HT2953 i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can  anyone please help?

i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can  anyone please help?

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

Similar Messages

  • The song could not be used because the original file couldn't be found

    About a week or two ago I loaded up my iTunes to find that most of my music could not be played. Upon clicking on the songs I got the message "The song '__' could not be used because the original file could not be found. Would you like to locate it?" This was weird because none of my music was missing from my computer and it was in the same file location that it has been in all along. I went into the preferences and noticed that the iTunes media file location was different and I changed it back to what it was before. This helped with about half of the files but I still have about 1500 that I will have to "locate" in order to play. This is a solution, but unfortunately it is very time consuming. Does anyone have a solution that could ultimately fix this and save me the time?
    Thanks,
    Stunray
    Message was edited by: Stunray

    *Adding new items/removing orphans*
    Try iTunes Folder Watch or iTunes Library Updater. Folder Watch is much faster on the adding files front, can be set to run in the background and includes a useful exclusion feature, however it’s really slow at removing orphans. iTLU is better for this although doing it manually after looking at a list of proposed removals generated by Folder Watch is probably faster still. iTLU can also be set to update iTunes when you've used 3rd party tools to change tag info.
    tt2

  • Some of the songs I have downloaded onto i tunes won't play when I select it to do so.  The error message I get is "The song could not be used because the original file could not be found.  Would you like to locate it?"  How can I get my songs to play?

    Some of the songs I have downloaded into i tunes won't play when I select it to do so.  The error message I get is "The song can not be used because the original file can not be found.  Would you like to locate it?"  When I select yes I'm sent to a screen that has my i tunes library listed.  When I select the song in question I'm asked if I would like to open the song.  When I select this option I get nothing.  The songs I have downloaded must be somewhere because they are listed in my i tunes library and on the screen I've been sent to.  I can't the songs to play however.  This is not true of all of my songs but it is true of quite a few of them.  Actually, one song is too many.    How do I get my music to play that seems to be locked up somewhere in the computer?

    Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

  • I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found.  Would you like to locate it now?"  It happens on all my tunes and each one I select ends up with a "?"

    I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found.  Would you like to locate it now?"  It happens on each tune I select and a "?" appears beside the song.  Does this sound familiar to anyone?

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • HT204406 I opened i Tunes on my mac and while i see the songs in some of my playlists they will not play. The computer says the song could not be used because the original file could not be found. Would you like to locate it? When i do it won't play.

    I opened i Tunes on my mac and while i see the songs in some of my playlists they will not play. The computer says the song could not be used because the original file could not be found. Would you like to locate it? When i do it won't play.

    You will need to locate where you itunes library is and then relink one of the songs, itunes will do the rest. So if your itunes library is on an external hard drive or something like that. When you get the error message click yes you would like to locate it. then navigate to the external hard drive where the itunes libray is and locate that particular song. Once you have linked one, itunes will ask if you would like it to locate the rest, click yes and it will find the rest of the files if they are in the same location.

  • HT204406 The song "If We Are the Body" could not be used because the original file could not be found. Would you like to locate it?  This notice keeps coming up even though I have iTunes Match.  What do I do?

    The song “If We Are the Body” could not be used because the original file could not be found. Would you like to locate it?  This notice keeps coming up even though I have iTunes Match.  What do I do?

    This usually means the original music file has been been deleted from the HDD. If you feel it has not then click "locate" and navigate to where the song file is on the HDD and choose it. You can use Spotlight to locate it if necessary.

  • Since i download the new version of i tunes i canot play the songs of my library...it say that "the song could not be used because the original file could not be found" what i do to just play the songs directly? please someone help

    since i download the new version of i tunes i canot play the songs of my library....it say "the song could not be used because the original file could not be found".
    would you like to locate it.i just want to play directly..what i do?  please help  thanks

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

    I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
    "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
                  Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
    If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
    I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be  wonderful.
                 I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                      ThanQ SO very much!
                                                                             [email protected] or [email protected] or [email protected] .
                                                                                               You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                                that's my Facebook "handle".    ThanQ 4 taking the time 2 read all of this!
                                                                                                hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                                as marking this page in my FAVORITES so I can find it fast! Take Care!!!

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  need help

    I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  But when I have my external hard drive plug in the song will play with no problem.  What do I need to do to play my music without having the external harddrive plug in ????????  Please help

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • Error message when trying to play music on computer states The song ... could not be used because the original file could not be found.  However, my library shows how many items and the GBs used.  How do I locate the files?

