HT2845 Mac Pro and bluetooth compatibility

I have a Mac Pro that has OS Lion installed, but bluetooth doesn't seem to be available on the computer. I am trying to connect a Magic Mouse. What is the best way to do so? Is the USB-bluetooth method the easiest and cheapest?

I installed the most recent patches a few days ago. Shortly after, the Might Mouse and the wireless Apple keyboard started dropping out, as often as 10 times a day. Turning bluetooth off and on appears to clear the problem temporarily. Fortunately, with the trackpad and the MBP's keyboard you can take quick action without resorting to a plug-in mouse and keyboard.
Otherwise, the MBP appears to be relatively stable, but not the 100% I had become accustomed to with older macs. I find, for example, that occasionally the machine can be cranky when waking from sleep. The bluetooth problem is right at the surface and quite annoying. It's not at all obvious what's triggering it.

Similar Messages

  • Mac pro and bluetooth/ m. mouse bt

    hi!
    i bought a new mac pro last week! it's my first apple computer and i'm so exciting.. but there's a problem..
    i have the bt and airport module built in, now i have also the bt apple mouse and keyboard.. the keyboard is ok, but the mouse is slow and skip in the screen... i also used an alternative driver/software but the usability is the same.. now i called Apple phone service and they send my a new kit bt (mouse and keyboard)..
    i read that many people have the same problem.. well, what can i do in order to fix the bt problem with my mouse wireless?
    there's a pic's guide? help me! anyway can i add a dolgle bt?
    thank's a lot guy!
    sorry for my bad english

    Very interesting. After reading your post I was reminded of some threads I looked over weeks ago and forgot about, relating to this very problem.
    I unfortunately assumed that I would actually need to open up the case and play with the wires just to disable the internal BT module so that I could connect a BT module.
    Then I noticed that a few people seemed to be saying that they connected a dongle without playing with any wires, and things got better.
    So I tried it! And it works!
    I just plugged my D-Link DBT120 ( http://www.dlink.com/products/?pid=34 ) into the back of the cinema display and the internal bluetooth seemed to instantly turn off and switch to the new dongle. Of course with that both the BT keyboard and MM disconnected and I needed to use the old wired MS mouse to get them connected again, but once they were they were at full speed!
    The BT MM still isn't anywhere near as fast as the MS wired mouse but it's quite usable and many times faster than it was while using the internal BT module.
    Here are a few of the other threads related to this problem:
    http://discussions.apple.com/thread.jspa?messageID=4353470
    http://discussions.apple.com/thread.jspa?messageID=3095257
    http://discussions.apple.com/thread.jspa?threadID=633522
    @ imax05 - I'd recommend getting a separate BT dongle. They're quite cheap and fix the problem. I know, it's annoying having payed for an internal BT module but...
    Mac Pro - Two 3.0GHz Quad-Core Intel Xeon 5300 series   Mac OS X (10.4.9)  

  • Mac Pro and monitor compatibility

    Hi
    Just ordered a new Mac Pro (ATI Radeon HD 4870 512MB), couldn't afford an apple display.
    I'm looking to take advantage of the dual monitor option.
    Can anyone tell me whether I need an adapter to connect the following monitors? Or even if the following monitors will work with the NEW Mac Pro?
    Main monitor - Samsung T220 22" TFT Monitor 1680x1050 20,000:1 2ms VGA/DVI.
    Secondary monitor - Dell E151FPp 15" VGA.

    Be careful about mixing the 4870 with third party monitors. Make sure to test it out thoroughly before you return period is up. There have been display issues with the 4870 and any third party monitors. It is not guaranteed, however quite common.
    Check for mouse jumping, display anomalies, etc. The monitors listed should work however, it seems you need two adapters:
    This one should be included with your mac pro:
    http://store.apple.com/us/product/M8754G/A?mco=NDcyMDY3OA
    It depends on which monitors you want to hook up, but there are also these adapters:
    http://store.apple.com/us/product/MB572Z/A?mco=NDcwMjAzMA
    http://store.apple.com/us/product/MB570Z/A?mco=NDY5Nzg0OQ
    You could just hook your samsung DVI to DVI, then use the MDP to VGA for the Dell, however make sure to read the reviews carefully, as MDP to VGA (and MDP to DVI for that matter) hasn't had a really great track record according to a lot of people.

