HT2801 imac, osx 10.9.1, burning dvd problem, correctly does 80% of DVD then damaged area, flags write error, but obviously not as correctly does 80%

help please, my imac is burning part of a dvd correcly then ends with a damaged area and give the error message "write error", clearly there is no disc incompatability, it occasionally will burn correctly, I've tried cleaning the superdrive with no effect. I'm thinking of trying an external superdrive.

ken_sim: I have solved my own problem with an external superdrive

Similar Messages

DVD player say's it's skipping over damaged area when dvd is fine

I have a problem playing box sets from abc studios on my Macbook Pro. They play perfectly well through the trailers and set up but as soon as I select play all or select an episode, they stop and I either get the error message "skipping over damaged area" before they hang or they just hang straight away. This has happened with four different box sets so far. The DVDs are fine and undamaged.

We have had the same problem ever since we bought our machine 60 days ago... Here's where we are: DVDs, even brand new ones, skip - "skipping over damaged area" on our iMac while our MBP and MB play them flawlessly. There is no loss in the movie, only the pause in play.
Our software is up to date, we took it into Apple over three trips: 1.) had them clean our dvd drive, 2.) problem persisted so we replaced the dvd drive, 3.) problem persisted so we wiped out our entire hard drive and did a software re-install and update... and problem still persists! We are are packing it up for a fourth time and will take it into Apple to have them replace the machine or all the parts...
We're bummed, it's our 3rd Apple computer and the 'biggest' and yet it cannot do the simple things? We'll keep you posted as to what happens.

I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw)

Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting?

IMac is asking for admin login password upon startup when it never did before, settings are still on auto login. Why is it doing this out of the blue?

iMac is asking for admin login password upon startup when it never did before, settings are still on auto login. Why is it doing this out of the blue?

Is sounds like it might for some reason booting into Safe Mode, which does prompt for a password.
Try a PRAM reset:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that doesn't help, restart holding down the option key which should take you to the startup manager. Select Macintosh HD (you may need to use the arrows on the keyboard if the kb is Bluetooth), tap 'enter'. Does it boot normally now?

New screen from Apple in my iMac 24", and burn-in problems already?

Is there an engineering or manufacturing problem with the 24" iMac screens?
My last screen was replaced under warranty a month ago because of dimming/banding problems. It also had burn-in issues from early on, but I lived with them. However, I didn't expect a brand new screen to have such severe burn-in problems right from the start.
Here's what Apple says: http://support.apple.com/kb/ht2807 . In summary, they tell you that your problem is leaving images/text in the same place too long. Duh! But interestingly enough, I don't have the same burn-in problems on my PC laptop or cheap HP external monitor.
I spend hours at a time doing development, and often I'll have an IDE open that has a source tree on a left panel. That widget of text and icons won't change much, and I won't be moving my IDE window around because I have it maximized. It is a normal pattern of use that I can't really avoid.
Is this also a problem on the Apple external monitors? What about on their laptops? Must I move to a Mini with a Dell monitor? Are iMacs only intended for lightweight users that spend an hour or two each day shuffling windows around and watching TV?

In addition to my (now archived) thread:
http://discussions.apple.com/thread.jspa?threadID=1979518&tstart=0
I just had my screen changed under apple care. Excellent option, happy I got it, no hassle, but took three weeks to order and replace the display at the service center. It seems to be a known issue with numerous iMacs, to my surprise also with the latest models, and I have seen this problem on quite a number of iMacs, all over the world, only on the alu models. Though I cannot say for sure what the problem is, I have now installed smcFanControl to increase the minimum speed of the on board fans. Also, as I was suggested by the apple technician, have a screen saver for a few minutes before turning off the display (Energy Saver) to prevent any possible burn ins, (while I remain convinced this is not my problem).
Keeping my fingers crossed my problem will not re-appear, or that it WILL re-appear before the end of the 3 year apple care.

Nokia 8800 Arte and iMac OSX 10.6

Tried to synchronize the Nokia 8800 Arte with the iMac OSX 10.6. Bluetooth connection works, so exchange of films and photo's are OK. Synchronization via blue tooth iSync does not function because iMac does not have 'plug-in'. Nokia does not provide a solution. Also PC Suite for Nokia 8800 Arte and iMac OSX 10.6 is not available at Nokia support/downloads. Nokia support promised to ask for investigation of the possibility of developing and verifying a solution.