    When I try to play my iTunes music on my computer, an error message comes up and state "The song (title of song) could not be used because the original file could not be found.  Would you like to locate it?
    When I click on Locate It, I cannot find where the music file may be located.  Does anyone have any suggestions?
    This all occurred when I attempted to do a backup to an external hard drive.  Unbeknownest to me, the files did not copy over and do not appear on the external hard drive. 
    When I open my iTunes library, at the bottom of my music list it shows how many songs and the GBs, so it appears that the files are still there; however, cannot be located.
    Thank you.

    Hi angela dfromtx,
    When tracks in iTunes display a it means the file cannot be located; it may have been moved or deleted. You'll have to locate the file manually if it is still available. For more information refer to the following article:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Alternatively, if your media was downloaded from the iTunes Store, you may be able to download it again free of charge:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • After installing iTunes 10.5 update i get the following message when trying to play any song in my Library "The song could not be used because the original file could not be found. Would you like to locate it?"  how do i fix this??

    I have an iPod Classic and work on Windows 7.
    i recently installed iTunes 10.5 update and since then i cannot play any of the songs in the Library - i get the following message
    "The song could not be used because the original file could not be found.  Would you like to locate it?"
    what happened to all my songs (almost 2000) How can i get them back into my music library?
    Please help - i do not want to spend another week downloading all my cd's onto my computer !!!!!

    Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
    tt2

  • Recently bought  a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found."

    Recently bought  a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found. Would you like to locate it?" Hope you can help me solve this issue.
    Thanks,
    Shellyboo

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • I cannot play music from my library on either my external drive or my laptop - keep getting same message "___ song (all of them) could not be used because the original file could not be found. I have tried changing the path in prefernces many times.

    I cannot play music from my libray on either my external drive or my laptop. I keep getting the same message - "___ song (all of them) could not be used because the original file could not be found. Would you like to locate it?" I have changed the path several times under preferences and it still won't recognize any songs from either my laptop hard drive or my external drive. I can't play any music at all.

    I think I've fixed this on my machine.  If you look in the ITunes folder there is a subfolder called Previous iTunes Libraries.  In my case for some reason this contained the one which had always worked and a new one was in the main  folder.  I closed iTunes, deleted the new one, and moved the old one back to the main folder, then opened iTunes.  It then rebuilt the library and it plays correctly.  Hope it works for you.

  • I have a new computer that downloaded all of my playlist. but i cannot play all songs. i get a error that say "the song could not be used because the original file could not be found. would you like to locate it? but it does not help to resolve.

    i installed itunes to my new computer and transfered all my playlist from the older computer. the software came with the new computer hp link up. the problem
    comes in where i want to play a certain song on a playlist and this error pops up "the song could not be used because the original file could not be found.
    would you like to locate it? which is of no help.
    is there a solution to this problem?

    The file path for these songs IS NOT correct per your iTunes Library file. 
    See: http://dougscripts.com/itunes/scripts/ss.php?sp=listmias  for an Applescript to locate these files for re-adding.

  • I downloaded the new version of iTunes and now over 100 songs have an exclamation mark beside them and won't play. The message says: "The song ... could not be used because the original file could not be found." How do I get these songs back?

    I downloaded the new version of iTunes and now over 100 songs have an exclamation mark beside them and won't play. The message says: "The song ... could not be used because the original file could not be found." How do I get these songs back?

    Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

Maybe you are looking for

  • Foreign Exchange Gain Loss not getting booked

    ECC 6.0 Configured A.  OB59 - BSK,EVR,KT0 B.  FS00 - 5800000 Foreign Exchange maintained in Local Currency, Automatic Posting is Ticked C.  FBKP - KDF Linked to 5800000 for Vendor Reconciliation Account Invoice USD @40 Making Payment in F-53 USD @45

  • Yesterday I was able to connect Azure SQL Database - Today I am not

    Hello Everyone, I have problem with establishing connection with Azure SQL Database. I have read many articles here, tried some solutions but none worked. 0. On last Friday everything worked well - today it does not. 1. I added my public IP Address i

  • File with a question mark

    During start up I get a file with a question mark.  I ran Disk Utility and it said Hard Drive is fine.  Any suggestions?

  • Problem with FQDN when creating Web Dynpro App

    Hi @ all, when create a WDA the url is set like this: HTTP://SAPVM1:8000/sap/bc/webdynpro/sap/z_wda_sample. I defined the icm/host_name_full and the SAPLOCALHOSTFULL correct*, but it did not work. I have also restarted the system more than one time.

  • How do I burn a slideshow to a DVD

    MBP 10.9.1 with external USB Super Drive.  As an experiment, I created a slide show of 8 photos using Photoshop Elements 12 and then burned it to a DVD.  When I play the DVD on the laptop I see the the 8 photos.  But when I play the DVD on the DVR/TV