HT2930 The amp effects noisy. It's a show stopper. Other apps (ampkit, etc) are quiet. Anyone find a solution? iPad 1 iOS 5.1, GB 1.2.1
The amp effects are way too noisy. It's a show stopper. Other apps (ampkit, etc) are quiet.
Apples answer to use noise gate is a band aide over a software problem.
Anyone find a solution?
iPad 1 iOS 5.1.1, GB 1.2.1
You should be able to simply sync with iTunes again in order to reload all of you apps and media. That is why iTunes prompted you to transfer the purchases. You may have to select all of the content again when you click on each tab in the iTunes window on the right, but the content should be in your iTunes library.
You should also be able to restore from the backup that iTunes created before the update took place in order to restore your app data. When the iPad is connected to your computer and with iTunes running, right click on the iPad on the left side and select "Restore From Backup". A window will popup with a drop down list of all of the available backups for the device. Select the one that you want to use and restore from it.
Similar Messages
-
I have a button in JSP page inside an UIWebView by pressing the button i want to run another
existing iPhone native application in background only.Do anyone have a solution for this.Sounds like a virus.... I hope it's not...
Launching Other Apps within an iPhone -
i have an iphone 4 and i have upgraded to ios 5. but after upgrading all my apps disappeared and in the summary tab in itunes it jus shows as other data..! please help
When I went to reload my phone it gave the option of restoring with icloud or itunes so i chose itunes (assuming icloud would have many more bugs). Afterwards, I had no music and 6.6g of other.
What I did was go into itunes, clicked my iphone 4, and clicked on each of the top tabs (summery, info, apps, ringtones, music, etc.) and ensured I had them all clicked onto sync/selected playlist etc.As my phone restored, the 6.6g of other dropped to .99g of other.
Unfortunately, all my songs are gone but everything else seems to be in tact. I don't think there is any way around this issue for now with the new ios 5 update when syncing either an ipad or iphone. I have an ipad 2 but am going to hold off on updating it until apple gets the bugs sorted out because, I'm sure you will agree, getting the music back to where you want it to be is a total nightmare and takes ages to not only pick the right songs and artists to put on it, but also the ones that will fit correctly with the space, depending on the size you have.
I hope that helps. -
I updated my iOS to 7 yesterday. But my music app doesn't show the 'Radio' button as the online videos and Apple website claims. What could be the reason and how to fix it. All other apps, swipe up/down seem to be working fine.
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
I downloaded the recent software update Mountain Lion and now my microsoft word, powerpoint, etc. are no longer supported. Why is this? What can I do?
Depending upon how extensive your library of legacy Microsoft Office data files are, you may want to consider continuing to use Microsoft Office 2004.
Microsoft Office's 2011 version is compatible with Lion and presumably either works with Mountain Lion or an update will make it so. The problem with this approach is that Office 2011 will "convert" your earlier data files and there lies the rub! For example, I have the need to weekly open a chart created in Excel 2004, but Excel 2011 trashes the chart in its "conversion."
So I have approached the overall problem differently.
The reason your applications do not work in Mountain Lion is that they were written for the older PowerPC CPU that all Macs used up to 2006. When Apple made its transition to the Intel CPU, they licensed software that they included in all versions of OS X (from Tiger to Leopard and optionally, Snow Leopard) called Rosetta.
Rosetta miraculously allows PowerPC applications to work on the Intel processor transparently; you do not know it is even present.
The problem is that after 6 years of the transition, Apple's license to use the underlying software expired for OS X Lion and all version thereafter (and it is doubtful that the current owner of the software, IBM, would relicense it, even if Apple were inclined to do so).
So for those of use that need to run Lion, I have offered the option to install Snow Leopard (with Rosetta) into Parallels 7:
[click on images to enlarge]
And now Mountain Lion:
Full Snow Leopard installation instructions into Parallels 7 are here:
http://forums.macrumors.com/showthread.php?t=1365439
Snow Leopard is $29 and Parallels 7 is $79 retail (cheaper from competitive sources) and Parallels offers a 14 day free trial of Parallels 7 on their website:
http://www.parallels.com/download/desktop/ -
just updated to ios7. when i add events to my calendar i don't see a dot or the event on my phone, but it shows up on my computer. why are new events invisible on my phone?
Are you sure .mov files worked on the iPhone without a third part player? I'm just not sure...
Try these instructions from Apple:
Convert a video to work with iPhone: Select the video in your iTunes library and choose Advanced > “Create iPod or iPhone Version.” Then add the converted video to iPhone. -
I use a desktop version of Lightroom and am wanting to move to the Cloud version. What happens to my files, etc., on my desktop when I download the cloud version? I don't want to lose my metadata, etc. If anyone out there knows, please let me know.
I just installed LR CC and am having trouble opening catalogs where I followed the instructions to upgrade. Just posted a question about it.
Discovered a problem when I went looking for some images that were not included in the most recent catalog. After opening up a couple of older ones and upgrading, I went back to the most recent and couldn't opening. Message says it is not writable. And also says it may be due to incorrect permissions. If you have any suggestions for this, I would love to hear them. -
I can't open almost any app on my iMac (OSX Lion 10.7.4). Every time I attempt to do so, the affected app "unexpedtely quits", showing a window (sort of expanded dialog box) with the log history, wich form a complete report wich is said to be sent to Apple. Despite that this window has a "restart" button, I haven't been able to go any further from this point, as it repeats the process again and again, impeding me to use the affected app.
This has get to a critical point, as it is afecting apps like iTunes (especifically when I turn to the iTunes Store from within te app), MacApp Store, Software Updates (I can't update anything, given this problem) and many other apps, including Aperture 3, Fusion 4, integrated Dictionary and Wikipedia, as I've been able to verify.