Hi PAHU, thanks for helping. I´ve tried 2 different and brand new cables and still nothing appears on the USB list in System Profiler. I´ve tried restarting both with printer and off, etc, still it aint there. Connecting my iPhone to the same USB ports, the iPhone shows up in System Profiler, so the ports must be ok.
I tried connecting the printer to my girlfriends Macbook Pro, OS X 10.6.4. and the printer does show up on the System Profiler. The printer seems to be online but when I tried to print a page of text, it "went offline" and gave an error 306A "communication error blabla". I downloaded a new driver from Canons site and now it says its printing, the printer starts blinking its green light, but nothing happens except it switches to saying the printer is offline.
This is very confusing...

Movie-DVDs "skipping over damaged area" all the time

I just wanted to share this with you to see whether others suffer the same problems before calling AppleCare.
I have a 20" 2,4 GHz iMac (Alu/Intel) which quite often gets a hickup when watching a DVD. Many times DVD player is claiming to skip over a damaged area. In fact, this only happens when the computer has been running for a while and gets quite warm and it obviously has nothing to do with the DVD media but with the iMac hardware as I can play these DVDs without a problem on a freshly booted iBook as well as on any DVD player.
Do you suffer the same? I find this rather underwhelming for a computer that costs 1500$ or more.
Thanks for your comments.
Message was edited by: krrrrrks
null
Message was edited by: krrrrrks
Message was edited by: krrrrrks

I can't help but wonder if this is an issue relating to whatever means has been used to burn the movies rather than the drive or the discs - particularly since commercial DVDs play properly.
It may be, for example, that the software used to rip or duplicate the originals has mis-read the original due to copy protection, and the disc is therefore not copied fully.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Serial Number (system):          7302300GANE
Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State:          Enabled

EDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!

DVD Player "skipping over damaged area"

My macbook has worked wonderfully for a year now. But as of late when I rent DVD's from blockbuster or family video some won't read very well. I always clean the DVD's before I play them and the ones that are having issues are the ones that look very very clean. It does the whole "skipping over damaged area" thing. It's rather frustrating. And the disks are in very good shape. It doesn't do it all the time. But now it's starting to become more frequent. It'll skip a few seconds sometimes and sometimes a whole scene. Any thoughts? I think I'm literally 3 days past my warranty.
Thanks
Message was edited by: secondtim45

Possibly a failing optical drive. Bring the computer to an Apple store as soon as possible, explain the issue, and see what the folks there have to say.
~Lyssa

When i try to burn my playlist it starts then stops and has a error code 4450

when i try to burn my playlist it starts the first song then stops and has a error code 4450

Hello Clubcon,
Thank you for the details of the issue you are experiencing when trying to burn a disc using iTunes. I recommend reviewing the following articles for steps to troubleshoot and resolve this issue:
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M.

I repeatedly get "error during rendering/encoding of menus/slideshow" message. This process is the same on my iMac, MacBook and another iMac. I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne Connelly

Thanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system):            1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision:     3AHB
Interconnect:    ATAPI
Burn Support:   Yes (AppleShipping Drive)
Cache:    2048KB
Reads DVD:    Yes
CD-Write: -R, -RW
DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne

Imac won't read my burned 16x DVD-r's - but reads 8x just fine?!?!

Hello.
I have been burning CD's and DVD's on my imac PowerPC G5 *(Burner: Pioneer DVD-RW DVR K04F)* for 2 years now with absolutely no problems. Historically, I've used 8x dvd-r's from many different brands and I use Popcorn burning software. Now suddenly, all the electronic stores are carrying only 16x dvd-r's, so I bought some (Maxell), but I don't think my imac likes them. I can burn a movie onto the 16x blank dvd-r using Popcorn and the burning process works fine, process completes without problem, etc. If I put the burned 16x dvd-r disc into my stand alone DVD player on my TV, it will play with no problems, but when I put any of these burned 16x discs back into my imac, the imac will spin it for 10 seconds and then spit it out. However, my imac continues to read/play any of my 8x dvd-r's or commercial dvd's without any problem. Also, no problems with cd-rs.
Anyone have any thoughts on what's happening here? I have cleaned the lens with one of those disc cleaners with the tiny brushes (I ran the cleaning process at least 10 times in a row just to make sure!). I also checked Pioneer's site and I see firmware updates for a handful of their dvd burners but nothing for the DVDR-K04 I have. I called Apple but sadly my AppleCare has expired, and their only advice was to run 'Software Update' but there's nothing in there regarding this issue. So I'm wondering if anyone here might have any suggestions or help?
Thanks for reading!!
BB

