HT2801 MacBookPro does not show titles of cd^s burned on other computer

Hello anyone out there who can help. I insert a cd with music into my MacBookPro and it does accept it and it is running, but it does not show any titles. I know that the disc is full, because I have checked it on a PC. can somebody help?

Hi,
Please take a try to disable SMB2 on this client machine.
sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
More information, please take a look at the following KB article:
How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
Best regards
Michael Shao
TechNet Community Support

Similar Messages

The File Explorer does not show links in the folder structure on a computer

Dear all,
My general issue is that, when I connect my Z10 (SW release 10.2.1.2102) via USB, the File Explorer shows some folders from the connected PC. It does not list folders that are links on the computer.
A lot of those links are duplicates in a different language (because of the multilingual version of Windows 7). My particular issue is that I had to move my Documents folder to another disc and created a hardlink to that folder on the primary SSD disc. Now, this link does not show up at all in the File Explorer on my Z10 device.
Anybody knows a workaround, please? Maybe it exists another file manager similar to that one by BB, which could do that...
Thanks for reading!
Cheers,

If you look at the browser use stats you'll see that its kind of useless to preview your site in Safari...
Chrome is poised to overtake IE so its worth setting up your own local server. Its quick and easy.
From Mac Help..
Sharing a website on your computer
You can use the Apache web server software included with Mac OS X to host a website on your computer. Before doing so, you should already know how to create HTML pages and build websites.
To host a website on your computer:
Use the HTML editor of your choice to create your website. For your site’s homepage, use the filename “index.html” so that web browsers can locate and open it automatically.
Put all of your website’s pages, graphics, and any media files in your home directory’s Sites folder.The existing index.html page will be replaced with your new index.html page.
Choose Apple menu > System Preferences and click Sharing.
Select the Web Sharing checkbox.
To view webpages you put in your Sites folder:
Open a web browser and go to http://your.computer.address/~yourusername/.
To find your computer’s address, choose Apple menu > System Preferences, and then select Web Sharing. The address is displayed in the window.
For “yourusername,” use your account name, and make sure you include the ending slash (/). To find your account name, choose Apple menu > System Preferences, click Accounts, and then select your account in the list.
You can also share a website on your computer by placing files in /Library/WebServer/Documents on your hard disk. To place files there, you must be logged in as an administrator. To view these pages, open a web browser and go to http://your.computer.address.

Report does not show Title at first load (CR 11.5 SP3)

Hello
I load an RPT from the file system, and then load data using an ADO disconnected recordset. At the end, the Report object is asigned to a CR Viewer. When the report appears, the Title is not shown. One has to press the "Refresh" button on the viewer so that the Title appears. By the way, the Title is assigned by code.
Any ideas?
Thanks a lot.

Thank for the reply Dell,
I see the logic in adding the extra table and keeping it unlinked and I do know the crazy data that can come up if I use it linked to other tables or use the fields in other parts of the programming.
However, I've now tried it several times, creating the parameter on just the name alone, with the ID alone, etc. and I still only get a text box to type into.
I have made sure the original selection criteria
{customer.Id} = {?Customer}
if from the original table, not the new one, which I assume you expected me to do.
So I decided to run the same report through CR XIR2. When I update the Set Datasource Location, I am now getting the message
"Invalid Argument provided.
Details: The alias requested 'company', contains a combination of characters which is not considered to be valid"
Company is a table containing information about the main company, not the customers. The same message pops up for another table as well.
Then I get a message that says:
"Prompting failed with the following error message: 'List of Values failure: fail to get values. [Cause of error: The table company does not exist in the document.]'
Error source: prompt.dll Error code: 0x8004380D"
This appears to be a database access issue but I know the firewalls are not a problem because I can create a new report and get the LOV properly with the same database and same desktop computer. I can take that report created in CR2011 and use it in CRXI also and get the proper LOV. Is it possible I am dealing with template corruption because there were so many items imported into the static list before?

HT5569 I have a ipod touch and it has updated the device and is asking me to join a net work and it does not show any net works and ony has other but i dont know any networks so what do \i do

I have a Ipod touch and am un sure how to connect to wi fi it is asking me to connect to other but I dont know any so what do I put in there
cheers

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Not showing "transfer" option for iPod Shuffle to other computer

I have two authorized computers-a Windows XP (the first) and a Windows Vista I just authorized with iTunes 8. My iPod Shuffle works with the first computer (the XP) and will connect with it, but with the Vista, it only shows the "erase and sync" and "cancel" options in the pop-up box when I plug it in to my computer. How do I fix this problem?

If it helps, the computer it is not working on is a Toshiba Satellite.

Print & Preview of iBook does not show titles and comments.

iphoto used is 6.0.6 (322) I Don't know if this is a 10.4.11 or 10.4.4 problem.
problem: iBook prints contain pictures but not title or comments using Epson C60 or HP 1530 printers. Titles and comments are not visible in "preview" but picture is ok. Mac used is an intel Core Duo with system 10.4.4.
However, prints are ok, i.e., have title, comment, picture using the same HP 1530 or an Epson Stylus Photo 1250 on a Pwr PC G4 with system 10.4.11.
The Intel is the preferred unit.
Thanks, CB

problem: iBook prints contain pictures but not title or comments using Epson C60 or HP 1530 printers. Titles and comments are not visible in "preview" but picture is ok. Mac used is an intel Core Duo with system 10.4.4.
However, prints are ok, i.e., have title, comment, picture using the same HP 1530 or an Epson Stylus Photo 1250 on a Pwr PC G4 with system 10.4.11.
How are you previewing the the book? Have you tried the apple suggested methof for previewing books - http://support.apple.com/kb/HT1040
LN

Itunes device list does not show when i plug my iphone in to computer to backup

there is no 'device list' listed in itunes when i plug my
iphone in to backup on itunes.
how do i make 'device list' show up.
thx
deb

Hi! Have you run the latest software update?

Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

I answered my own question: There's a difference between "download' and "install." Hunt for "install" (1.5 hrs in my case) and line up your passwords, Adobe ID, etc, then install. Took 15 min. The right choice shows up in Applications. Now it's on to figuring out why photo selected for edit in iPhoto does not show up on screen in Elements.

Ipad does not show email from only one sender

I have my outlook.com email address setup to come to my Ipad. I have noticed over the roughly year that I have had it that email messages from one particluar sender does not show up on the Ipad. All other emails come thorugh fine it is just this one sender, which I receive email from on a regular basis. Any thoughts on cause or remedy for this? I have added the sender to my contacts list,checked the junk file, deleted and reintalled the email account all with no luck.

If they are not being received by the server, then this is not a Thunderbird problem. So, first you need to determine if your server is receiving the emails.
Logon to your webmail account using a browser, are those emails shown in the webmail account?
Are they in the webmail Inbox folder or another folder - check the spam folder?
Do you use an IMAP or Pop mail account?
If the emails are not in webmail account, then Thunderbird cannot see them.
If the server is not receiving the emails, then check that the sender is actually using your correct email address.

My iPod Touch does not show on itunes

When I plug in my iTouch to the computer and open iTunes, the device does not show on iTunes. I tried restarting the computer and reconnect the usb drive, but it still does not show. The device is recognized on My Computer so I think something is wrong with iTunes.

See Here for Device Not Recognised
For Mac
http://support.apple.com/kb/ts1591
For PC
http://support.apple.com/kb/TS1538
And Here for more Troubleshooting Tips:
http://support.apple.com/kb/HT1414

Approved App Does Not Show in the App Part Section.

Hi all,
I have successfully add an App from the SharePoint App Store to my SharePoint Site which was developed using SharePoint 2013. The added app was successfully Approved then when I try to add that app using the App Part to a web page I cannot Find it
in the App Part section. I looked in the Site Collection Features & Site Features I couldn't find the app to activate. I don't think I have done some kind of mistake. So then what else I have to do to add that App part to the web page.
Could someone try to solve this matter?
Thanks,
Regards,
Chiranthaka

Ok I found the solution from another thread & it is at the below!
Cannot Add
Approved App To A Web Page - App Does Not Show in the App Part Section.

My playlists show how many titles are in the playlist but does not show the list of titles

my playlists show how many titles are in the playlist but does not show the list of titles. Is there a setting that I hit by mistake to hide the content?

Perhaps you have made one column extra wide and the window isn't currently showing the Name column. Try resizing columns, turning off those that you don't need, or scrolling sideways.
tt2

I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
I'm not sure if anyone else has this trouble, but it is a bit of a pain!

XML child 'Title' does not show on web page

I have imported an XML file and when I launch the page the
title does not show.
The following is on my page but does not display "
<td><?xml version="1.0" encoding="UTF-8"?>
<Title>Miss Congeniality 2: Armed and
Fabulous</Title>xx </td>
The rest of the field do display and I can not understand why
'Title' Does not display.
Thanks for any help
David Merchant
The following is the code to display the data:
<cfloop index="MyCounter" from="1" to="#Counter#">
<tr>
<td>#mydoc.Collection.DVD[MyCounter].ID#</td>
<td>#mydoc.Collection.DVD[MyCounter].UPC#</td>
<td>#mydoc.Collection.DVD[MyCounter].ProfileTimestamp#</td>
<td>#toString(mydoc.Collection.DVD[MyCounter]["Title"])#xx </td>
<td>#mydoc.Collection.DVD[MyCounter]["SortTitle"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["Rating"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["ProductionYear"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["RunningTime"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["Audio"]#</td>
</cfloop>
This is the XML file I am reading
<?xml version="1.0" encoding="us-ascii"?>


<Collection>
<DVD>
<ID>012569557123.21</ID>
<UPC>012569-557123</UPC>
<ProfileTimestamp>2004-03-17
23:58:12</ProfileTimestamp>
<Title>Doctor Zhivago</Title>
<SortTitle>Doctor Zhivago</SortTitle>
<Regions>
<Region>3</Region>
</Regions>
<Discs>
</Discs>
</DVD>
</Collection>

I believe you want to print the XML node's text to a HTML
table cell. To do so you would change:
<td>#mydoc.Collection.DVD[MyCounter].ID#</td>
to
<td>#mydoc.Collection.DVD[MyCounter].ID.XMLText#</td>
Try appending ".XMLText" to your variables.
I would also consider droping the ToString method with:
<td>#toString(mydoc.Collection.DVD[MyCounter]["Title"])#xx </td>
to
<td>#mydoc.Collection.DVD[MyCounter]["Title"].XMLText#</td>
I don't know why you are invoking the toString() function
here and not on the other nodes. It only confuses me, and likely
you when you have to return to this code later, unless you are
trying to do something special with this node, like set your HTML
<title> tag.
If you are trying to set your document's <title> tag
then it should belong between the <head> tag of your document
and not inside your table, as a matter of semantics.

HT2801 MacBookPro does not show titles of cd^s burned on other computer

Similar Messages

Maybe you are looking for