HT2801 DVD Player does not support this media
I was trying to use Bamboo and it will not read disc. I tried to use Nikkon disc and it will not read disc.
The DVD player you bought in the states as well as the discs are in NTSC format and in you part of the world the standard is PAL.
This link may help you to understand, and if you do a web search you can find converters.
http://www.wikihow.com/Convert-NTSC-to-Pal
Hope this helps
Similar Messages
-
Hp the system recovery media does not support this computer, WIN7 GS72 Notebook
HProduct: GS-B66US (17" I3 notebook)
OS: Win7
Bios Rev: F.47
Error message: "hp the system recovery media does not support this computer. You are not able to restore this system"
Changes made to system: Updated bios (I think).
Getting error messages (at system boot, as windows start, and from the intel hard drive controller) warning me to backup data and hard drive my fail.
I replaced the harddrive and inserted the first of my 4 recovery DVDs (created before I updated the bios). After booting from the first recovery disk I get the following message
"hp the system recovery media does not support this computer. You are not able to restore this system with the media"
The computer still boots with the old hard drive (with drive failure imminent messages) I do see support assistant offering another bios update but I did not install it with the hard drive problem
PLEASE HELP
TIAHi,
I think there could be two possible reason. wrong media or systemboard is changed.
did you create any recovery media yourself or you ordered the recovery media from hp? also, was there any systemboard replacement done before?
media created on some other computer (same model) may not work on your computer.
you can order the media from hp.com here.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00810334
also once systemboard is replaced you need to get the configuration settings done for BIOS(only HP can do it).
hope it helps
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem*** -
I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?
I cannot recall the DVD player ever being a place to "store" videos - it is simply an app to play videos.
If your machine is new, then iMovie should be included as the "shrunk" version of iLife is included with Lion (iMovie, Garageband, and iPhoto). However, iMovie is not a place to store videos either - it is a video editor. You import your clips and edit them in order to then burn to a DVD or share via a social media site.
Have you considered simply dragging the clips to your folder "Movies"? That would be a great place to just store them (please be aware that videos are usually large files, so keep your hard drive space in mind so you keep a minimum free and available for the OS to operate properly): -
Hi
anyone there
I want to down load adobe flash player to my I pad but a massage show up saying Safari does not support this ?
Anyone there?No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
Apps that can display some Flash from the Web:
Puffin
SkyFire
Photon Flash
Browse2Go
iSwifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that." -
I keep getting notices to install Adobe Flash Player Version 10, however when I click on the various boxes, it then says that Flash Player does not support Vista. What does all this mean and what is a Flash Player?
I keep getting notices to install Adobe Flash Player Version 10, however when I click on the various boxes, it then says that Flash Player does not support Vista. What does all this mean and what is a Flash Player?
-
Hello,I need help.ipad 3 does not support flash media player.which player must I download instead of flash media player?
Flash is not supported on the iPad - and as Adobe have announced that they are stopping development on all mobile versions of it, it probably never will be.
Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store. -
Dvd player does not work after Leopard upgrade
I installed Leopard, had to upgrade because my printer died and no printers now work with Tiger. Since the upgrade, my DVD player does not work. I have problems burning some cd's too. Is this a known issue? What is the fix?
I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it. -
"...does not support this type of alias."
I just reinstalled the OS 10.4 onto my G5 using the erase and install function. The drive is formatted as a Mac OS Extended (Journaled), which is an HFS+ format. I'm trying to copy some files onto the main hard drive from a DVD. I keep getting an error message that says "[the file name] cannot be copied to the destination, perhaps because the destination does not support this type of alias." I researched the message and the only thing I could find was that the error appears if the destination disk is formatted as a UFS disk. I thought maybe I made a mistake when I reinstalled the OS, so I tried to copy the same files to the secondary internal drive and to an external Firewire drive, and I got the same message both times.
What should I be looking for so that this will work? I'm going to post in a couple other topics, but any help would be greatly appreciated.
Thank you in advance,
LloydBarry,
I was trying to make back-up copies of my Adobe CS2 disks by copying the disks to the hard drive then burning them to CDs, but I got the error message when I dragged the contents from the original CD to the HD.
This worked, but it took a while: I Stuffed each CD to the HD, then unStuffed them and used Toast to burn a new CD. A few steps longer, but at least it worked.
Now, if I could only figure out why the second internal drive does not have the "Ignore Permissions" check box available, I'd be all set.
Thanks,
Lloyd -
Strange IE ExternalInterface Bug: "Object does not support this property or method"
We have an application on a relatively slow server (I mention
the speed because it may be relevant).
The app is flash 8 and uses ExternalInterface to call a
javascript function in its parent page. It also used the
ExternalInterface to receive a call from another function. These
calls happens separately (the outbound one calls up a list view of
items, clicking on an item calls up the details in the flash
movie). In between the calls, the flash movie is hidden by moving
it off screen using absolute positioning.