It could depend on what format the content is that is not readable - if you have access to the Windows machine, you could check on the format (and/or know the format if you burned it)? Is it just .jpeg's? Or did you make a slideshow resulting in an mpg2 possibly? In that case, you'd need to buy the MPEG2 Playback Component from the Apple Store (less than $20) because Quicktime can't read that format without the playback component.
Can the DVD be played in a regular DVD player?

I burned an edited movie to disc using H.264 codec and a second movie to MPEG -4 Video both worked well on my iMac but will not play on my Sony DVD Recorder/Player which accepts both DVD RW and DVD-RW. Any suggestions?

I burned an edited movie to disc using H.264 codec and a second movie using MPEG-4 Video. Both played well on my iMac but would not play on my Sony DVD Recorder/Player which accepts both DVD+RW and DVD-RW discs. I have tried other 'codecs' DV-PAL; DVCPRO-PAL; DVCPRO50-PAL; AIC; and finally share to iDVD. iDVD works on both my iMac and DVD Recorder but the picture is very poor with major shimmering which is unwatchable. Can anyone assist? The other codecs I used either do not pay on my video recorder or fail when I play them back on my iMac. I am at a loss as to what I can do. I am from the UK so using PAL is essential.

If the source video is interlaced, you may have problems using iMovie. It de-interlaces everything on output which can cause picture to look strange. Final Cut Pro X supports interlaced video, but it costs a lot more.
Standard DVD Players don't support H.264 or MPEG4. You might want to look at this article on transferring HD video to DVD. I wrote this article mainly for Final Cut Pro, but many of the same principles apply.

Unable to burn DVDs on iMac. Folders dragged to DVD window appear as documents. DVDs from same package burned OK last year. Using Lion. CDs burn OK.

Unable to burn DVDs on 2009 iMac ( Lion ). Folders and any files dragged to DVD window appear as blank documents.
Burned DVDs from same package ( Memorex ) last year OK. CDs burn OK. DVDs are several years old, if that matters.

The music is a tune that was purchased/downloaded from the iTune store. The slide shows (five of them) consist of digital photos (jpg) that I have taken. The interesting thing is that I also have an eMac (about three years old) that I have created the same iDVD project (identical music & identical slide shows). I have been able to burn a DVD disk of this project on my eMac WITHOUT A PROBLEM. The thing I do not like about the eMac is that I purchased family pack of iLife 6 last year (because I liked some of the new Themes). However, when I installed it on my eMac, for some reason it takes about 5-10 minutes to get iDVD 6 "up and running." Once it has loaded the Themes, however, I am "good to go." I've had this computer into the "Genius Bar" at the local area Apple Store TWICE and they are unable to get it to work more efficiently. The even reinstalled the entire operating system to no avail. So, the solution is to launch iDVD 6 on my eMac and then go do something else for 5-10 minutes. But at least I am able to burn my iDVD projects to DVDs.
With my iMac, iDVD launches quickly but is useless since I am unable to burn my iDVD slide show projects to DVD.
So, as a result, I am pretty much ready to "call it a day" with the iMac and will go back to my eMac.
Thanks for your time.
SCC Jeff

I downloaded some home movies onto my IMac but could not find a way to burn them to a DVD. Does Apple have software to do this or do I need to purchase one. If so, what is recommended.

I downloaded some home movies onto my IMac but could not find a way to burn them to a DVD. Does Apple have software to do this or do I need to purchase one. If so, what is recommended.

but could not find a way to burn them to a DVD.
Do you want to create a video DVD that will plan on a TV set via a DVD player or just burn the video files to a data DVD disk for storage?
If the former the read the following:
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Softwareor eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
However, there are video DVD authoring apps that are available at the App Store that will create a video DVD disk. They won't be as extensive as iDVD but can create a simple video DVD.
iDVD 7.1.2 is compatible with iDVD but we don't if it will be with the next system generation.

HT2801 imac, osx 10.9.1, burning dvd problem, correctly does 80% of DVD then damaged area, flags write error, but obviously not as correctly does 80%

Similar Messages

Maybe you are looking for