users

    Dears,
    We have recently implemented MS EPM 2013 where we started to face some strange behavior with the standard alerts and reminders sent from the system.
    Minor number of the users (with different levels of privileges from administrators to team members) are receiving emails and alerts normally (either when they are assigned on project schedule tasks or SharePoint list items alerts) without any issues however
    the. on the other hand the other majority number of resources are not receiving any kind of alerts from the system (neither from Project Server Nor from SharePoint).
    knowing that, all the resources/users have their emails configured properly, and their other attributes are almost the same for all users. all the emails are stored on the same exchange server.
    Anyone can help on this please.
    Appreciate your cooperation.
    Ibrahim Al-Masri Technology Manager at MethodCorp

    Thanks Dinesh, 
    Actually the users have this global permissions configured for them and yet they weren't receiving emails.
    We Just could solve this puzzle, all what we needed to do is to configure the
    RBS for the majority for the users who weren't receiving emails. 
    Welcome to EPM 2013 UN-unannounced changes.
    Ibrahim Al-Masri Technology Manager at MethodCorp

  • I have a playlist of tracks that are not in my music library

    It is my understanding that all of your music resides within your Music Library and from there you can create playlists, whether Smart Playlists or just Playlists, but your playlists do not contain anything that isn't in your main Music Library.
    I have a standard playlist that contains over 400 tracks where many are not in my Music Library from various different artists, albums and genres.
    Is there a way to get the music within the playlist back into my Music Library without going in artist by artist Adding tracks?

    All Tag edits were and are done within iTunes.
    This specific Playlist was created over a year ago with an earlier version of iTunes.  I just went through the process of changing information on a few of those tracks within the Playlist I have problems with and the current version of iTunes is not copying the music files, but moving them.
    I think that this must have been a bug in whatever version of iTunes I was using last year when I first started working on my Tags.
    I don't know if it has anything to do with it, but just last month I had iTunes Convert the ID3 Tags on everything within my Music Library
    turingtest2 - I have not tried your suggestion yet, but I will let you know what happens.  Right now, I'm just trying to get rid of the duplicated tracks without Tag updates I've made.

  • Vlans dhcp status are not received

    Hello,
    I am configuring vlan on sg300-20 in dhcp mode.
    One  vlan that is directed connected to the adsl router get ip address and when I connect host to the ports in this vlan they also receive ip address and can go on internet.
    The other four vlans dhcp status are not received.
    Kindly help me check this. Thanks
    Below is the config log:
    switch4ba497#sh running-config
    config-file-header
    switch4ba497
    v1.2.9.44 / R750_NIK_1_2_584_002
    CLI v1.0
    file SSD indicator encrypted
    ssd-control-start
    ssd config
    ssd file passphrase control unrestricted
    no ssd file integrity control
    ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
    vlan database
    vlan 5,10,20,30,40
    exit
    voice vlan oui-table add 0001e3 Siemens_AG_phone________
    voice vlan oui-table add 00036b Cisco_phone_____________
    voice vlan oui-table add 00096e Avaya___________________
    voice vlan oui-table add 000fe2 H3C_Aolynk______________
    voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
    voice vlan oui-table add 00d01e Pingtel_phone___________
    voice vlan oui-table add 00e075 Polycom/Veritel_phone___
    voice vlan oui-table add 00e0bb 3Com_phone______________
    ip dhcp relay address 192.168.3.1
    ip dhcp information option
    no boot host auto-config
    bonjour interface range vlan 1
    hostname switch4ba497
    line telnet
    exec-timeout 0
    exit
    no passwords complexity enable
    username cisco password encrypted 7af78c911d5b48bea1dc2449d9d89513abeb4be5 privilege
    15
    ip http timeout-policy 0 http-only
    ip name-server  192.168.1.1 192.168.3.1
    ip telnet server
    interface vlan 1
    ip address 192.168.2.254 255.255.255.0
    no ip address dhcp
    interface vlan 5
    name WAN
    ip address dhcp
    interface vlan 10
    name Studio
    ip address dhcp
    interface vlan 20
    name Service
    ip address dhcp
    interface vlan 30
    name Admin
    ip address dhcp
    interface vlan 40
    name Data
    ip address dhcp
    interface gigabitethernet1
    switchport mode access
    interface gigabitethernet2
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet3
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet4
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet5
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet6
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet7
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet8
    switchport mode access
    interface gigabitethernet9
    switchport mode access
    switchport access vlan 20
    interface gigabitethernet10
    switchport mode access
    switchport access vlan 20
    interface gigabitethernet11
    switchport mode access
    switchport access vlan 20
    interface gigabitethernet12
    switchport mode access
    switchport access vlan 20
    interface gigabitethernet13
    switchport mode access
    switchport access vlan 30
    interface gigabitethernet14
    switchport mode access
    switchport access vlan 30
    interface gigabitethernet15
    switchport mode access
    switchport access vlan 30
    interface gigabitethernet16
    switchport mode access
    switchport access vlan 30
    interface gigabitethernet17
    switchport mode access
    interface gigabitethernet18
    switchport trunk native vlan 40
    interface gigabitethernet19
    switchport mode access
    switchport access vlan 5
    interface gigabitethernet20
    switchport trunk native vlan 5
    switch4ba497#sh ip int
        IP Address         I/F       Type     Directed   Precedence   Status
                                              Broadcast
    0.0.0.0/32          vlan 10   DHCP        disable    No         Not
                                                                    received
    0.0.0.0/32          vlan 20   DHCP        disable    No         Not
                                                                    received
    0.0.0.0/32          vlan 30   DHCP        disable    No         Not
                                                                    received
    0.0.0.0/32          vlan 40   DHCP        disable    No         Not
                                                                    received
    192.168.2.254/24    vlan 1    Static      disable    No         Valid
    192.168.3.102/24    vlan 5    DHCP        disable    No         Valid
    switch4ba497#
    Also i do not understand why the ip address is 0.0.0.0/32 because the dhcp server ip address is 192.168.3.1