As far as I'm concerned, it hasn't affected apps like Office, Vectorworks, Pixelmator, iDraw, Quick Note...
Can anybody help me on this matter?
Thanks a lot, in advance...
MarcusUse Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
-
Drugging does work on graphic apps such as Pixlemator or Previews, but not on TexitEdit. It only shows URL.
Hi foxnao,
This is a known issue with Firefox 12. You can see the bug here: https://bugzilla.mozilla.org/show_bug.cgi?id=749527
It is fixed in FF 13 that should be release very soon. If it is big inconvenience you could download the Beta now.
Hopefully this helps! -
The keypad sensors are going haywire. Only Messages has this problem. The other apps with messaging like FB messenger are functioning well.
And its not just with typing; even with scrolling up or down, the sensors wont cooperate. Pfft.venicespent,
Boot into your Mavericks Recovery partition by hold down the command and R keys whilst booting. You'll see a screen that looks like this:
Click on the Disk Utility item to open Disk Utility. You should see your boot drive (usually named "Macintosh HD" unless you've changed it) in the column on the left of the screen. Select your boot partition and click on the "Verify" button. Let your Mac do it's thing - if you get green text telling you that everything seems to be OK, then your disk should not be damaged. If, however, you get red text telling you that the disk needs to be repaired, click on the "Repair" button. If the disk can be repaired, you should be good to go. If the disk cannot be repaired then the drive is damaged.
But before you do anything, make certain that you have backups!!!
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display -
What does the "other" consist of in terms of what your iPhone holds? There is music, apps, photos etc.... what is the other?
See -> What is "Other" and what can I do about it? by Kappy.
Clinton -
Hi
Have just changed my phone and network. Now have 5c.
Previous I had 4s as does my husband.
When he got his phone he connected it to our Apple Mac and from that point on
Our phones became as one as he did not name his!!! This has been so
Annoying in terms of apps and contacts appearing and disappearing!
As it happens I don't have an iTunes library so can create that at later date.
How do I seperate us now I have new phone ?
Do I get a new apple ID or just name my phone or will it be ok now that we have
different handsets?
Please help I won't want his apps and music and he won't like girly stuff either!
ThanksHi janey73,
Thanks for visiting Apple Support Communities.
If you haven't already, you can create your own Apple ID on the web by following this link:
My Apple ID
https://appleid.apple.com
You can also create an Apple ID using iTunes on a computer or iOS device. See this link for the step-by-step instructions:
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/ht2731
Once you have created your own Apple ID, you can sign out of the Apple services that are currently using your husband's Apple ID, and sign in with your own.
This article has instructions for doing so with specific Apple services:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Regards,
Jeremy -
I've spent an hour on this: massively frustrating. My custom ringtones disappeared from iphone when I just sync'd and now show up in itunes/iphone interface (on the mac) grayed out: won't sync to phone. I know the audio files work because they were fine two hours ago! (iphone 5 running 8.1.3)
I had this problem too after i upgdatd to OS X Mavericks... only the songs on my iphone 5s that i purchased from itunes would play.
i read something about it being a syncing issue. when you plug your phone into your computer with the usb cable, the person said to switch from automatic syncing of itunes to the "manual" option. mine was already set to manual so i wasn't sure anything would work. BUT, when i plugged my phone into my computer, it started to sync all of my music on my phone again (top of itunes bar where song playing/time is listed said "now syncing 123/534 songs to x's iphone"). once that was completed, i checked the music app on my iphone and everything was back to normal!
so, i would suggest setting your music syncing settings to manual if you haven't tried that yet!
hope this helps! -
HI. I purchased an IPad model A 1460 which was supposed to have an 1.4 ghz A6x chip. The hardware configuration however shows that my IPad has an A5x chip. How can this issue be resolved ?
How are you getting this "hardware configuration" information?
If you are using a third-party app, most likely the app is not up to date and does not know about the newer iPad processor to show information about it. -
Read the Subject
I am reading the subject and I think I know what you are talking about. I would imagine that many users are not going to know exactly what you're talking about.
If you are connected to iTunes and you see all of the storage is being aken up by "other", something got corrupted when you downloaded the update. Restore your iPad in order to fix it.
I sure hope that you backed up before you updated. Here is the information that you will need.
http://support.apple.com/kb/HT1414
Maybe you are looking for
-
Media Encoder won't import MXF files from Canon XF100
I'm running Media Encoder CC on two laptops: a macbook pro and a macbook air. Both systems are running the most recent version of Media Encoder CC (including updates) but only one will import MXF files from a Canon XF100? The macbook air imports and
-
Integrating XI 3.0 with PI 7.1 directly
Hi We have a need to directly integrate XI 3.0 ( SP23 ) with another Pi 7.1 ( SP7 ). Can we use XI adapter type to do this communication - has anybody out there done this and not faced issue using XI adapters to do this owing to this version diff
-
I would like to share something that I'm not happy with and to know if there is a way to fix it. First of all, I have changed my Apple ID from US to Brazil. On Apple's page it is written: "If you changed your Apple ID from one country to another, you
-
Replace invalid XML characters using SQL query
Hi, I am populating a dataset in .net with output from sql 2005 database. One of the columns in the table is a 'varchar(max)' type. This dataset is then converted to XML using WriteXml and written to a .xml document. But due to the presence of inv
-
How to secure the Webdynpro Application name ?
Hi Experts, I have a requirement to send the Webdynpro Application name to Outlook inbox where the users will logs into that application and they will see the view the data and clicks on some action(Approve or Reject). Now the my client does not wa