HT2953 imported songs says they are unavailable
I have a CD, I can play in my car and in my changer at home. However when I try to import the CD on Itunes it imports it in about two seconds and then under time it says "Not Available". When I try to play the songs it just runs through them and starts playing on the album after it. I also tried to play this in Windows Media. It recognized the album but wouldn't play the songs...said something about changing from digital to analog... It acted this way on two different computers.
Any imput?
Hey guys
I had this exact problem. For some reason my laptop drive wouldn't rip Led Zeppelin vols 1, 2 and 4, AC/DC or Bad Company onto Itunes. But Led Zeppelin vol 4, Black Sabbath and Mick Hucknall were ok. WHY?!?!?! Is Apple now trying to censor my taste in music?!?!
None of the solutions here worked for me. However I have now managed to get it to work. I plugged in an old external CD drive into my laptop via USB and it worked perfectly on all the CDs that previously wouldn't rip.
There's nothing wrong with my laptop drive though; it has ripped loads of other stuff this evening no problem, just not some of the older CDs for some reason.
Anyway, this is the first time I have found a solution to a problem like this myself, usually the forums provide the answer. So I thought I'd post it in case this helps someone else out. I really hope it does.
Cheers.
Michael
Similar Messages
-
Songs say they are playing but wont play
Please anyone who think they can help My new nano that i have only owned for 3 months says it is playing a song but it wont actually play it. I have tryed everything i can think of and nothing has worked.
ok m8 i had this do a full reset on ipod and it should work menu and centre at same time
-
I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !
I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files? -
I have a bunch of songs that show up under my purchased list and they say they are downloaded. But when I try to play them in itunes it says it can't locate them. How do I correct this?
Welcome to Apple Communities
Select the songs and go to Edit > Delete. Then, download the music in iTunes Store -
itunes imports cd; but they are all small files, and incomplete. Itunes plays neither the cd nor the imported songs. Anyone else faced this issue?
i've had this happen when the cd is extremely dirty. usually only one or two tracks though, not a whole cd.
-
I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?
Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go. -
IPod screen shows no songs after sync, but iTunes says they are there
After syncing my iPod to my iTunes, the menu on the iPod shows no songs. iTunes says they are there and so does Winamp, but I can't see them by navigating the menu.
The only things that changed since my last sync are some ratings and a new playlist.
This has happened to me before. Usually it is resolved by rebooting my PC to make sure the iPod drivers are loaded. I tried rebooting my iPod (holding down Menu and Select), but that didn't do it either. I would like to avoid having to wipe the iPod and re-copy everything. And since this has happened before, it will probably happen again.
I can't upgrade my iTunes to the latest version because Apple stopped releasing W2k versions. Thanks in advance.
-AlanI have that issue also. I ripped a few cd's, attached the ipod, synced it, but my libraries disappeared. "About" says there's 20+ gigs of something on there, but nothing in any menu. I scanned the ipod with Panda, no malware. I took the ipod to Geek Squad, and the Head Geek suggested reformatting from windows, and then reinstalling software with itunes. Did that, hour later, same situation. 20 gigs of nothing, even though itunes reported it had transferred over 6,000 mp3's. Ipod just isn't recognizing anything on it as music, but it worked fine up until the re-sync, and I hadn't done it for awhile, so I am now guessing there's a bug in the newest software, and it isn't a hardware issue at all.
On another note entirely, does anyone else find it strange that Apple's discussion page spell checker regards ipod and itunes as misspelled words?
Ed -
iTunes Store is not letting me purchase any songs. When I download them it says something about security questions and when I type them in it says they are incorrect when they are! Hiw can I download song?
Click here and search the article for '2 out of 3' without the quotes; in the case of forgotten answers, this generally involves either a message being sent to your rescue email address or contacting the iTunes Store staff directly.
(74834) -
before plugging my phone to itunes i downoaded three songs, but they are no longer on my phone, How do i get them back because when i go to itunes on my phone it says purchased but the song arent present
Reset my homescreen settings and got it to work. Thanks
-
The pictures I'm trying to transfer from my camera to Iphoto are coming up blank with a message saying they are in an unrecognized format. I see others have the same problem but I haven't found a solution that works. Any ideas?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
Referenced Images Say They are Referenced But Are Not.
Is anyone having the following problem? I have about 4500 images that were Imported into Aperture as Referenced. Have been working with them over the past month. Tried making a Web Journal recently and after exporting the pages, many of the images did not show up in the web pages although the caption did. I went back to my Album and went through the images. The ones that didn't show up in the web pages were very strange looking within the Album. As a thumbnail they looked fine but when I put the loupe on them at 100% it was obvious that they were some sort of small jpeg or something due to lots of jaggies and poor quality. Even though the Reference icon was supposedly fine, telling me it was online since it did not have a yellow warning label, for some reason Aperture was not accessing the original RAW file.
I now have hundreds of images I have to try and find in the Album that say they are referenced but really are not.
Prior to this web journal problem showing up Aperture had been showing me many of these files were not online even though the drive was definitely hooked to the computer and I was able to go to the same images via the Finder and actually see that they were there. One minute the overall project registered images offline, I would click on an Album and they would register as Online. Then switch back to the Project and amazingly they register as online. Back down to the Album and it tells me they are off line. Back and forth from project to album and a different icon 50% of the time. I knew something was up.