    Dear Customer,
    Thank you for reaching Small Business Support Community.
    In Layer 2 system mode, only the management VLAN can be configured with a static or dynamic IP address. In Layer 3 system mode, all the interface types (ports,LAGs, and/or VLANs) on the device can be configured with a static or dynamic IP. Configuring the device to work in either mode is performed in the Administration >System Settings page
    When a DCHP Client starts a discovery process, it assigns a dummy IP address 0.0.0.0 before the real address is obtained. This dummy address has the status of “Not Received”.
    Pretty much your problem should be solved by changing to Layer3 system mode.  Please let me know if anything comes up and/or if there is any further assistance I may help you with.
    Kind regards,
    Jeffrey Rodriguez S. .:|:.:|:.
    Cisco Customer Support Engineer
    *Please rate the Post so other will know when an answer has been found.

  • Dhcp status are not received on sg300-20

    Hello,
    I am configuring vlan on sg300-20 in dhcp mode.
    One  vlan (5) that is directed connected to the adsl router get ip address and when I connect host to the ports in this vlan they also receive ip address and can go on internet.
    The other four vlans  dhcp status are not received
    Kindly help me check this. Thanks
    switch4ba497#sh running-config
    config-file-header
    switch4ba497
    v1.2.9.44 / R750_NIK_1_2_584_002
    CLI v1.0
    file SSD indicator encrypted
    ssd-control-start
    ssd config
    ssd file passphrase control unrestricted
    no ssd file integrity control
    ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
    vlan database
    vlan 5,10,20,30,40
    exit
    voice vlan oui-table add 0001e3 Siemens_AG_phone________
    voice vlan oui-table add 00036b Cisco_phone_____________
    voice vlan oui-table add 00096e Avaya___________________
    voice vlan oui-table add 000fe2 H3C_Aolynk______________
    voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
    voice vlan oui-table add 00d01e Pingtel_phone___________
    voice vlan oui-table add 00e075 Polycom/Veritel_phone___
    voice vlan oui-table add 00e0bb 3Com_phone______________
    ip dhcp relay address 192.168.3.1
    ip dhcp information option
    no boot host auto-config
    bonjour interface range vlan 1
    hostname switch4ba497
    line telnet
    exec-timeout 0
    exit
    no passwords complexity enable
    username cisco password encrypted 7af78c911d5b48bea1dc2449d9d89513abeb4be5 privilege
    15
    ip http timeout-policy 0 http-only
    ip name-server  192.168.1.1 192.168.3.1
    ip telnet server
    interface vlan 1
    ip address 192.168.2.254 255.255.255.0
    no ip address dhcp
    interface vlan 5
    name WAN
    ip address dhcp
    interface vlan 10
    name Studio
    ip address dhcp
    interface vlan 20
    name Service
    ip address dhcp
    interface vlan 30
    name Admin
    ip address dhcp
    interface vlan 40
    name Data
    ip address dhcp
    interface gigabitethernet1
    switchport mode access
    interface gigabitethernet2
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet3
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet4
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet5
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet6
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet7
    switchport mode access
    switchport access vlan 10
    interface gigabitethernet8
    switchport mode access
    interface gigabitethernet9
    switchport mode access
    switchport access vlan 20
    interface gigabitethernet10
    switchport mode access
    switchport access vlan 20
    interface gigabitethernet11
    switchport mode access
    switchport access vlan 20
    interface gigabitethernet12
    switchport mode access
    switchport access vlan 20
    interface gigabitethernet13
    switchport mode access
    switchport access vlan 30
    interface gigabitethernet14