On my local development box (Windows XPSP2) this works fine
in both directions.
On our production server (LAMP) this works fine in both
directions in Firefox 1.5 and 2.0
BUT while the outbound call from Flash to the page works fine
in Internet Explorer 6 or 7, the call back from the page to the
flash movie fails with the error messgage "Object does not support
this method or property"
We've tried not hiding the flash so it is always present on
the page and still the browser > flash communication breaks in
ie.
We've tried using both the Adobe active content script and
swfobject to embed the flash in the page with no difference in the
resultset. In truth we've given up and gone to a two-page solution,
reloading the flash from the start each time but I wondered if
anyone had encountered a similar issue? Can't see why it would work
perfectly in FF but not in IE.Not sure if this is your problem, but you do reference the
Flash object
differently, depending on the browser. In a video player we
made, that uses
JS to communicate back to Flash, I use a function like this
to modify the
variable depending on the browser:
function changeVideo(xname){
//ff
if(window.vplayer){
window.document["vplayer"].SetVariable("theXML", xname);
window.document["vplayer"].GotoFrame(2);
window.document["vplayer"].Play();
//ie
if(document.vplayer){
document.vplayer.SetVariable("theXML", xname);
document.vplayer.GotoFrame(2);
document.vplayer.Play();
The Flash is in a <div> named 'vplayer'
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/ -
My dvd player does not have audio
my dvd player does not have audio
Hi,
No sound at all or just DVD ? Please try this first to enable Speakers in Playback devices as follows:
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
The player does not support FramePositioningControl
Hi,
i receive a video and i want to count the number of the frames displayed. I use FramePositioningControl and everytime ( i' v tried avi, mov, mpg) i get the same message
The player does not support FramePositioningControl
As u realize i' ve used the Seek.java code for this purpose. If anybody can help please do so.
Thankssshave a look at this link .. maybe this can help:
http://www.onjava.com/pub/a/onjava/2005/06/01/kgpjava.html?page=last -
Revision: 3045
Author: [email protected]
Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
Log Message:
Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-13900
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.javaRevision: 3045
Author: [email protected]
Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
Log Message:
Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-13900
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java -
want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please
If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards. -
Hello,
I start from the end and details show below - this error message i got in sql session:
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
First question - is Oracle Heterogeneous Services are licensed for standard edition ? I cant find this information, and my database - is SE 11.2.0.3.0 - 64bit.
If its ok and HS are licensed for SE, then please see details of my problem:
----OS and packages version
[oracle@aris_sv_db log]$ uname -a
Linux aris_sv_db 2.6.18-308.24.1.el5 #1 SMP Tue Dec 4 17:43:34 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ rpm -qa | grep odbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixodbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixODBC
unixODBC-libs-2.2.11-10.el5
unixODBC-libs-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
unixODBC-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
[oracle@aris_sv_db log]$ rpm -qa | grep freetds
freetds-0.91-1.el5.rf
[oracle@aris_sv_db log]$
-----ODBC.INI, ODBCINST.INI and FREETDS.CONF
[oracle@aris_sv_db log]$ more /home/oracle/.odbc.ini
[ENERGOPLAN]
Driver = FreeTDS
Servername = ENERGOPLAN
Database = ess2
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/odbcinst.ini
# Example driver definitions
[FreeTDS]
Description = MSSQL Driver
Driver = /usr/lib64/libtdsodbc.so.0
#Setup = /usr/lib64/libtdsodbc.so.0
#Driver = /usr/lib64/libodbc.so
#Driver = /usr/lib/libodbc.so
UsageCount = 1
Trace = Yes
TraceFile = /tmp/freetds.log
[ODBC]
DEBUG = 1
TraceFile = /tmp/sqltrace.log
Trace = Yes
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/freetds.conf
# A typical Microsoft server
[ENERGOPLAN]
host = 192.168.10.64
