HT2822 Can i connect Apple TV to my iPhone 5 network

Can i connect Apple TV to my iPhone 5 network

I've not tried it, but it should work - Personal hotspot wifi should use WPA2 Personal encryption and g or n speeds.
http://support.apple.com/kb/ht4517
Not sure if iPhone would work as a router to connect several devices eg computer via wifi to allow itunes content on computer to stream to appletv.
I've used a mifi 3G device to accomplish this kind of thing in the past.
AC

Similar Messages

  • How can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I have ask this question in the local shop but they could not answer me - how can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
    Thanks.

  • Can i connected apple tv to my mac and i pad as well?

    can i connected apple tv to my mac and i pad as well?

    Not directly. You can use airplay or mirroring to stream or display content from those devices

  • I have only one HDMIport wich is occupied, how can I connect Apple tv

    Hello,
    I have a Loewe tv with only one HDMIport. This port is occupied for digital TV. How can I connect Apple TV. I saw that the former Apple tv had Component ports, but the new one does not.
    Help please.

    You might consider getting yourself a HDMI switch.

  • I can not connect my ipad2 or my iphone 4s to itunes. when i connect either one it says "Can not connect beacause apple mobile device service has not started". PLEASE HELP!!!!

    I CAN NOT CONNECT MY IPAD 2 OR IPHONE 4S TO ITUNES TO SYNC. I WAS HAVING PROBLEMS WITH IT EARLIER AND FIXED THAT BUT NOW WHEN I CONNECT THEM BOTH THEY DO NOT CONNECT!!! CAN ANYONE PLEASE HELP!!

    There are instructions on this page for starting the AMDS, and how to set it to start automatically : http://support.apple.com/kb/TS1567
    For future info, typing in all capitals is considered SHOUTING

  • I have a MacBook Pro.  My mac can detect wifi.  But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest.

    I have a MacBook Pro.  My mac can detect wifi.  But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest. (Network settings, ISP, Internet and server.)

    Hello NotAppleSavy,
    Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Connect Apple TV to ad hoc network

    I want to use AirParrot to mirror my Windows 7 to my Apple TV, but it doesn't connect a lot and is slow when I do it normally.
    So I decided to create an ad hoc network on my Windows 7 Machine in hopes that I could have my TV connect to it.  But it isn't showing up in the list of networks.  How can I have my ATV connect to the network?

    did the google'
    https://discussions.apple.com/thread/4003835?start=0&tstart=0
    more hits
    https://www.google.dk/search?source=ig&hl=en&rlz=1G1TSEH_ENDK367&q=Connect+Apple +TV+to+ad+hoc+network&oq=Connect+Apple+TV+to+ad+hoc+network&gs_l=igoogle.3..0.13 51094.1351094.0.1351539.1.1.0.0.0.0.108.108.0j1.1.0...0.0...1ac.1.sKDJ0Gkm0Pk

  • Can't Connect AirPort Express to existing WPA network

    I just bought an AirPort Express and I can't connect it to my existing Wireless network where I use WPA based security.
    I've both tried to use the Configuration guide and done it manually with the Admin tool but it just will not connect to my Wireless network.
    Less of changing form WPA-PSk to WEP128 I think I have tried "everything".
    Any ideas?

    Can you changed your router to use WPA:TKIP as opposed to WPA:AES?
    When I changed my router to WPA:TKIP, my airport express connected, but with AES it doesn't!
    This is not good, since according to Wikipedia, AES is superior and considered part of WPA2, which Apple claim they support (and yes I am using firmware V6.3)!
    Hope this helps!

  • Can't connect computers to printer (b210) via network because there are "other networks"

    I can't connect computers to printer (b210) via network because there are "other networks matching your network name".  This makes no sense at all. I have several Apple devices (iPhone, iPad, iMac) all with the latest software. The printer works fine when using the USB connection to my iMac. Nothing I do seems to solve this problem (rebooting, re-configuring, etc.). Help.

    Hi Cgold,
    If there are other networks matching your network name, then the printer will have issues connecting when you run the wireless setup wizard.
    However, there are other options:
    If your router supports 'Wi-Fi Protected Setup' with either a button to push on the router, or a pin to enter, you can choose that connection option under the wireless menu on your printer.
    or
    Change the network name that your router is broadcasting within the web page of your router (NOTE-this would force you to re-join all wireless devices back to the new network name you have created).
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • I can´t connect to iMessage in my iPhone

    I can´t connect to iMessage in my iPhone.
    When I try to connect via Settings/Messages/iMessage, it informs "An error ocurred during activation. Try again"
    If I try to connect using my Apple ID after some seconds displays a message that says "iMessage Activation. Could not sign in. Please check your network connection and try again." while i´m connected to WIFI at that moment.
    My current status Settings/Messages/iMessage when I activate i Message is "Waiting for activation...".
    Anybody knows how to solve this.
    Thanks in advance!

    Anthony I tried this, to connect using my Apple ID and after some seconds displays a message that says "iMessage Activation. Could not sign in. Please check your network connection and try again." while i´m connected to WIFI at that moment.