  • I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

    I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

    What specific KB?
    Do you know it works?
    I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

  • Mac pro 2009 bluetooth problems

    Hey guys. gals... so... if you followed y previous saga of the quad core, you know it just got replaced by a eight from mac fro various maladies and problems. Yay me. Except..... the bluetooth f'n ***** on this thing....
    It took an incredibly long time for it to pair with the keyboard... then the ghost pop up says "connection lost" like every 4 minutes if you aren't typing on it. which if you run photoshop day and night like never happens. So..... yeah. Mouse practically doesn't work either works half the time or super slow or like not at all.....
    So....whats going on? I tried to plug in my old bluetooth adaptor from the quad core (which had an airport card that also died) and it tried to set up some sort of pan network, then the almost working bluetooth died, so I couldn't click around..
    oh.. and I restored my entire system from time machine if that matters...?
    Questions... if this is the fatal flaw in the mac pro line.. thats bad. So.....how do i
    -turn off onboard bluetooth
    -engage usb mounted bluetooth.
    Thanks
    m

    I'm having similar problems with a brand-new Mac Pro 8-core. Mouse cuts out (I'm using a wired keyboard thankfully) and my Jawbone headset will work wonderfully with my old MacBook Pro but will only pair (maybe) on my Mac Pro.
    Called and spoke with an expert and feel I get the run around. He had me shut down and unplug everything for 30 seconds. I did it but felt he was just having me "do something" to get me off of the line.
    Apple has a problem with Bluetooth on their Mac Pros and isn't dealing with it.

  • Mac pro Jumping Bluetooth mouse fix

    Hi found these links & thought I'd share after having to do the below external antenna mod myself to fix my poor Bluetooth signal strength between my 2010 mac pro my magic mouse.
    It worked a treat!!! Thank you Nobblynoel!
    How to test your Bluetooth:
    http://nobblynoel.wordpress.com/2010/06/07/how-to-check-your-bluetooth-connectio n/
    How to fix mac pro Bluetooth:
    http://nobblynoel.wordpress.com/2010/04/25/mac-pro-2009-bluetooth-fix/
    Please post if you found this useful & thank Nobblynoel.

    We already have a 22 page discussion on this topic where the various methods are discussed and if memory serves, those, and other, links are mentioned.
    See: Poor Bluetooth reception and jerky mouse
    Update: see around page 14 of that discussion.

  • Going between Mac Pro and G4 laptop

    Hi - I am needing to go out of town for a month and I need to keep working as business as usual with my system. In the past, I would clone my older G4 tower system drive to my G4 Powerbook and then back again when I returned home. This worked perfectly.
    (Using 10.5.7)
    Recently I upgraded to a Mac Pro and I know that with the Intel processor I cannot clone back and forth anymore since my Powerbook is a G4.
    How can I keep my computer, mostly Mail, Dreamweaver and iCal, synced so I can keep my workflow with a good transition? My data is on a separate external drive that travels with me. I'm not worried about applications as I still have them installed on my Powerbook pretty much in the same way as my MP is set up.
    #1 - I really need to have all of my Mail accounts (pop3) data - the sent and received messages - to be duplicated between the two systems before I leave and then when I return to the MP system. My Dreamweaver account settings would be important as well since I need to manage about over 100 different accounts and it helps to keep them current as I am frequently adding and editing account login data.
    Suggestions?

    If you copy the entire user folder you will also copy the /Home/Library/ folder. Although this isn't necessarily a problem, if you have PPC plug-ins for contextual menus, preference panes, or input managers they will no longer work on an Intel machine. You would need to replace them with universal binary versions for compatibility. For more about migration from a PPC see the following:
    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
    will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Target Disk Mode.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    MacBook Air- Migration Tips and Tricks;
    MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/ (copy the whole folder)
    /Home /Library/Calendars (copy the whole folder)
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.
    Revised 1/6/2009

  • I just got my first mac pro and I can't get the photos out of iPhotos moved on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. Thank you so much

    I just got my first mac pro and I can't get the photos out of iPhotos and move them on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. what to do? Thank you so much

    How is your external drive formatted? Use Disk Utility to check the volume format. If it is NTFS, you will need to reformat the HDD as exFAT in order to retain universal compatibility (RW to it on both Mac and Windows).

  • I just purchased a mac pro and i wanted to know if they bring microsoft installed already or would i have to purchase it?

    i just purchased a mac pro and i wanted to know if they bring microsoft installed already or would i have to purchase it?