port = 1433
tds version = 8.0
# client charset = UTF-8
client charset = cp1251
[oracle@aris_sv_db log]$
----CHECK CONNECT from ODBC
[oracle@aris_sv_db log]$ isql -v ENERGOPLAN user pass
| Connected! |
| |
| sql-statement |
| help [tablename] |
| quit |
| |
SQL> select count(*) from EnergyType;
| |
| 8 |
SQLRowCount returns 1
1 rows fetched
SQL> [oracle@aris_sv_db log]$ tsql -S ENERGOPLAN -U user -P pass
locale is "en_US.UTF-8"
locale charset is "UTF-8"
using default charset "cp1251"
1> select count(*) from EnergyType;
2> go
8
(1 row affected)
1> [oracle@aris_sv_db log]$
----LISTENER.ORA, TNSNAMES and initENERGOPLAN.ora
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_ENERGOPLAN =
(SID_LIST =
(SID_DESC=
(SID_NAME=ENERGOPLAN)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM=dg4odbc)
(ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/dbhome_1/lib")
ENERGOPLAN =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.72)(PORT = 1523))
ADR_BASE_LISTENER = /u01/app/oracle
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
ENERGOPLAN =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523))
(CONNECT_DATA=(SID=ENERGOPLAN))
(HS=OK)
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/hs/admin/initENERGOPLAN.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = ENERGOPLAN
#HS_FDS_CONNECT_INFO = 192.168.0.199:1433//test
HS_FDS_TRACE_LEVEL = DEBUG
#HS_FDS_TRACE_FILE_NAME = /tmp/hs1.log
HS_FDS_TRACE_FILE_NAME = /u01/app/oracle/product/11.2.0/dbhome_1/hs/log/mytrace.log
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so #/usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib/libodbc.so
#HS_LANGUAGE=american_america.we8iso8859p1
#HS_LANGUAGE=AMERICAN_AMERICA.AL32UTF8
#HS_LANGUAGE=AMERICAN_AMERICA.CL8MSWIN1251
#HS_LANGUAGE=RUSSIAN_RUSSIA.UTF8
#HS_LANGUAGE=Russian_CIS.AL32UTF-8
#HS_FDS_FETCH_ROWS=1
HS_NLS_NCHAR = UCS2
HS_FDS_SQLLEN_INTERPRETATION=32
# ODBC specific environment variables
set ODBCINI=/home/oracle/.odbc.ini
set ODBCINSTINI=/etc/odbcinst.ini
#HS_KEEP_REMOTE_COLUMN_SIZE=ALL
#HS_NLS_LENGTH_SEMANTICS=CHAR
#HS_FDS_SUPPORT_STATISTICS=FALSE
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tnsping ENERGOPLAN
TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 01-APR-2013 16:27:49
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523)) (CONNECT_DATA=(SID=ENERGOPLAN)) (HS=OK))
OK (0 msec)
[oracle@aris_sv_db log]$
----CREATE DBLINK and test from sqlplus
CREATE DATABASE LINK "ENERGOPLAN" CONNECT TO "user" IDENTIFIED BY "pass" USING 'ENERGOPLAN';
[oracle@aris_sv_db log]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Apr 1 16:30:14 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
----logs from hs and odbc
[oracle@aris_sv_db log]$ tail -50 ENERGOPLAN_agt_12117.trc
12 VARCHAR N 100 100 0/ 0 1000 0 200 ConsumptionYearCostUOM
3 DECIMAL N 24 24 9/ 3 0 0 0 ConsumptionYearFactorAmount
-7 BIT N 1 1 0/ 0 0 0 20 NeedToBeApprovedByREK
Exiting hgodtab, rc=0 at 2013/04/01-16:30:42
Entered hgodafr, cursor id 0 at 2013/04/01-16:30:42
Free hoada @ 0x14e5fd20
Exiting hgodafr, rc=0 at 2013/04/01-16:30:42
Entered hgopars, cursor id 1 at 2013/04/01-16:30:42
type:0
SQL text from hgopars, id=1, len=36 ...
00: 53454C45 43542043 4F554E54 282A2920 [SELECT COUNT(*) ]
10: 46524F4D 2022454E 45524759 54595045 [FROM "ENERGYTYPE]
20: 22204131 [" A1]
Exiting hgopars, rc=0 at 2013/04/01-16:30:42
Entered hgoopen, cursor id 1 at 2013/04/01-16:30:42
hgoopen, line 87: NO hoada to print
Deferred open until first fetch.
Exiting hgoopen, rc=0 at 2013/04/01-16:30:42
Entered hgodscr, cursor id 1 at 2013/04/01-16:30:42
Allocate hoada @ 0x14e5fd80
Entered hgodscr_process_sellist_description at 2013/04/01-16:30:42
Entered hgopcda at 2013/04/01-16:30:42
Column:1(): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2013/04/01-16:30:42
Entered hgopoer at 2013/04/01-16:30:42
hgopoer, line 231: got native error 0 and sqlstate IM001; message follows...
[unixODBC][Driver Manager]Driver does not support this function {IM001}
Exiting hgopoer, rc=0 at 2013/04/01-16:30:42
hgodscr, line 407: calling SQLSetStmtAttr got sqlstate IM001
Free hoada @ 0x14e5fd80
hgodscr, line 464: NO hoada to print
Exiting hgodscr, rc=28500 at 2013/04/01-16:30:42 with error ptr FILE:hgodscr.c LINE:407 FUNCTION:hgodscr() ID:Set array fetch size
Entered hgoclse, cursor id 1 at 2013/04/01-16:31:24
Exiting hgoclse, rc=0 at 2013/04/01-16:31:24
Entered hgocomm at 2013/04/01-16:31:24
keepinfo:0, tflag:1
00: 4F52434C 2E343535 32623466 342E362E [ORCL.4552b4f4.6.]
