HT2801 I inserted a mini cd into my macbook pro cd slot and now i can't get it out. any suggestions?
I inserted a mini cd into my macbook pro cd slot and now i can't get it out. any suggestions?
If you can wrap some adhesive tape around a stiff business card and insert it inside and see if you can capture it. If possible, hold the MBP in a position where gravity is your ally.
You can open the MBP up, remove the optical drive and open it up or make an appointment at an Apple store genius bar and have them extract it.
Ciao.
Similar Messages
-
Hey. When I put a blank cd into my computer nothing shows up. I am not able to put music on it. What should I do?
I have a disc that has this logo:
compact disc recordable cd-rI just tried what u said and it wasn't on ignore. Any other ideas?
-
I inserted a burnt disc into my macbook pro and iTunes froze, had to shut down my mac in order to eject the disc. Is it not possible to transfer music from homemade cds onto my mac?
Yes, it is possible.
You had an issue in this individual instance. -
I inserted an SD card into my macbook pro and it didnt prompt me that a device was inserted so I took it out. Now the camera isnt showing anything on it. How do I fix this?
AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole. -
Can I insert a memory card into my Macbook Pro? I tried, and it does not go in on its own, I don't want to force it and get it stuck!! Help!
Maybe the wrong port or the wrong kind of memory card? You didn't say what version/year of Macbook Pro you have. Below is a photo of the newest one.
Red oval = USB port. It is to the left of the headphone jack.
Blue oval = SDXC card port. Is your card an SDXC card?
What are your options for transferring data to the picture frame? The manual should say. -
I got locked out of Mac os 9 and now I can't get into OS 9 or OS X. All I see is the Macintosh SE and a finder face and text that says "mac os 9.2 welcome to mac os". I can't get into COntrol Panel to reset the password to allow me to get in.
Do you have OS X and OS 9 installed on your Mac? If so, startup with the Option key depressed. This will open the Startup Manager window. Select the OS you want to start from & click the right arrow.
Cheers, Tom -
I had to change my password for one of my Email accounts ([email protected]) and now I can not get the mail to go into Mozilla Firefox and I don't know how to change the password in Mozilla to get the mail into it.
I looked at how to change my password but the options you told me to use were not available. I clicked on tools then options but there was no sync tab or manage accounts either.The login.salesforce.com website is using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered -
i updated my iphone to iOS 5.1.1 after i updated it, it went into a 30 seconds boot loop, so i tried a hard restore and now windows wont recognize my iphone 4, ANY SUGGESTIONS?
Place the device in DFU mode (google it) and restore.
-
Just loaded the ios6 and now i can't get into itunes store with my 4s. What happened?
Just loaded the ios6 and now I can't get into itunes store with my phone. What happened?
Just loaded the ios6 and now I can't get into itunes store with my phone. What happened?
-
I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?
Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.
-
I have an iphone 5. It has a "no sim" in upper left corner. I removed it, placed it back, restored the phone and now I can't get past the "activation" part. It's telling me to insert a SIM w/out a PIN lock. HELP!!!!!
Hi Michellebone,
I'm sorry to hear you are having this issue with your iPad. Given your description of the issue and the symptoms you are seeing, it sounds like you may need to have your iPad evaluated or serviced. You may find the following page helpful:
Apple - Support - Service Answer Center
Sincerely,
- Brenden -
How do I eject (or get out somehow) a mini cd (3" size) which I slid into my MacBook Pro's CD slot? (Rather stupidly, I admit, not thinking about its small size keeping it from being a good fit.) And of course, it didn't seat on the cd's spindle, and thus is not being "seen" by the computer as being present when I press the eject button, so nothing happens. Because the CD slot has a membrane covering the slot, I can't see in to locate where it is or to try and slip it out manually, either.
Details about my computer, although I don't know that these are needed, are as follows:
Model Name: MacBook Pro
Model Identifier: MacBookPro8,1
Processor Name: Intel Core i5
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B27Thanks for your suggestion, although it didn't work for me. The one that did suggested inserting a sticky note - sticky side down to catch the disk - and slowly pulling it out. I was dubious, but it worked just like magic!
-
I moved the project files and now I can't get them back into iMovie 11
I was working on a project but I ran out of disk space before I could finish it. Now, for this very purpose, I have an external hard drive with plenty of space on it. So I tried moving the folder with all my project files onto the external hd, and now iMovie can't find my project anymore. With iMovie '06 it was as simple as hitting "save as" and saving the project to the external hd, but I guess that's not complicated enough for the new version. Now I can't get into my project. I even try clicking on the actual project file, and it goes to iMovie as if the project was about to open, but nothing happens. So I fear I wasted a lot of time working on that project only to have to start all over because I ran out of disk space.
Someone please tell me there's a way to get the project files open again. Thanksenoughsaid3 wrote:
... my external disk isn't formatted as Mac OS extended (journaled). I don't know how to do this,...
that is a simple one and should be a routine after purchasing a new drive (in a Mac-only environment!):
• on your Mac, Apps/Utilities you'll find Disk 'Utility'
• on the left lane, you'll notice your connected hard drive(s)
• select it, click on the 'erase' tab
• NOTE: FORMATTING A DRIVE MEANS ERASING ALL CONTENT ON THAT DRIVE!
that's why you should do it as step#1 after purchasing a new drive
done ...- -
I removed cookies and now I can't get into Tagged. How do I undo this???
I went to Tools, Options, Privacy, and removed all cookies. Now I can't get into Tagged. I don't know what I did different, because I have removed cookies before and this did not happen.
Thank you so much! You're a genius! :-)
-
I updated my computer with the I Photo June 2012 program and now I can not open I photo or shut off the computer because I get a message that says "The library needs to be updated to work with this version of I Photo' I have no other updates to install. How do I update the library to get into I phootos. riderm622
backup your iPhoto library and download the 9.1 update and install it
LN
Maybe you are looking for
-
Battery health decreased rapidly after charging problems.
Hy a few weeks ago the health of my mid 2010 MacBook Pro was still 79% which is normal since it has more than 1000 cycles. Then following incident happened: My battery was almost discharged, 30% or so, so I connected it to the AC power. After a while
-
Best way to create animation in Flash and import into Premier Elements?
Very short, 5-10 seconds, very simple animation. I would like to import it as my intro but I don't know what file format to export as from Flash, that would import well into PE? I am using Flash CS5 and PE 10. On a Mac 10.6.8... Thank you
-
Error with Listener. ORA-00132: syntax error or unresolved network name
Hi all, I have been getting a strange error while trying to start the db. SQL> startup nomount ORA-01078: failure in processing system parameters ORA-00119: invalid specification for system parameter LOCAL_LISTENER ORA-00132: syntax error or unresolv
-
Hi! Is it possible to let the Lync Client run on the taskbar after computer start up instead of appearing on the screen? Thanks.
-
Report builder menu disappeared
hello all ! i am running report builder 6i, i have windows NT 4 installed on my machine, every thing was running fine till yesterday, but when i opend report builder today, the standard windows gui menu which contains all options like : File Edit Vie