I eventually tracked down many of the images that said they were online but by reviewing them it was obvious they were not due to the jaggies I mentioned above. When I would find one like this I went to Manage Referenced Photos and reconnected the image even though it's telling me it is already connected. After doing this to many of the images I reproduced the web pages and they then showed up. I nearly had all the images showing up except for one that I must have missed in reconnecting so I went back to do just that. As I scrolled through the Album and the Web Journal, many of the thumbnails would turn gray and then finally an image would show up. This happened to dozens of images. I found the one that had not shown up in the last export of the web pages, reconnected it (even though it said it was connected) and then exported the web pages again. Unfortunately I was back to square one. Once again dozens of images were now not showing up in the export of the web pages again.
I just can't believe how buggy 1.5.2 seems to be. I thought maybe it was something to do with Repairing Permissions so I went and did all of that. Still no luck! Anyone else experience anything like this? I'm about ready to give up on this software.Victor,
Yes larger hard drives will help but the day they are large enough to fit in a laptop with a professional photographers entire collection is a long way off and may never happen. There is no reason why Referenced files needs to be so difficult. Two quality programs that handled it with ease was RAW Shooter (now gone having been bought by Adobe) and Photo Mechanic which is superb for some tasks. For Aperture to have this many issues with referencing images is unacceptable and the market place will bear this out. I've quite using the program all together and have gone back to Photo Mechanic combined with IView and Photoshop. There's still room for an Aperture like product but Apple better get moving to make it work better. Microsoft just announced some of the upcoming IView capabilities that will be available next year. Adobe has CS3 and Lightrooom and I'm guessing Photo Mechanic isn't resting on it's heels. I really, really wanted to like Aperture and I worked with it day in and day out for nearly two months. As time went on the Referenced files just kept getting more and more unstable and I lost a ton of work due to it no longer being able to see some of those files.
MacBook Pro Mac OS X (10.4.7)
MacBook Pro Mac OS X (10.4.7)
MacBook Pro Mac OS X (10.4.7) -
Me or my pc can't see my songs, but they are still on my Ipod.
Me or my pc can't see my songs, but they are still on my Ipod.
I've connected my Ipod to my pc, and suddenly there were no songs left, but when I checked it, was the memory still full, like before.
I've disconnected my Ipod and suddenly there were also no songs on my Ipod aswell.
please help me!!"There should be a solution I think"
Yes, to restore the iPod and reload the songs with whatever program you use to put songs on the iPod.
How do you manage to use iPod Agent to transfer songs to the iPod since this is what it says in the iPod Agent FAQ?
"iPod Agent is not a music manager. It does not provide the ability to organize your music and transfer it to your iPod. Apple's own iTunes does a great job of this and thus we don't see a reason to try to duplicate it's functionality. iPod Agent is meant to work hand-in-hand with iTunes."
If you don't use iTunes, what "library" do you use? -
trying to add podcasts to shuffle I tunes says they are there but when I play them only a few are available?
Hello rhdarby2,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPod shuffle: Playing audiobooks and podcasts
http://support.apple.com/kb/HT1831
Adding Audiobooks and Podcasts to iPod shuffle
The Autofill feature of iTunes will not add audiobooks and podcasts to any iPod model. They can be manually added by dragging them to the iPod shuffle in iTunes.
For iPod shuffle (3rd generation), you must enable Manually manage music in the Summary tab to drag songs to iPod shuffle. Additionally, you can automatically sync audiobooks using the Music tab and sync podcasts using the Podcasts tab in iTunes.
Have a nice day,
Mario -
When I try to view my photos it says they are offline.
When I try to open my pictures it says they are offline, how do I correct this?
You could also try the following so see if you can recover your photos. If they are in the Masters or Original folder of your library but can't be recovered by the conventional rebuild/repair procedures perhaps this method will get them for you.
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT -
My apps say they are "waiting" and they have been for days updating. They must be stuck. Not all of them but about 10 that ia am waiting on. Does anyone know what do do about this?
Just to add a couple of more things that you can try ... Along with what TMM suggested ....
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
You can also try updating from the app description page rather than the Updates Tab. Do a search for the apps that needs to be updated - when it appears in the search - tap on the app icon. Then tap on Update or Install - whatever happens to appear next to the app icon - in the description page that pops up.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
Maybe you are looking for
-
Can't find printer over and over again
Every time I try to print, I have to use the Wireless Setup Wizard AGAIN and type in my network password AGAIN until my computer finds my printer AGAIN. Then I can print.... until I can't AGAIN and I have to do all this AGAIN. This has become a roy
-
I have a full screen Frame that won't display a List when I add it
import java.awt.*; import java.awt.event.*; import java.io.*; import javax.imageio.ImageIO; import javax.swing.*; import java.net.Socket; import java.net.InetAddress; import java.util.Scanner; public class Main { //the Main Frame to draw to s
-
hie gurus after altering a field structure for BSEG i have noticed that some transactions went missing however i was able to get some of them from tables BKPF(document header) BSIS(2ndry index for G/L accounts) and BSAS(2ndry index for cleared items)
-
[Solved] Parsing findmnt output?... Is it reliable/portable in bash.
Solution/better suggestion in second post... There seems to be little about using anything other than the output of mount or fstab when dealing with filesystems in scripting. Most of what I've read on it uses awk or cut for parsing "mount" but what a
-
How to use Oracle Reports in an enterprise app, wrt file i/o?
How are people architecting their enterprise applications to make use of Oracle Reports, with respect to transmission of the output? Do you have session beans which call the Oracle Reports JSP pages, and have them write the output to file names, the