    switchport mode access
    switchport access vlan 30
    interface gigabitethernet15
    switchport mode access
    switchport access vlan 30
    interface gigabitethernet16
    switchport mode access
    switchport access vlan 30
    interface gigabitethernet17
    switchport mode access
    interface gigabitethernet18
    switchport trunk native vlan 40
    interface gigabitethernet19
    switchport mode access
    switchport access vlan 5
    interface gigabitethernet20
    switchport trunk native vlan 5
    switch4ba497#sh ip int
        IP Address         I/F       Type     Directed   Precedence   Status
                                              Broadcast
    0.0.0.0/32          vlan 10   DHCP        disable    No         Not
                                                                    received
    0.0.0.0/32          vlan 20   DHCP        disable    No         Not
                                                                    received
    0.0.0.0/32          vlan 30   DHCP        disable    No         Not
                                                                    received
    0.0.0.0/32          vlan 40   DHCP        disable    No         Not
                                                                    received
    192.168.2.254/24    vlan 1    Static      disable    No         Valid
    192.168.3.102/24    vlan 5    DHCP        disable    No         Valid
    switch4ba497#
    I also do not understand why the ip address is 0.0.0.0/32.
    Becuase the dhcp address 192.168.3.1/24
    Thanks.

    Hello Tom,
    Yes i can feel you taking me toward the solution.
    Actually I have an ADSL router that has DHCP capability and my vlan interfaces are to receive ip address from it.
    The adsl router Ip address is 192.168.3.1
    Vlan 5 WAN which is directly connected to the adsl router get Ip address while the other vlan do not.
    When I assign port from other vlan to vlan 5 and I attach host to the port they get ip address and go on internet. The strange thing is that the other vlan do not get ip address. Thanks.

  • Documents I forward are not received under the original document name. How do I solve this?

    Documents I forward are not received under the original document name. How do I solve this?

    If you're referring to the name of the attatchment showing when viewing the entire email, that's there's no way to change how it's done.  The title and body of the actual document is unchanged after it's opened. 
    Does this naming of the attachment really confuse the recipient?  If so, put something in the body of the email to make it clear what's attached.

  • My songs are not saved in music throuh i tools

    my songs are not saved in music throuh i tools

    Ok, after copious amounts of button pressing and check boxes I think I've got it.
    Go into the preferences menu under edit.
    Click the playback tab/icon
    There is a drop down menu that says "Play audio using", set this to Windows Audio Session.
    Hit ok.
    Restart iTunes.
    For me, this worked. I hope it works for you too!

  • My downloads are not appearing in music

    After adding music (either by CD or by itunes purchase) my songs are not appearing in Music.

    I'm having the same issue.  Just downloaded two songs and they show up everywhere but the iTunes music library.  No matter what I try, I can't make them show up there.  Never had the problem before today.

  • Idocs are not received in Destination side.

    Hi Friends,
    I have a small doubt regarding SM58.
    I have 2 dev systems.
    client 100 & 200 we are send the Material data from 100 to 200.
    In 100 system all are fine and the status is 12 and green but those are not received in 200.
    When we check in 200 all the IDOCs are strucked in SM58(TRFC queue).
    Please suggest me?
    Regards,
    Venkat.

    Hi,
    Please check the system RFC connection in WE21 and resend.
    Regards,
    Nandha

Maybe you are looking for