  • Can I connect a Macbook to a wireless network for PCs?

    I would like to purchase a Macbook but I would like to figure out the extra costs before buying. I currently have a Dell Inspiron 600m notebook that connects to the linksys network in our house, can I connect a Macbook to the same network or is there another package I need to buy?

    The other users may know more about this than I and dispute with me, but I can tell you from personal experience that sometimes there are problems. At this very moment, for example, I am at a buddy's house who has a wireless router hooked to his pc and my apple FIRST displayed one internet page and then flaked out on me. SECOND showed an airport signal but could not connect to any sites. THIRD showed no airport signal at all.
    The solution is to plug directly to the router with an ethernet cable and it always works.
    The other solution is to unplug the router for 30 seconds to reset it everytime you switch between a pc and a mac. The cable company gave me this handy solution which they claim is a constant necessity. BUT I have found it is in fact rarely needed at home where both pc and macs are running. But still sometimes I have to do it.
    So if there is some pattern to all of this I cannot find it. But there is no "extra" hardware required, just some occasional software failures.

  • HT204023 can't connect - been through Verizon support. iphone 4S version 5+

    Hot Spot Can't connect - been through Verizon support. iphone 4S version 5. Anyone else have trouble connecting?

    IOS troubleshooting personal hotspot http://support.apple.com/kb/TS2756

  • Can't connect to computers on the same network and same office

    Hi everyone, I have this problem from some time now, I have on the same network some computers with ethernet, and some with Wi-Fi.
    All are connected to the C-Net Wireless-G Router.
    My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area, but I have an iMac 2.0 next to my iBook and I can't see it.
    How is that possible? Am I making something wrong with the subnet mask or IP address?
    All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
    The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
    Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
    If anyone could give me a hand here, I will apprettiate the advice.
    Thaks to everyone, Pablo from Argentina.

    rccharles wrote:
    All are connected to the C-Net Wireless-G Router.
    My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area,
    but I have an iMac 2.0 next to my iBook and I can't see it.
    How is the iMac 2.0 connected? cable or wireless?
    iMac is on Wi-Fi.
    How is that possible? Am I making something wrong with the subnet mask or IP address?
    You are on a different subnet. In x.x.x.0 the x's are different.
    All the computers are in the same subnet, cable ones and wi fi ones.
    All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
    The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
    Look at what ip addresses you have on each machine.
    I have different IPs on each machine, do you need the numbers?
    Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
    Macintosh-HD -> Applications -> Utilities -> Network Utility.app
    Use the ping command to see what is going on. Ping 192.168.1.254, source & destination machine. 127.0.0.1 is an alias of the machine you are on.
    !http://farm3.static.flickr.com/2575/4090068351_6fb8dc3d55.jpg"!
    check out port scan. This will tell you if sharing is on.
    !http://farm3.static.flickr.com/2506/4090068193_7566e620cf.jpg!
    I will try this
    Message was edited by: rccharles

  • Can anyone tell me why I can not connect my Blackberry or my iPhone to my new Macbook pro? I had no problem with my old Macbook.

    Can anyone tell me why I can not connect my Blackberry or my iPhone to my new Macbook pro? I had no problem with my old Macbook.

    What type of headphones were you using? I have a set of Microssft headsets, with the built-in mic and connected via USB, and have no problems.
    Clinton

  • I can't connect to other computers on my network with computer names. Any suggestions?

    i can't connect to other computers on my network with computer names. Any suggestions?

    In what way are you trying to connect? File sharing? Printer sharing? Screen sharing? Something else?
    How are your computers connected to this network? What happens when you try to connect to them?
    Best of luck.

Maybe you are looking for

  • External tables in oracle 8i

    Hi, I am working in Oracle 8i. I need to use Oracle 8i External Table to load data in the database. But I am getting the following error ORA-00922: Missing or Invalid Option The snippet which I used is as follows: create table ext_table_csv ( a NUMBE

  • How do i get my photos from photo stream to my mac?

    Hey guys, i recently restored my iPod touch because I forgot my password. I lost all of my valuable photos, but before I forgot my password, iCloud was turned 'ON' with Photo Stream activated. So i expect my photos to be on the cloud. Can anyone tell

  • Solaris 8 (Intel) Install

    I just downloaded solaris 8 and i stuck the cd back into the drive on one of my windows machines and there were only a couple files that werent that big. When it burned it said it burned 550mb and it took long enough so is it just that windows cant s

  • Re CS5 Ruler tool has stopped functioning. How can I correct this problem?

    Re CS5 Ruler tool has stopped functioning. How can I correct this problem?

  • Accessing WLS MBeans (8.1 + 9.2)

    Hello, I'm currently porting an app from WLS 8.1 to 9.2. One difference is the access to the WLS-Runtime-Konfiguration. In 8.1 we did this via weblogic.server.Server etc. Now in 9.2 I have to use the JMX conforming way described in http://e-docs.bea.