    You would have to purchase Microsoft Office for the Mac, if you want genuine Microsoft Word, Excel, and Powerpoint. There are other less costly compatible and work-alike products available.
    To install Microsoft Windows, you need to buy Microsoft Windows software, run BootCamp software and partition your Boot Drive, then install Microsoft Windows in its own disk partition, which is a fairly complex process. Then, while running Windows, Install whatever other Windows programs you would like to run. None of this is necessary to simply read and write Microsoft Word or Excel documents.
    There are other compatibility options that you may find adequate for other Windows programs. What do you want to run in Windows?

  • Just got the mac pro and mouse will not connect.

    I've googled the heck out of it and can't find anything wrong.  At this point I don't know what else to say but, the mouse isn't working. Checked batteries, went through ALL processes, and nothing seems to work.  All I get it the green status light blinking or it will say it's connected for 30 secs but doesn't do anything. If anyone else has any other help or info I would appreciate it.

    Sprad05 wrote:
    If anyone else has any other help or info I would appreciate it.
    How far is you mouse from the back of your mac pro and is there anything between those two points?  Beyond about 3 to 4 feet the MM on a mac pro for many people is problematic.  Here's a 24-page thread on this topic:
    Poor Bluetooth reception and jerky mouse
    Bottom line, use a bluetooth dongle (that what I use -- IOGear GBU421) or wire up an external antenna to the bluetooth card inside your mac pro.
    As an experiment you could try doing a smc and pram reset and keep the mouse close to the back of your machine and seeing if it pairs up and stays connected.

  • " help me please"  I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

    " help me please"  I have Windows 7  32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
    I have to boot with a Windows
    When I use the Mac operating system not have a problem  and DisplayPort to VGA Adapter Working properly
    why does not work with windows ?
    What should I do؟
    I'm grateful to give advice
    tanks
    [email protected]

    Someone in another section answered this. Thanks.

  • I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop.  I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library.  Any thoughts?

    I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop.  I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library.  Any thoughts?

    download the installation files and install using your serial number or adobe id,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I have Mac pro and firefox 3.0.19.I am trying to download a video from youtube.? I can see the video. I want to download it and save in my computer to see it again. I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me t

    I have mac pro and firefox 3.0.19
    I am trying to download a video from youtube.?
    I can see the video. I want to download it and save in my computer to see it again.
    I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me the choice of place to save,and when I click and choose desktop , for example, this message comes ."Conversion requires an external application that appears to be missing on your system. Configure conversion ?
    When I click on okay, another page comes, which says" converter and a box next to it . in the box is written FFMpeg. but I can change it to MEncoder. In another box, says configure conversion rules. When I click on it, nothing happen.Thanks for your help.
    == This happened ==
    Every time Firefox opened
    == I want to download a video from youtube

    No, this reply is not helpful. It simply generates this little gem:
    "This service requires the conversion feature to be enabled.
    Configure conversion ?"
    And the same clicking on buttons that makes nothing happen and going around in circles with the escape key.

  • I have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

    i have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

    No not bothered about sycing apps etc it is all about calendars and maybe notes. IN terms of how its done I just want it the easiest way and preferably so that if an entry is made on one calendar then it populates the other.
    Thgius is beacuse I have my work diary on outlok, which I then link with my ical. I want to make sure that information is then shared with her.
    Chris

  • My 5yr old iMac will not connect to the Internet. All other computers in the house will, including my Mac pro and iPad. What should I do?

    My 5yr old iMac will not connect to the Internet. All other computers at home will, including my Mac Pro and iPad. I'm at my wits end. What should I do?

    Which OS are you using (update your user profile).Try a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.

Maybe you are looking for

  • Apple Pro speakers with mini jack connect to new Intel iMac ?

    I would like to be able to connect the pair of perspex globe Apple Pro Speakers with mini-jack that came with my PowerPC G4 Mac to my new Lion desktop Intel iMac. However, the mini-jack is too small for either the ' audio in / optical digital audio i

  • Mail won't open following update

    A few weeks ago I got a pop up asking me to update mail. I did this but since then it won't open properly. It either freezes without any viewer window showing or a viewer window comes up but is completely blank. Anybody have any suggestions? I book  

  • Error When Trying to Repair HD - Want to Save Files - Help

    Inexplicably, when I went to Restart, the screen got stuck at the grey apple with the spinning gear. Called Apple and they helped me reset PMU on bottom of console, then run Disk Utility to try to repair the HD. The error message that came up was "Th

  • Common dist channel and common division

    Hai guys,   can any one send me configuration setting and screen shots on common division and common distribution channel in ECC 6 version. my email id is [email protected] regards, Shruthi

  • Can you run logic 6 pro and logic 7 on the same PPC?

    I was wondering if you could run logic 6 and logic 7 on the same computer.