10: 32322E37 363237 [22.7627]
tbid (len 20) is ...
00: 4F52434C 5B362E32 322E3736 32375D5B [ORCL[6.22.7627][]
10: 312E345D [1.4]]
cmt(0):
Entered hgocpctx at 2013/04/01-16:31:24
Exiting hgocpctx, rc=0 at 2013/04/01-16:31:24
Exiting hgocomm, rc=0 at 2013/04/01-16:31:24
Entered hgolgof at 2013/04/01-16:31:24
tflag:1
Exiting hgolgof, rc=0 at 2013/04/01-16:31:24
Entered hgoexit at 2013/04/01-16:31:24
Exiting hgoexit, rc=0
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tail -50 /tmp/sqltrace.log
Native = 0x7fff6ca974f4
Message Text = 0x14e5f968
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_SUCCESS]
SQLState = IM001
Native = 0x7fff6ca974f4 -> 0
Message Text = [[unixODBC][Driver Manager]Driver does not support this function]
[ODBC][12117][SQLGetDiagRecW.c][540]
Entry:
Statement = 0x14e399f0
Rec Number = 2
SQLState = 0x7fff6ca97700
Native = 0x7fff6ca974f4
Message Text = 0x14e5f908
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_NO_DATA]
[ODBC][12117][SQLEndTran.c][315]
Entry:
Connection = 0x14dbd4b0
Completion Type = 0
[ODBC][12117][SQLGetInfo.c][214]
Entry:
Connection = 0x14dbd4b0
Info Type = SQL_CURSOR_COMMIT_BEHAVIOR (23)
Info Value = 0x7fff6ca9781e
Buffer Length = 8
StrLen = 0x7fff6ca9781c
[ODBC][12117][SQLGetInfo.c][528]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLEndTran.c][488]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLDisconnect.c][204]
Entry:
Connection = 0x14dbd4b0
[ODBC][12117][SQLDisconnect.c][341]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][268]
Entry:
Handle Type = 2
Input Handle = 0x14dbd4b0
[ODBC][12117][SQLFreeHandle.c][317]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][203]
Entry:
Handle Type = 1
Input Handle = 0x14dbb0c0
[oracle@aris_sv_db log]$To see which ODBC function DG4ODBC is looking for and unixODBC isn't supporting it would be best to get an ODBC trace file. But as your unixODBC driver (unixODBC-2.2.11-10.el5) is outdated and these old drivers had a lot of issues when being used on 64bit operating systems (for example wrong sizeofint etc). So best would be to update the unixODBC Driver manager to release 2.3.x. More details can be found on the web site: www.unicodbc.org
- Klaus -
R9 290 Gaming - MSIGamingApp: The platform does not support this application
Hey guys,
I have a MSI R9 290X Gaming 8G and can´t use the gaming app.
Whenever I try to run the app, I get an error: The platform does not support this application
So I guess I have the same problem as the dude in that thread:
https://forum-en.msi.com/index.php?topic=179659.0
He had the same issue with the R9 290X Gaming 4G. The problem was, someone flashed a sapphire vbios on his new card.
So can someone check the attached vbios rom, whether it is the right one for my card and not also a sapphire rom or something else?
Thanks and regards.I seem to have the same problem using the Live Update App itself. My card is MSI R9 270X Gaming and I use Windows 8.1 64bit.
S/N: 602-V303-03SB1311026767
Maybe you are looking for
-
How to limit the number of items that a list control can hold?
Hi, I am using a Flex3 List control for one of my projects. I add drag & drop functionality to it, so that i can drag & drop elements from one control to another. How to limit the number of items that a list control can hold / can be dropped in a lis
-
Need table or FM for PO number in SO lineitems
Hi guys, I need table name or FM for salesorder lineitem PO number(in order data tab).I checked in VBKD table, but our requirement is- some sales order contains different PO number in header level and in line item PO number.Users will
-
Dual pairing in OS X and Windows
If I understand the bluetooth pairing process correctly, the MAC addresses of a bluetooth receiving device (the bluetooth adapter itself) and a bluetooth emitting device (in this case, the Magic Trackpad) are paired shared a randomly selected 16-bit
-
How can i copy text from a website without getting blue formatting?
I can't seem to get rid of the blue background when I copy text from a website and paste it into a Word doc. Any suggestions?
-
What happens to Aperture hierarchy?
Other people look at my Aperture Library on iPad, AppleTV and other devices but it's impossible to find a photograph because the hierarchy is lost. Everything seems to be at the root level. Why does it have to be this way and how do you deal with it?